TP-Link TL-WR1043N v2 Kibosh Router Manual PDF (Setup & Configuration Guide)

Page 91 / 122 Scroll up to view Page 86 - 90

TL-WR1043ND

300Mbps Wireless N Gigabit Router

3. In

Day

field, select the day or days you need.

4. In

Time

field, you can select all day-24 hours or you may enter the Start Time and Stop Time

in the corresponding field.

5. Click

Save

to complete the settings.

Click the

Delete All

button to delete all the entries in the table.

Click the

page.

Figure 4-77

Advanced Schedule Settings

For example

: If you desire to restrict the internet activities of host with MAC address

00-11-22-33-44-AA to access

www.google.com

only from

18:00 to 20:00

on

Saturday

and

Sunday

, you should first follow the settings below:

1) Click

Add New...

button shown in Figure 4-76 to enter the Advanced Schedule Settings page.

2) In

Schedule Description

field, create a unique description for the schedule (e.g.

Schedule_1).

3) In

Day

field, check the Select Days

radio button and then select Sat and Sun.

4) In

Time

field, enter 1800 in Start Time field and 2000 in Stop Time field.

5) Click

Save

to complete the settings.

Then you will go back to the Schedule Settings page and see the following list.

-81-

Page 92 / 122

TL-WR1043ND

300Mbps Wireless N Gigabit Router

4.14 Advanced Routing

Figure 4-78 Advanced Routing

There are two submenus under the Advanced Routing menu as shown in Figure 4-78:

Static

Routing List

and

System Routing Table

.

Click any of them, and you will be able to configure the

corresponding function.

4.14.1 Static Routing List

Choose menu “

Advanced Routing

→

Static Routing List

”, and then you can configure the

static route in the next screen (shown in

Figure 4-79

). A static route is a pre-determined path that

network information must travel to reach a specific host or network.

Figure 4-79

Static Routing

To add static routing entries:

1.

Click

Add New…

shown in

Figure 4-79

, you will see the following screen.

Figure 4-80

Add or Modify a Static Route Entry

2.

Enter the following data:



Destination Network

- The Destination Network is the address of the network or host that

you want to assign to a static route.

-82-

Page 93 / 122

TL-WR1043ND

300Mbps Wireless N Gigabit Router



Subnet Mask

-

The

Subnet Mask

determines which portion of an IP Address is the

network portion, and which portion is the host portion.



Default Gateway

- This is the IP Address of the gateway device that allows for contact

between the router and the network or host.

3.

Select

Enabled

or

Disabled

for this entry on the

Status

drop-down list.

4.

Click the

Save

button to make the entry take effect.

Other configurations for the entries:

Click the

Delete

button to delete the entry.

Click the

Enable All

button to enable all the entries.

Click the

Disable All

button to disable all the entries.

Click the

Delete All

button to delete all the entries.

Click the

view the information in the next screen.

4.14.2 System Routing Table

Choose menu “

Advanced Routing

→

System Routing Table

”, and then you can view the

System Routing Table in the next screen (shown in Figure 4-81). System routing table views all of

the valid route entries in use. The Destination IP address, Subnet Mask, Gateway, and Interface

will be displayed for each entry.

Figure 4-81

System Routing Table



Destination Network

- The Destination Network is the address of the network or host to

which the static route is assigned.



Subnet Mask

- The Subnet Mask determines which portion of an IP address is the network

portion, and which portion is the host portion.



Gateway

- This is the IP address of the gateway device that allows for contact between the

router and the network or host.

-83-

Page 94 / 122

TL-WR1043ND

300Mbps Wireless N Gigabit Router



Interface

- This interface tells you either the Destination IP Address is on the

LAN & WLAN

(internal wired and wireless networks), or on the

WAN

(Internet).

4.15 Bandwidth Control

Figure 4-82 Bandwidth Control

There are two submenus under the Bandwidth Control menu as shown in Figure 4-82:

Control

Settings

and

Rules List

. Click any of them, and you will be able to configure the corresponding

function. The detailed explanations for each submenu are provided below.

4.15.1 Control Settings

Choose menu “

Bandwidth Control

→

Control Settings

”, and then you can configure the

Egress Bandwidth and Ingress Bandwidth in the next screen. Their values you configure should

be less than 100000Kbps. For optimal control of the bandwidth, please select the right Line Type

and ask your ISP for the total bandwidth of the egress and ingress.

Figure 4-83 Bandwidth Control Settings



Enable Bandwidth Control -

Check this box so that the Bandwidth Control settings can take

effect.



Line Type

-

Select the right type for you network connection. If you don’t know how to choose,

please ask your ISP for the information.



Egress Bandwidth

- The upload speed through the Internet port

.



Ingress Bandwidth -

The download speed through the Internet port.

4.15.2 Rules List

Choose menu “

Bandwidth Control

→

Rules List

”, and then you can view and configure the

Bandwidth Control rules in the screen below.

-84-

Page 95 / 122

TL-WR1043ND

300Mbps Wireless N Gigabit Router

Figure 4-84 Bandwidth Control Rules List



Description

-

This is the information about the rules such as address range.



Egress bandwidth -

This field displays the max and mix upload bandwidth through the

Internet port, the default is 0.



Ingress bandwidth -

This field displays the max and mix download bandwidth through the

Internet port, the default is 0.



Enable -

This displays the status of the rule.



Modify -

Click

Modify

to edit the rule. Click

Delete

to delete the rule.

To add/modify a Bandwidth Control rule, follow the steps below.

1.

Click

Add New…

shown in Figure 4-84, you will see a new screen shown in Figure 4-85.

2.

Enter the information like the screen shown below.

Figure 4-85 Bandwidth Control Rule Settings

3.

Click the

Save

button.

-85-

Rate

Popular TP-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share