TL-WR740N/TL-WR741ND

150Mbps Wireless N Router

-19-

Step 2.

Press and hold the QSS button of the adapter directly for 2 or 3 seconds.

Step 3. Wait for a while until the next screen appears. Click

Finish

to complete the QSS

configuration.

The QSS Configuration Screen of Wireless Adapter

Method Two:

Step 1.

Press the QSS button on the front panel of the Router.

TL-WR740N/TL-WR741ND

150Mbps Wireless N Router

-20-

Step 2.

For the configuration of the wireless adapter, please choose

Push the button on my

access point

in the configuration utility of the QSS as below, and click

Next

.

The QSS Configuration Screen of Wireless Adapter

Step 3. Wait for a while until the next screen appears. Click

Finish

to complete the QSS

configuration.

The QSS Configuration Screen of Wireless Adapter

TL-WR740N/TL-WR741ND

150Mbps Wireless N Router

-21-

Method Three:

Step 1.

Keep the default QSS Status as

Enabled

and click the

Add device

button in Figure 4-2,

then the following screen will appear.

Figure 4-3

Add A New Device

Step 2. Choose

Press the button of the new device

in two minutes and click

Connect

.

Step 3.

For the configuration of the wireless adapter, please choose

Push the button on my

access point

in the configuration utility of the QSS as below, and click

Next

.

The QSS Configuration Screen of Wireless Adapter

TL-WR740N/TL-WR741ND

150Mbps Wireless N Router

-22-

Step 4. Wait for a while until the next screen appears. Click

Finish

to complete the QSS

configuration.

The QSS Configuration Screen of Wireless Adapter

II.

By PIN

If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the

network by PIN with the following two methods.

Method One:

Enter the PIN into my Router

Step 1.

Keep the default QSS Status as

Enabled

and click the

Add device

button in Figure 4-2,

then the following screen will appear.

Step 2. Choose

Enter the new device's PIN

and enter the PIN code of the wireless adapter in

the field behind PIN in the above figure. Then click

Connect

.

)

Note:

The PIN code of the adapter is always displayed on the QSS configuration screen

TL-WR740N/TL-WR741ND

150Mbps Wireless N Router

-23-

Step 3. For the configuration of the wireless adapter, please choose

Enter a PIN into my

access point or a registrar

in the configuration utility of the QSS as below, and click

Next

.

The QSS Configuration Screen of Wireless Adapter

)

Note:

In this example, the default PIN code of this adapter is 16952898 as the above figure shown.

Method Two:

Enter the PIN from my Router

Step 1.

Get the Current PIN code of the Router in Figure 4-2 (each Router has its unique PIN

code. Here takes the PIN code 12345670 of this Router for example).

Step 2. For the configuration of the wireless adapter, please choose

Enter a PIN from my

access point

in the configuration utility of the QSS as below, and enter the PIN code of

the Router into the field behind Access Point PIN. Then click

Next

.