Page 86 / 112
Scroll up to view Page 81 - 85
TL-WR841N/TL-WR841ND
300Mbps Wireless N Router User Guide
- 77 -
z
Delete
-
Delete the item.
Click the
Bind All
button to bind all the current items, available after enable.
Click the
Load All
button to load all items to the IP & MAC Binding list.
Click the
Refresh
button to refresh all items.
)
Note:
An item could not be loaded to the IP & MAC Binding list if the IP address of the item has been
loaded before. Error warning will prompt as well. Likewise, "Load All" only loads the items without
interference to the IP & MAC Binding list.
4.15 Dynamic DNS
Choose menu “
Dynamic DNS
”, and you can configure the Dynamic DNS function.
The Router offers the
DDNS
(Dynamic Domain Name System) feature, which allows the hosting
of a website, FTP server, or e-mail server with a fixed domain name (named by yourself) and a
dynamic IP address, and then your friends can connect to your server by entering your domain
name no matter what your IP address is. Before using this feature, you need to sign up for DDNS
service providers such as
www.comexe.cn
,
www.dyndns.org
, or
www.no-ip.com
. The Dynamic
DNS client service provider will give you a password or key.
4.15.1 Comexe.cn DDNS
If the dynamic DNS
Service Provider
you select is
www.comexe.cn
, the page will appear as
shown in
Figure 4-73
.
Page 87 / 112
TL-WR841N/TL-WR841ND
300Mbps Wireless N Router User Guide
- 78 -
Figure 4-73 Comexe.cn DDNS Settings
To set up for DDNS, follow these instructions:
1.
Type the
Domain Name
received from your dynamic DNS service provider.
2.
Type the
User Name
for your DDNS account.
3.
Type the
Password
for your DDNS account.
4.
Click the
Login
button to log in to the DDNS service.
Connection Status -
The status of the DDNS service connection is displayed here.
Click
Logout
to log out of the DDNS service.
4.15.2 Dyndns.org DDNS
If the dynamic DNS
Service Provider
you select is
www.dyndns.org
, the page will appear as
shown in Figure 4-74.
Page 88 / 112
TL-WR841N/TL-WR841ND
300Mbps Wireless N Router User Guide
- 79 -
Figure 4-74
Dyndns.org DDNS Settings
To set up for DDNS, follow these instructions:
1.
Type the
User Name
for your DDNS account.
2.
Type the
Password
for your DDNS account.
3.
Type the
Domain Name
you received from dynamic DNS service provider here.
4.
Click the
Login
button to log in to the DDNS service.
Connection Status -
The status of the DDNS service connection is displayed here.
Click
Logout
to logout of the DDNS service.
4.15.3 No-ip.com DDNS
If the dynamic DNS
Service Provider
you select is
www.no-ip.com
, the page will appear as
shown in Figure 4-75.
Figure 4-75 No-ip.com DDNS Settings
Page 89 / 112
TL-WR841N/TL-WR841ND
300Mbps Wireless N Router User Guide
- 80 -
To set up for DDNS, follow these instructions:
1.
Type the
User Name
for your DDNS account.
2.
Type the
Password
for your DDNS account.
3.
Type the
Domain Name
you received from dynamic DNS service provider.
4.
Click the
Login
button to log in the DDNS service.
Connection Status -
The status of the DDNS service connection is displayed here.
Click
Logout
to log out the DDNS service.
4.16 System Tools
Figure 4-76 The System Tools menu
Choose menu “
System Tools
”, and you can see the submenus under the main menu:
Time
Settings
,
Diagnostic
,
Firmware Upgrade
,
Factory Defaults, Backup & Restore, Reboot,
Password, System Log
and
Statistics.
Click any of them, and you will be able to configure the
corresponding function. The detailed explanations for each submenu are provided below.
4.16.1 Time Settings
Choose menu “
System Tools
→
Time Settings
”, you can configure the time on the following
screen.
Page 90 / 112
TL-WR841N/TL-WR841ND
300Mbps Wireless N Router User Guide
- 81 -
Figure 4-77
Time settings
¾
Time zone -
Select your local time zone from this drop-down list.
¾
Date -
Enter your local date in MM/DD/YY into the right blanks.
¾
Time -
Enter your local time in HH/MM/SS into the right blanks.
¾
NTP Server 1 / NTP Server 2 -
Enter the address or domain of the
NTP Server 1
or
NTP
Server 2
, and then the Router will get the time from the NTP Server preferentially. In addition,
the Router built-in some common NTP Servers, so it can get time automatically once it
connects the Internet.
¾
Enable Daylight Saving -
Check the box to enable the Daylight Saving function.
¾
Start -
The time to start the Daylight Saving. Select the month in the first field, the week in the
second field, the day in the third field and the time in the last field.
¾
End -
The time to end the Daylight Saving. Select the month in the first field, the week in the
second field, the day in the third field and the time in the last field.
¾
Daylight Saving Status -
Displays the status whether the Daylight Saving is in use.
To set time manually:
1.
Select your local time zone.
2.
Enter the
Date
in Month/Day/Year format.
3.
Enter the
Time
in Hour/Minute/Second format.
4.
Click
Save
.
19216811.live