Page 76 / 85
Scroll up to view Page 71 - 75
TL-WR642G
108M Wireless Router User Guide
69
Figure A-5
Add or Modify a Virtual server Entry
)
Note:
Your Netmeeting partner should call your WAN IP, which is displayed on the “Status” page.
4)
How to enable DMZ Host: Login to the router, click the “Forwarding” menu on the left of
your browser, and click "DMZ" submenu. On the "DMZ" page, click “Enable” radio and
type your IP address into the “DMZ Host IP Address” field, using
192.168.1.169 as an
example, remember to click the "Save” button.
Figure A-6
DMZ
4.
I want to build a WEB Server on the LAN, what should I do?
1)
Because the WEB Server port 80 will interfere with the WEB management port 80 on the
router, you must change the WEB management port number to avoid interference.
2)
To change the WEB management port number: Login to the router, click the “Security”
menu on the left of your browser, and click "Remote Management" submenu. On the
"Remote Management" page, type a port number except 80, such as 88, into the "Web
Management Port" field. Click “Save” and reboot the router.
Page 77 / 85
TL-WR642G
108M Wireless Router User Guide
70
Figure A-7
Remote Management
)
Note:
If the above configuration takes effect, to configure to the router by typing
(the router’s LAN IP address: Web Management Port) in the address field of the Web browser.
3)
Login to the router, click the “Forwarding” menu on the left of your browser, and click the
"Virtual Servers" submenu. On the "Virtual Server" page, click
Add New,
then on the
“Add or Modify a Virtual Server” page, enter “80” into the blank behind the “Service Port”,
and your IP address behind the IP Address, assuming
192.168.1.188 for an example,
remember to “Enable” and “Save”.
Figure A-8
Virtual Servers
Figure A-9
Add or Modify a Virtual server Entry
5.
The wireless stations cannot connect to the router.
1)
Make sure the "Wireless Router Radio" is enabled.
2)
Make sure that the wireless stations' SSID accord with the router's SSID.
3)
Make sure the wireless stations have right KEY for encryption when the router is
Page 78 / 85
TL-WR642G
108M Wireless Router User Guide
71
encrypted.
4)
If the wireless connection is ready, but you can’t access the router, check the IP Address
of your wireless stations.
Page 79 / 85
TL-WR642G
108M Wireless Router User Guide
72
Appendix B: Configuring the PCs
In this section, we’ll introduce how to install and configure the TCP/IP correctly in Windows XP.
First make sure your Ethernet Adapter is working, refer to the adapter’s manual if necessary.
1.
Configure TCP/IP component
1)
On the Windows taskbar, click the
Start
button, and then click
Control Panel
.
2)
Click the
Network and Internet Connections
icon, and then click on the
Network
Connections
tab in the appearing window.
3)
Right click the icon that showed below, select Properties on the prompt page.
Figure 62
4)
In the prompt page that showed below, double click on the
Internet Protocol (TCP/IP)
.
Page 80 / 85
TL-WR642G
108M Wireless Router User Guide
73
Figure 63
5)
The following
TCP/IP Properties
window will display and the
IP Address
tab is open on
this window by default.
Now you have two ways to configure the
TCP/IP
protocol below:
¾
Setting IP address automatically
Select
Obtain an IP address automatically
, Choose
Obtain DNS server automatically
, as
shown in the Figure below:
19216811.live