Page 26 / 113
Scroll up to view Page 21 - 25
TL-WR740N/TL-WR741ND
150Mbps Wireless N Router
-19-
Step 2.
Press and hold the QSS button of the adapter directly for 2 or 3 seconds.
Step 3. Wait for a while until the next screen appears. Click
Finish
to complete the QSS
configuration.
The QSS Configuration Screen of Wireless Adapter
Method Two:
Step 1.
Press the QSS button on the front panel of the Router.
Page 27 / 113
TL-WR740N/TL-WR741ND
150Mbps Wireless N Router
-20-
Step 2.
For the configuration of the wireless adapter, please choose
Push the button on my
access point
in the configuration utility of the QSS as below, and click
Next
.
The QSS Configuration Screen of Wireless Adapter
Step 3. Wait for a while until the next screen appears. Click
Finish
to complete the QSS
configuration.
The QSS Configuration Screen of Wireless Adapter
Page 28 / 113
TL-WR740N/TL-WR741ND
150Mbps Wireless N Router
-21-
Method Three:
Step 1.
Keep the default QSS Status as
Enabled
and click the
Add device
button in Figure 4-2,
then the following screen will appear.
Figure 4-3
Add A New Device
Step 2. Choose
Press the button of the new device
in two minutes and click
Connect
.
Step 3.
For the configuration of the wireless adapter, please choose
Push the button on my
access point
in the configuration utility of the QSS as below, and click
Next
.
The QSS Configuration Screen of Wireless Adapter
Page 29 / 113
TL-WR740N/TL-WR741ND
150Mbps Wireless N Router
-22-
Step 4. Wait for a while until the next screen appears. Click
Finish
to complete the QSS
configuration.
The QSS Configuration Screen of Wireless Adapter
II.
By PIN
If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the
network by PIN with the following two methods.
Method One:
Enter the PIN into my Router
Step 1.
Keep the default QSS Status as
Enabled
and click the
Add device
button in Figure 4-2,
then the following screen will appear.
Step 2. Choose
Enter the new device's PIN
and enter the PIN code of the wireless adapter in
the field behind PIN in the above figure. Then click
Connect
.
)
Note:
The PIN code of the adapter is always displayed on the QSS configuration screen
Page 30 / 113
TL-WR740N/TL-WR741ND
150Mbps Wireless N Router
-23-
Step 3. For the configuration of the wireless adapter, please choose
Enter a PIN into my
access point or a registrar
in the configuration utility of the QSS as below, and click
Next
.
The QSS Configuration Screen of Wireless Adapter
)
Note:
In this example, the default PIN code of this adapter is 16952898 as the above figure shown.
Method Two:
Enter the PIN from my Router
Step 1.
Get the Current PIN code of the Router in Figure 4-2 (each Router has its unique PIN
code. Here takes the PIN code 12345670 of this Router for example).
Step 2. For the configuration of the wireless adapter, please choose
Enter a PIN from my
access point
in the configuration utility of the QSS as below, and enter the PIN code of
the Router into the field behind Access Point PIN. Then click
Next
.
19216811.live