1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TL-WA7210N
    5. /
  5. 9
Page 41 / 150 Scroll up to view Page 36 - 40
TL-WA7210N
2.4GHz 150Mbps Outdoor Wireless Access Point User Guide
31
Figure 3-29 AP List
You will then return to the Wireless page as shown in Figure 3-28. The security mode will be
selected automatically, please confirm it and enter the same password as is on your router or
access point, then click
Next
.
3.
The Network Setting page will appear then. It is recommended that you keep the default
settings on this page. Click
Next
.
Figure 3-30 Network
4.
When you finish the wireless setting in Figure 3-30 and click
Next
, then Figure 3-31 will
appear, where you can click
Finish
button to complete the
Quick Setup
.
Page 42 / 150
TL-WA7210N
2.4GHz 150Mbps Outdoor Wireless Access Point User Guide
32
Figure 3-31 Finish page
3.2.6 Bridge with AP
When you choose
Bridge with AP
on
Operation Mode
page in Figure 3-7, take the following
steps:
1.
Click
Next
in Figure 3-7, and then
Wireless
page will appear as shown in Figure 3-32. Click
Survey
button to scan the wireless networks.
Figure 3-32 Wireless Bridge Setting
Wireless Name of Remote AP
- The SSID of the AP your Device is going to connect to as a
client. You can also use the survey function to select the SSID to join.
Page 43 / 150
TL-WA7210N
2.4GHz 150Mbps Outdoor Wireless Access Point User Guide
33
Mac Address of Remote AP:
- The Mac Address of the AP your Device is going to connect
to as a client. You can also use the survey function to select the BSSID to join.
Survey
- Click this button, you can search the APs.
Region
- Select your region from the pull-down list. This field specifies the region where the
wireless function of the Router can be used. It may be illegal to use the wireless function of
the Router in a region other than one of those specified in this filed. If your country or region is
not listed, please contact your local government agency for assistance.
When you select your local region from the pull-down list, the Note Dialog of
TERMS OF USE
will pop up. Select
I agree to these terms of use
, and click
Accept
to continue.
Note Dialog
Note:
Ensure you select a correct country to comply with local laws. Incorrect settings may cause
interference.
Transmission Power
- The available options of transmission power are determined by the
region selected.
Channel
- This field determines which operating frequency will be used. It is not necessary to
change the wireless channel unless you notice interference problems with another nearby
access point.
Wireless Security Mode
- This option should be chosen according to the AP's security
configuration. It is recommended that the security type is the same as your AP's security type.
WPA/WPA2-PSK
- Select WPA based on pre-shared passphrase.
WEP
- Select WEP based on none pre-shared passphrase.
No
Security
- The wireless security function is disabled. The wireless stations will
be able to connect the Device without encryption.
Auth Type
- This option should be chosen if the Security Mode is WEP. It indicates the
authorization type of the Root AP.
Key Format
- This option should be chosen if the Security Mode is WEP. It indicates the
format of the WEP key.
WEP Index
- This option should be chosen if the Security Mode is WEP. It indicates the index
of the WEP key.
Wireless Password
- If the AP your Device is going to connect needs password, you need to
fill the password in this blank.
Page 44 / 150
TL-WA7210N
2.4GHz 150Mbps Outdoor Wireless Access Point User Guide
34
Note:
The operating distance or range of your wireless connection varies significantly based on the
physical placement of the Device. For best results, place your Device
Near the center of the area in which your wireless stations will operate.
In an elevated location such as a high shelf.
Away from the potential sources of interference, such as PCs, microwaves, and cordless
phones.
With the Antenna in the upright position.
Away from large metal surfaces.
Failure to follow these guidelines can result in significant performance degradation or inability
to wirelessly connect to the Device.
2.
The AP List page will appear shown as Figure 3-33. Find the BSSID (the same as the MAC
address) of the remote AP that you want to bridge, and then click
Connect
on the right side
of the line.
Figure 3-33 AP List
You will then return to the Wireless page as shown in Figure 3-32. The security mode will be
selected automatically, please confirm it and enter the same password as is on your router or
access point, then click
Next
.
3.
Create a name for the Local Wireless Network. The security settings for the local network will
be set the same as your root AP by default. Click
Next
.
Figure 3-34 Local Wireless AP Setting
4.
The Network Setting page will appear then. It is recommended that you keep the default
settings on this page. Click
Next
.
Page 45 / 150
TL-WA7210N
2.4GHz 150Mbps Outdoor Wireless Access Point User Guide
35
Figure 3-35 Network
5.
When you finish the wireless setting in Figure 3-35 and click
Next
, then Figure 3-36 will
appear, where you can click
Finish
button to complete the
Quick Setup
.
Figure 3-36 Finish page
3.2.7 Client
When you choose
Client
on
Operation Mode
page in Figure 3-7, take the following steps:

Rate

3.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top