TP-Link TL-WR720N Router Manual PDF (Setup & Configuration Guide)

Page 81 / 109 Scroll up to view Page 76 - 80

TL-WR720N

150Mbps Wireless N Router

1.

Click the

Modify

in the entry you want to modify. If you want to delete the entry, click the

Delete

.

2.

Modify the information.

3.

Click the

Save

button.

Click the

Enable All

button to make all entries enabled.

Click the

Disabled All

button to make all entries disabled.

Click the

Delete All

button to delete all entries.

4.13 IP QoS

You can configure the IP QoS function on this page.

Figure 4-69 IP QoS

¾

Enable IP QoS -

Enable or disable the function of IP QoS.

¾

Choose BandWidth Type -

Select the network connection type from the drop-down list.

¾

Bandwidth Apply -

The bandwidth you get. If you are not clear about that, please contact

with your ISP for help.

¾

IP Range -

IP range of this entry.

¾

Mode -

There are two types of mode: Minimum Bandwidth Guarantee and Maximum

Bandwidth Limit.

¾

Bandwidth -

The bandwidth you supply to this entry.

¾

Description -

The description for this entry.

-73-

Page 82 / 109

TL-WR720N

150Mbps Wireless N Router

Click

Enable

to enable this entry.

Click the

Clear

button to clear a single entry.

Click the

Clear All

button to clear all entries.

Click the

Save

button to save all configurations.

)

Note:

1.

The conversion relation of bandwidth: 1Mbps = 1000Kbps.

2.

Please choose the Network Connection Type and set the bandwidth according to your

Network. If you are not clear about that, please contact with your ISP for help.

3.

If no IP QoS item is enabled, the Bandwidth Apply won't be effective.

4.

IP address range for different entries could not have intersection with each other.

5.

After the configurations, click the

Save

button for the change to take effect.

4.14 IP & MAC Binding

Figure 4-70 the IP & MAC Binding menu

There are two submenus under the IP &MAC Binding menu (shown in Figure 4-70):

Binding

Settings

and

ARP List

. Click any of them, and you will be able to scan or configure the

corresponding function. The detailed explanations for each submenu are provided below.

4.14.1 Binding Settings

This page displays the

IP & MAC Binding Setting

table; you can operate it in accord with your

desire (shown in

Figure 4-71).

Figure 4-71 Binding Setting

¾

MAC Address

-

The MAC address of the controlled computer in the LAN.

¾

IP Address -

The assigned IP address of the controlled computer in the LAN.

-74-

Page 83 / 109

TL-WR720N

150Mbps Wireless N Router

¾

Bind

-

Check this option to enable ARP binding for a specific device.

¾

Modify

-

To modify or delete an existing entry.

When you want to add or modify an IP & MAC Binding entry, you can click the

Add New…

button

or

Modify

button, and then you will go to the next page. This page is used for adding or

modifying an IP & MAC Binding entry

(shown in Figure 4-72).

Figure 4-72

IP & MAC Binding Setting (Add & Modify)

To add IP & MAC Binding entries, follow the steps below.

1.

Click the

Add New...

button as shown in Figure 4-71.

2.

Enter the MAC Address and IP Address.

3.

Select the Bind checkbox.

4.

Click the

Save

button to save it.

To modify or delete an existing entry, follow the steps below.

1.

Find the desired entry in the table.

2.

Click

Modify

or

Delete

as desired on the

Modify

column.

To find an existing entry, follow the steps below.

1.

Click the

Find

button as shown in Figure 4-71.

2.

Enter the MAC Address or IP Address.

3.

Click the

Find

button in the page as shown in Figure 4-73.

-75-

Page 84 / 109

TL-WR720N

150Mbps Wireless N Router

Figure 4-73

Find IP & MAC Binding Entry

Click the

Enable All

button to make all entries enabled.

Click the

Delete All

button to delete all entries.

4.14.2 ARP List

To manage the computer, you could observe the computers in the LAN by checking the

relationship of MAC address and IP address on the ARP list, and you could also configure the

items on the ARP list. This page displays the ARP List; it shows all the existing IP & MAC Binding

entries (shown in Figure 4-74).

Figure 4-74

ARP List

1.

MAC Address

-

The MAC address of the controlled computer in the LAN.

2.

IP Address

-

The assigned IP address of the controlled computer in the LAN.

3.

Status

-

Indicates whether or not the MAC and IP addresses are bound.

4.

Configure

-

Load or delete an item.

¾

Load

-

Load the item to the IP & MAC Binding list.

¾

Delete

-

Delete the item.

Click the

Bind All

button to bind all the current items, available after enable.

Click the

Load All

button to load all items to the IP & MAC Binding list.

Click the

Refresh

button to refresh all items.

)

Note:

An item could not be loaded to the IP & MAC Binding list if the IP address of the item has been

loaded before. Error warning will prompt as well. Likewise, "Load All" only loads the items without

interference to the IP & MAC Binding list.

4.15 Dynamic DNS

The router offers a Dynamic Domain Name System (

DDNS

) feature. DDNS lets you assign a fixed

-76-

Page 85 / 109

TL-WR720N

150Mbps Wireless N Router

host and domain name to a dynamic Internet IP Address. It is useful when you are hosting your

own website, FTP server, or other server behind the router. Before using this feature, you need to

sign up for DDNS service providers such as www.dyndns.org. The Dynamic DNS client service

provider will give you a password or key.

To set up for DDNS, follow these instructions:

4.15.1 Comexe.cn DDNS

If your selected dynamic DNS

Service Provider

is www.comexe.cn, the page will appear as

shown in Figure 4-75:

Figure 4-75 Comexe.cn DDNS Settings

To set up for DDNS, follow these instructions:

1.

Type the

Domain Name

received from your dynamic DNS service provider.

2.

Type the

User Name

for your DDNS account.

3.

Type the

Password

for your DDNS account.

4.

Click the

Login

button to log in to the DDNS service.

Connection Status -

The status of the DDNS service connection is displayed here.

Click

Logout

to log out of the DDNS service.

4.15.2 Dyndns.org DDNS

If your selected dynamic DNS Service Provider is www.dyndns.org, the page will appear as

shown in Figure 4-76:

-77-

Rate

Popular TP-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share