TL-R480T

SMB Broadband Router User Guide

50

4.9.1

QoS Settings

Choose menu “

QoS

→

QoS Settings

”, you can configure the Upload Bandwidth and Download

Bandwidth in the next screen, their value you configure should be less than 1000000Kbps.

Figure 4-45

4.9.2

QoS Rules List

Choose menu “

QoS

→

QoS Rules List

”, you can view and configure the QoS rules in the screen

below.

Figure 4-46

¾

Description

-

This is the information about the rules such as address range.

¾

Mode -

Mode can be separated into “independent bandwidth” and “share bandwidth”.

Independent bandwidth means every port has its own upload and download bandwidth,

share bandwidth means address or port share upload and download bandwidth.

¾

Egress bandwidth -

This field displays the max and mix upload bandwidth through the WAN

port, the default is 0.

¾

Ingress bandwidth -

This field displays the max and mix download bandwidth through the

WAN port, the default is 0.

¾

Enable -

This displays the status of the rule.

¾

Modify -

Click “

Modify

” to edit the rule, click “

Delete

” to delete the rule.

To add/modify a QoS rule:

Step 1:

Click

Add New…

/

Modify

shown in Figure 4-46, you will see a new screen shown in

Figure 4-47.

Step 2:

Enter the information like the screen shown below.

TL-R480T

SMB Broadband Router User Guide

51

Figure 4-47

Step 3:

Click the

Save

button.

4.10 IP & MAC Binding

Choose menu “

IP & MAC Binding

”, you can see the submenus under the main menu:

Binding

Setting, ARP List

.

Figure 4-48

Click any of them, and you will be able to configure the corresponding function. The detailed

explanations for each submenu are provided below.

4.10.1 Binding Setting

Choose menu “

IP & MAC Binding

→

Binding Setting

”, you can view and add IP & MAC binding

entries in the next screen (shown in Figure 4-49).

TL-R480T

SMB Broadband Router User Guide

52

Figure 4-49

¾

MAC Address

-

This field displays the MAC address of the controlled computer in the LAN.

¾

IP Address -

This field displays the assigned IP address of the controlled computer in the

LAN.

¾

Bind

-

Select Whether enable the arp binding or not. Only bind the MAC address and IP

address can the function take effect.

To add/modify an IP & MAC binding entry:

Step 1:

Click

Add New…

/

Modify

shown in Figure 4-49, you will see a new screen shown in

Figure 4-50.

Step 2:

Enter the MAC Address and IP Address in the corresponding field.

Figure 4-50

Step 3:

Select

Bind

the MAC and IP address, then click

Save

button to save the configuration.

To find a specific IP & MAC binding entry:

Step 1:

Click

Find

shown in Figure 4-49, you will see a new screen shown in Figure 4-51.

Step 2:

Enter the specific MAC Address or IP Address in the corresponding field.

TL-R480T

SMB Broadband Router User Guide

53

Figure 4-51

Step 3:

Click

Find

button, then you will see the entry with the specific MAC address or IP

address.

Step 4:

Click

Back

to return the previous screen.

)

Note:

You can click “to page” to edit the entry in the corresponding screen.

Other configurations for the entries as shown in Figure 4-49:

Click the

Delete

button to delete the entry.

Click the

Enable All

button to enable all the entries.

Click the

Delete All

button to delete all the entries.

Click the

Previous

button to view the information in the previous screen,

click the

Next

button to

view the information in the next screen.

4.10.2 ARP List

Choose menu “

IP & MAC Binding

→

ARP List

”, you can view the ARP list in the next screen

(shown in Figure 4-52). This screen displays the ARP list, it shows all the existing IP & MAC

Binding entries.

To manage the computer, you could observe the computers in the LAN by checking the

relationship of MAC address and IP address on the ARP list, and you could configure the items on

the ARP list also.

Figure 4-52

TL-R480T

SMB Broadband Router User Guide

54

Click

Load

to load the specific item to the IP & MAC Binding list (shown in Figure 4-49).

Click

Delete

to load the specific item to the IP & MAC Binding list.

Click the

Bind All

button to bind all the current items, available after enable.

Click the

Load All

button to load all items to the IP & MAC Binding list (shown in Figure 4-49).

Click the

Refresh

button to refresh all items.

)

Note:

An item could not be loaded to the IP & MAC Binding list if the IP address of the item has been

loaded before.

4.11 Dynamic DNS

Choose menu “

Dynamic DNS

”, you can configure Dynamic DNS function.

The router offers a Dynamic Domain Name System (

DDNS

) feature. DDNS lets you assign a fixed

host and domain name to a dynamic Internet IP address. It is useful when you are hosting your

own website, FTP server, or other server behind the router. Before using this feature, you need to

sign up for DDNS service providers such as

www.dyndns.org

or

www.oray.net

or

www.comexe.cn

.

The Dynamic DNS client service provider will give you a password or key.

4.11.1 Dyndns DDNS

If your dynamic DNS Service Provider

is

www.dyndns.org

, you can configure in the next screen

(shown in Figure 4-53).

Figure 4-53

¾

Connection Status -

The status of the DDNS service is displayed here.

To set up for Dyndns DDNS, follow these instructions: