TP-Link TL-WR840N Router Manual PDF (Setup & Configuration Guide)

Page 76 / 104 Scroll up to view Page 71 - 75

TL-WR840N

300Mbps Wireless N Router User Guide

- 67 -



Destination Network

-

The

Destination Network

is the address of the network or host

that you want to assign to a static route.



Subnet Mask

-

The

Subnet Mask

determines which portion of an IP Address is the

network portion, and which portion is the host portion.



Default Gateway

-

This is the IP Address of the default gateway device that allows for the

contact between the Router and the network or host.

3.

Select

Enabled

or

Disabled

for this entry on the

Status

drop-down list.

4.

Click the

Save

button to make the entry take effect.

Click the

Delete

button to delete the entry.

Click the

Enable All

button to enable all the entries.

Click the

Disable All

button to disable all the entries.

Click the

Delete All

button to delete all the entries.

Click the

view the information in the next screen.

4.12.2 System Routing Table

Choose menu

“Advanced Routing

→

System Routing Table

”, and you can views all of the

valid route entries in use. The Destination IP address, Subnet Mask, Gateway, and Interface will

be displayed for each entry.



Destination Network -

The Destination Network is the address of the network or host to

which the static route is assigned.



Subnet Mask -

The Subnet Mask determines which portion of an IP address is the network

portion, and which portion is the host portion.



Gateway -

This is the IP address of the gateway device that allows for contact between the

Router and the network or host.

Page 77 / 104

TL-WR840N

300Mbps Wireless N Router User Guide

- 68 -



Interface -

This interface tells you whether the Destination IP Address is on the

LAN &

WLAN

(internal wired and wireless networks), the

WAN(Internet)

.

Click the

Refresh

button to refresh the data displayed.

4.13 Bandwidth Control

Figure 4-63

There are two submenus under the Bandwidth Control menu as shown in Figure 4-63. Click any

of them, and you will be able to configure the corresponding function. The detailed explanations

for each submenu are provided below.

4.13.1 Control Settings

Choose menu “

Bandwidth Control

→

Control Settings

”, you can configure the Egress

Bandwidth and Ingress Bandwidth in the next screen. Their values you configure should be less

than 100000Kbps. For optimal control of the bandwidth, please select the right Line Type and ask

your ISP for the total bandwidth of the egress and ingress.

Figure 4-64 Bandwidth Control Settings



Enable Bandwidth Control -

Check this box so that the Bandwidth Control settings can take

effect.



Line Type

-

Select the right type for you network connection. If you don’t know how to choose,

please ask your ISP for the information.



Egress Bandwidth

- The upload speed through the WAN port

.



Ingress Bandwidth -

The download speed through the WAN port.

4.13.2 Rules List

Choose menu “

Bandwidth Control

→

Rules List

”, you can view and configure the Bandwidth

Control rules in the screen below.

Page 78 / 104

TL-WR840N

300Mbps Wireless N Router User Guide

- 69 -

Figure 4-65 Bandwidth Control Rules List



Description

-

This is the information about the rules such as address range.



Egress bandwidth -

This field displays the max and mix upload bandwidth through the WAN

port, the default is 0.



Ingress bandwidth -

This field displays the max and mix download bandwidth through the

WAN port, the default is 0.



Enable -

This displays the status of the rule.



Modify -

Click

Modify

to edit the rule. Click

Delete

to delete the rule.

To add/modify a Bandwidth Control rule, follow the steps below.

Step 1:

Click

Add New…

shown in Figure 4-65, you will see a new screen shown in Figure 4-66.

Step 2:

Enter the information like the screen shown below.

Figure 4-66 Bandwidth Control Rule Settings

Step 3:

Click the

Save

button.

Page 79 / 104

TL-WR840N

300Mbps Wireless N Router User Guide

- 70 -

4.14 IP & MAC Binding Setting

Figure 4-67 the IP & MAC Binding menu

There are two submenus under the IP &MAC Binding menu (shown in Figure 4-67):

Binding

Settings

and

ARP List

. Click any of them, and you will be able to scan or configure the

corresponding function. The detailed explanations for each submenu are provided below.

4.14.1 Binding Settings

This page displays the

IP & MAC Binding Setting

table; you can operate it in accord with your

desire as shown in Figure 4-68.

Figure 4-68 Binding Settings



MAC Address

-

The MAC address of the controlled computer in the LAN.



IP Address -

The assigned IP address of the controlled computer in the LAN.



Bind

-

Check this option to enable ARP binding for a specific device.



Modify

-

To modify or delete an existing entry.

When you want to add or modify an IP & MAC Binding entry, you can click the

Add New…

button

or

Modify

button, and then you will go to the next page. This page is used for adding or

modifying an IP & MAC Binding entry,

shown in Figure 4-69.

Page 80 / 104

TL-WR840N

300Mbps Wireless N Router User Guide

- 71 -

Figure 4-69 IP & MAC Binding Settings

To add IP & MAC Binding entries, follow the steps below.

1.

Click the

Add New...

button as shown in Figure 4-68.

2.

Enter the MAC Address and IP Address.

3.

Select the

Bind

checkbox.

4.

Click the

Save

button to save it.

To modify or delete an existing entry, follow the steps below.

1.

Find the desired entry in the table.

2.

Click

Modify

or

Delete

as desired on the

Modify

column.

To find an existing entry, follow the steps below.

1.

Click the

Find

button as shown in Figure 4-68.

2.

Enter the MAC Address or IP Address.

3.

Click the

Find

button in the page as shown in Figure 4-70.

Figure 4-70 Find IP & MAC Binding Entry

Click the

Enable All

button to make all entries enabled.

Click the

Delete All

button to delete all entries.

4.14.2 ARP List

To manage the computer, you could observe the computers in the LAN by checking the

relationship of MAC address and IP address on the ARP list, and you could configure the items on

the ARP list also. This page displays the ARP List; it shows all the existing IP & MAC Binding

entries as shown in Figure 4-71.

Rate

Popular TP-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share