Page 76 / 113 Scroll up to view Page 71 - 75
TL-WR740N/TL-WR741ND
150Mbps Wireless N Router
-69-
4.11.2 Host
Choose menu “
Access Control
Host
”, and then you can view and set a Host list in the
screen as shown in Figure 4-66. The host list is necessary for the Access Control Rule.
Figure 4-66
Host Settings
¾
Host Description -
Here displays the description of the host and this description is unique.
¾
Information -
Here displays the information about the host. It can be IP or MAC.
¾
Modify -
To modify or delete an existing entry.
To add a new entry, please follow the steps below.
1.
Click the
Add New…
button.
2.
In the
Mode
field, select IP Address or MAC Address.
z
If you select IP Address, the screen shown is Figure 4-67.
1) In
Host Description
field, create a unique description for the host (e.g. Host_1).
2) In
LAN IP Address
field, enter the IP address.
z
If you select MAC Address, the screen shown is Figure 4-68.
1) In
Host Description
field, create a unique description for the host (e.g. Host_1).
2) In
MAC Address
field, enter the MAC address.
3.
Click the
Save
button to complete the settings.
Click the
Delete All
button to delete all the entries in the table.
Click the
Next
button to go to the next page, or click the
Previous
button to return to the previous
page.
Figure 4-67
Add or Modify a Host Entry
Page 77 / 113
TL-WR740N/TL-WR741ND
150Mbps Wireless N Router
-70-
Figure 4-68
Add or Modify a Host Entry
For example
: If you desire to restrict the internet activities of host with MAC address
00-11-22-33-44-AA, you should first follow the settings below:
1. Click
Add New...
button in Figure 4-66 to enter the Add or Modify a Host Entry page.
2. In
Mode
field, select MAC Address from the drop-down list.
3. In
Host Description
field, create a
unique
description for the host (e.g. Host_1).
4. In
MAC Address
field, enter 00-11-22-33-44-AA.
5. Click
Save
to complete the settings.
Then you will go back to the Host Settings page and see the following list.
4.11.3 Target
Choose menu “
Access Control
Target
”, and then you can view and set a Target list in the
screen as shown in Figure 4-69. The target list is necessary for the Access Control Rule.
Figure 4-69
Target Settings
¾
Target Description -
Here displays the description about the target and this description is
unique.
¾
Information -
The target can be IP address, port, or domain name.
¾
Modify -
To modify or delete an existing entry.
To add a new entry, please follow the steps below.
1.
Click the
Add New…
button.
Page 78 / 113
TL-WR740N/TL-WR741ND
150Mbps Wireless N Router
-71-
2.
In Mode field, select
IP Address
or
Domain Name
.
3.
If you select
IP Address
, the screen shown is Figure 4-70.
Figure 4-70
Add or Modify an Access Target Entry
1) In
Target Description
field, create a unique description for the target (e.g.
Target_1).
2) In
IP Address
field, enter the IP address of the target.
3) Select a common service from
Common Service Port
drop-down list, so that the
Target Port
will be automatically filled. If the
Common Service Port
drop-down list
doesn’t have the service you want, specify the
Target Port
manually.
4) In
Protocol
field, select TCP, UDP, ICMP or ALL from the drop-down list.
4.
If you select
Domain Name
, the screen shown is Figure 4-71.
Figure 4-71
Add or Modify an Access Target Entry
1) In
Target Description
field, create a unique description for the target (e.g.
Target_1).
2) In
Domain Name
field, enter the domain name, either the full name or the keywords
(for example, google) in the blank. Any domain name with keywords in it
Page 79 / 113
TL-WR740N/TL-WR741ND
150Mbps Wireless N Router
-72-
(www.google.com, www.google.cn) will be blocked or allowed. You can enter 4
domain names.
5.
Click the
Save
button.
Click the
Delete All
button to delete all the entries in the table.
Click the
Next
button to go to the next page, or click the
Previous
button to return to the previous
page.
For example
: If you desire to restrict the internet activities of host with MAC address
00-11-22-33-44-AA in the LAN to access
www.google.com
only, you should first follow the
settings below:
1. Click
Add New…
button in Figure 4-69 to enter the Add or Modify an Access Target
Entry page.
2. In
Mode
field, select Domain Name from the drop-down list.
3. In
Target Description
field, create a unique description for the target (e.g. Target_1).
4. In
Domain Name
field, enter www.google.com.
5. Click
Save
to complete the settings.
Then you will go back to the Target Settings page and see the following list.
4.11.4 Schedule
Choose menu “
Access Control
Schedule
”, and then you can view and set a Schedule list in
the next screen as shown in Figure 4-72. The Schedule list is necessary for the Access Control
Rule.
Figure 4-72
Schedule Settings
¾
Schedule Description
- Here displays the description of the schedule and this description is
unique.
¾
Day
- Here displays the day(s) in a week.
¾
Time
- Here displays the time period in a day.
¾
Modify
- Here you can edit or delete an existing schedule.
Page 80 / 113
TL-WR740N/TL-WR741ND
150Mbps Wireless N Router
-73-
To add a new schedule, follow the steps below:
1. Click
Add New...
button shown in Figure 4-72 and the next screen will pop-up as shown in
Figure 4-73.
2. In
Schedule Description
field, create a unique description for the schedule (e.g.
Schedule_1).
3. In
Day
field, select the day or days you need.
4. In
Time
field, you can select all day-24 hours or you may enter the Start Time and Stop Time
in the corresponding field.
5. Click
Save
to complete the settings.
Click the
Delete All
button to delete all the entries in the table.
Click the
Next
button to go to the next page, or click the
Previous
button to return to the previous
page.
Figure 4-73
Advanced Schedule Settings
For example
: If you desire to restrict the internet activities of host with MAC address
00-11-22-33-44-AA to access
www.google.com
only from
18:00 to 20:00
on
Saturday
and
Sunday
, you should first follow the settings below:
1) Click
Add New...
button shown in Figure 4-72 to enter the Advanced Schedule Settings
page.
2) In
Schedule Description
field, create a unique description for the schedule (e.g.
Schedule_1).
3) In
Day
field, check the Select Days
radio button and then select Sat and Sun.
4) In
Time
field, enter 1800 in Start Time field and 2000 in Stop Time field.
5) Click
Save
to complete the settings.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top