TL-WR1043ND

Wireless N Gigabit Router

-17-

Figure 4-1

Router Status

4.3

Quick Setup

Please refer to

Section 3.2: "Quick Installation Guide."

4.4

QSS

This section will guide you to add a new wireless device to an existing network quickly by

QSS

(Quick Secure Setup)

function.

TL-WR1043ND

Wireless N Gigabit Router

-18-

a).

Choose menu “

QSS

”, and you will see the next screen (shown in

Figure 4-2

).

Figure 4-2

QSS

¾

QSS Status -

Enable or disable the QSS function here.

¾

Current PIN -

The current value of the Router's PIN displayed here. The default PIN of the

Router can be found in the label or User Guide.

¾

Restore PIN -

Restore the PIN of the Router to its default.

¾

Gen New PIN -

Click this button, and then you can get a new random value for the Router's

PIN. You can ensure the network security by generating a new PIN.

¾

Add device -

You can add the new device to the existing network manually by clicking this

button.

b).

To add a new device:

If the wireless adapter supports QSS (Quick Secure Setup) or

（

Wi-Fi Protected Setup), you can

establish a wireless connection between wireless adapter and Router using either Push Button

Configuration (PBC) method or PIN method.

)

Note:

To build a successful connection by QSS, you should also do the corresponding configuration of

the new device for QSS function meanwhile.

For the configuration of the new device, here takes the Wireless Adapter of our company for

example.

I.

By PBC

If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration (PBC)

method, you can add it to the network by PBC with the following two methods.

Method One:

Step 1.

Press the QSS button on the front panel of the Router.

TL-WR1043ND

Wireless N Gigabit Router

-19-

Step 2.

Press and hold the QSS button of the adapter directly for 2 or 3 seconds.

Step 3. Wait for a while until the next screen appears. Click

Finish

to complete the QSS

configuration.

The QSS Configuration Screen of Wireless Adapter

Method Two:

Step 1.

Press the QSS button on the front panel of the Router.

TL-WR1043ND

Wireless N Gigabit Router

-20-

Step 2.

For the configuration of the wireless adapter, please choose

Push the button on my

access point

in the configuration utility of the QSS as below, and click

Next

.

The QSS Configuration Screen of Wireless Adapter

Step 3. Wait for a while until the next screen appears. Click

Finish

to complete the QSS

configuration.

The QSS Configuration Screen of Wireless Adapter

TL-WR1043ND

Wireless N Gigabit Router

-21-

Method Three:

Step 1.

Keep the default QSS Status as

Enabled

and click the

Add device

button in Figure 4-2,

then the following screen will appear.

Figure 4-3

Add A New Device

Step 2. Choose

Press the button of the new device

in two minutes and click

Connect

.

Step 3.

For the configuration of the wireless adapter, please choose

Push the button on my

access point

in the configuration utility of the QSS as below, and click

Next

.

The QSS Configuration Screen of Wireless Adapter