Page 16 / 128 Scroll up to view Page 11 - 15
TL-WR2543ND
450Mbps Dual-Band Wireless N Gigabit Router
- 9 -
)
Note:
If you want to use the Router to share files or printer, plug the USB storage device to the USB port
or connect the printer to the Router with a matching cable.
6.
Connect the power adapter to the power socket on the Router, and the other end into an
electrical outlet. The Router will start to work automatically.
7.
Power on your PC and Cable/DSL Modem.
Figure 2-1
Hardware Installation
Page 17 / 128
TL-WR2543ND
450Mbps Dual-Band Wireless N Gigabit Router
- 10 -
Chapter 3. Quick Installation Guide
This chapter will show you how to configure the basic functions of your
450Mbps Dual-Band
Wireless N Gigabit Router using
Quick Setup
Wizard
within minutes.
3.1
TCP/IP Configuration
The default domain name of the Router is
http://tplinklogin.net
and the default Subnet Mask is
255.255.255.0. These values can be changed as you desire. In this guide, we use all the default
values for description.
Connect the local PC to the LAN ports of the Router and then you can configure the IP address for
your PC by the following method: Set up the TCP/IP Protocol in "
Obtain an IP address
automatically
" mode on your PC. If you need instructions as to how to do this, please refer to
Appendix B: "Configuring the PC”.
Then the built-in DHCP server will assign IP address for the
PC.
Now, you can run the Ping command in the
command prompt
to verify the network connection
between your PC and the Router. The following example is in Windows 2000 OS.
Open a command prompt, and type
, and then press
Enter
.
¾
If the result displayed is similar to the Figure 3-1, it means the connection between your PC
and the Router has been established well.
Figure 3-1
Success result of Ping command
¾
If the result displayed is similar to Figure 3-2, it means the connection between your PC and
Page 18 / 128
TL-WR2543ND
450Mbps Dual-Band Wireless N Gigabit Router
- 11 -
the Router failed.
Figure 3-2
Failure result of Ping command
Please check the connection following these steps:
1.
Is the connection between your PC and the Router correct?
)
Note:
The 1/2/3/4 LEDs of LAN ports which you link to on the Router and LEDs on your PC's adapter
should be lit.
2.
Is the TCP/IP configuration for your PC correct?
)
Note:
If the Router's IP address is 192.168.0.1, your PC's IP address must be within the range of
192.168.0.2 ~ 192.168.0.254.
3.
Is the default LAN IP of the Router correct?
)
Note:
If the LAN IP of the modem connected with your router is 192.168.0.x, the default LAN IP of the
Router will automatically switch from 192.168.0.1 to 192.168.1.1 to avoid IP conflict. Therefore, in
order to verify the network connection between your PC and the Router, you can open a
command prompt, and type
ping 192.168.1.1
, and then press
Enter
.
3.2
Quick Installation Guide
With a Web-based utility, it is easy to configure and manage the
450Mbps Dual-Band Wireless N
Gigabit Router. The Web-based utility can be used on any Windows, Macintosh or UNIX OS with
a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari.
Page 19 / 128
TL-WR2543ND
450Mbps Dual-Band Wireless N Gigabit Router
- 12 -
1.
To access the configuration utility, open a web-browser and type in the default domain name
http://tplinklogin.net
in the address field.
Figure 3-3
Log in the Router
After a moment, a login window will appear, similar to Figure 3-4. Enter
admin
for the User
Name and Password, both in lower case letters. Then click the
OK
button or press the
Enter
key.
Figure 3-4
Login Windows
)
Note:
If the above screen does not pop up, it means that your Web-browser has been set to a proxy.
Go to Tools menu>Internet Options>Connections>LAN Settings, in the screen that appears,
cancel the Using Proxy checkbox, and click OK to finish it.
2.
After successfully log in, you can click the
Quick Setup
menu to quickly configure your
Router.
Page 20 / 128
TL-WR2543ND
450Mbps Dual-Band Wireless N Gigabit Router
- 13 -
Figure 3-5
Quick Setup
3.
Click
Next
, and then
WAN Connection Type
page will appear, shown in Figure 3-6.
Figure 3-6
WAN Connection Type
The Router provides
Auto-Detect
function and supports three popular ways
PPPoE
,
Dynamic IP
and
Static IP
to connect to the Internet. It’s recommended that you make use of
the
Auto-Detect
function. If you are sure of what kind of connection type your ISP provides,
you can select the very type and click
Next
to go on configuring.
4.
If you select
Auto-Detect
, the Router will automatically detect the connection type your ISP
provides. Make sure the cable is securely plugged into the WAN port before detection. The
appropriate configuration page will be displayed when an active Internet service is
successfully detected by the Router.
1)
If the connection type detected is
PPPoE
, the next screen will appear as shown in Figure
3-7.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top