1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TL-WR1043N
    5. /
  5. 13
Page 61 / 124 Scroll up to view Page 56 - 60
TL-WR1043ND
Wireless N Gigabit Router
-52-
private LAN can access FTP Server via
Public Address
while internet users can access
FTP Server via
Internet Address
.
To set up your FTP Server, please follow the instructions below:
1.
Plug an external USB hard disk drive or USB flash drive into this Router, and then the screen
will appear as shown in Figure 4-34.
Figure 4-34
FTP Server Configuration
2.
Click the
Enable/Disable
box to enable/disable internet access to FTP from WAN port.
3.
Change the
Service Port
to specify a port for FTP Server to use. (The default is 21, do not
change unless necessary.)
4.
Click
Add New Folder
to add new folders for the FTP Server. The screen will show as Figure
4-35.
Figure 4-35
Add or Modify Share Folder
Page 62 / 124
TL-WR1043ND
Wireless N Gigabit Router
-53-
¾
Display Name
- You can enter a display name for the share folder.
¾
Share entire partition
- You can select this option and then the folders contained in
this partition will all be shared.
¾
Select
- You can select this option to share the specified folder.
¾
upper
- You can click the upper button to go into the upper folder.
¾
Folder
- Name of folders that is in current path.
¾
Save
- You can click the
Save
button to save your settings and page will be redirected
to the FTP server configuration page.
¾
Back
- You can click the
Back
button to discard the settings and just go to the FTP
Server configuration page.
To add a new share folder for your FTP Server, please follow the instructions below:
1) Select the
Share entire partition
or a specific folder option.
2)
Enter display name of the share folder in
Display Name
edit box.
3) Click the
Save
button to save the configuration and the screen will appear as shown in
Figure 4-36.
Figure 4-36
FTP Server Configuration
5.
Click the
Start
button to start the FTP Server.
)
Note:
1.
The max share folders number is 10. If you want to share a new folder when the number has
reached 10, you can delete a share folder and then add a new one.
2.
The change of the FTP settings will take effect after restarting the FTP Server.
3.
Currently, the maximum number of clients that FTP Server supports is two. Therefore, if you
want to log in, make sure that less than two clients have logged in.
Page 63 / 124
TL-WR1043ND
Wireless N Gigabit Router
-54-
4.8.3
Media Server
Choose menu “
USB Settings
→
Media Server
”, and then you can configure Media Server on this
page as shown in Figure 4-37.
Figure 4-37
Media Server Setting
¾
Server Name
– The name of this Media Server.
¾
Server Status
- Indicates the Media Server’s current status, started or stopped. You can
click the
Start
button to start the Media Server and click the
Stop
button to stop it.
¾
Name
- The display name of this folder.
¾
File System
- The file system type on the partition can be FAT32 or NTFS.
¾
Folder
- The real full path of the specified folder.
¾
Delete
- You can delete the share folder by click
Delete
.
To set up your media server, please follow the instructions below:
1.
Plug an external USB hard disk drive or USB flash drive into this Router, and then the screen
will appear as shown in Figure 4-38.
Figure 4-38
Media Server Setting
2.
Click the
Start
button to start the media server, and then the screen will appear as shown in
Figure 4-39.
Page 64 / 124
TL-WR1043ND
Wireless N Gigabit Router
-55-
Figure 4-39
Media Server Setting
3.
Click the
Add share folder
button to specify a folder as the search path of media server. The
screen will then appear as shown in Figure 4-40.
Figure 4-40
Add New Folder
¾
Display Name
- You can enter a display name for the share folder.
¾
Share entire partition
- You can select this option and then the folders contained in
this partition will all be shared.
¾
Folder Location
- Displays the location of this folder.
¾
Select
- You can select this option to share the specified folder.
¾
Folder
- Name of folders that is in current path.
¾
upper
- You can click the
upper
button to get into the upper folder.
Page 65 / 124
TL-WR1043ND
Wireless N Gigabit Router
-56-
¾
Save
- You can click the
Save
button to save your settings and the page will be
redirected to the media server configuration page.
¾
Back
- You can click the
Back
button to discard the settings and just go to the media
server configuration page.
To add a new share folder for your media server, please follow the instructions below:
1)
Select the
Share entire partition
or a specified folder option.
2)
Enter the display name of the share folder in
Display Name
edit box.
3)
Click the
Save
button to save the configuration and the page will be redirected to the
media server configuration page as shown in Figure 4-41.
Figure 4-41
Media Server Setting
4.
Click the
Scan All button
to scan all the share folders immediately. You can also select the
Auto-scan
, at same time, select an auto scan interval time by drop-down list. In this case,
the media server will auto scan the share folders.
)
Note:
The max share folders number is 6. If you want share a new folder when the numbers has been
reached to be 6, you can delete a share folder and then add a new one.
4.8.4
Print Server
Choose menu “
USB Settings
→
Print Server
”, you can configure print server on this page as
shown below.
Figure 4-42 Pint Server Setting
There are two states of the print server, described as follows:

Rate

3.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top