TP-Link TL-R470T Plus Router Manual PDF (Setup & Configuration Guide)

Page 106 / 118 Scroll up to view Page 101 - 105

-102-

Interface:

Displays the interface.

IP Fragment Rx:

Displays the amount of IP Fragments received by WAN port.

Abnormal IP Packets Rx:

Displays the rate for transmitting data frames.

4.8.3.2

IP Traffic Statistics

IP Traffic Statistics screen displays the detailed traffic information of each PC on LAN.

Choose the menu

Maintenance

→

Statistics

→

IP Traffic Statistics

to load the following page.

Figure 4-64 IP Traffic Statistics

The following items are displayed on this screen:

¾

General

Enable IP Traffic

Statistics:

Allows you to enable or disable IP Traffic Statistics.

Enable Auto-refresh:

Allows you to enable/disable refreshing the IP Traffic Statistics

automatically. The default refresh interval is 5 seconds.

¾

Traffic Statistics

Direction:

Select the direction in the drop-down list to get the Flow Statistics of

the specified direction.

¾

IP Traffic Statistics

This table displays the detailed traffic information of corresponding PCs.

Sorted by:

Select the rule for displaying the traffic information.

4.8.4 Diagnostics

4.8.4.1

Diagnostics

This Router provides Ping test and Tracert test functions for network diagnose.

Page 107 / 118

-103-

Choose the menu

Maintenance

→

Diagnostics

→

Diagnostics

to load the following page.

Figure 4-65 Diagnostics

The following items are displayed on this screen:

¾

Ping

Destination IP/Domain:

Enter destination IP address or Domain name here. Then select a

port for testing, if you select “Auto”, the Router will select the

interface of destination automatically. After clicking <Start> button,

the Router will send Ping packets to test the network connectivity

and reachability of the host and the results will be displayed in the

box below.

¾

Tracert

Page 108 / 118

-104-

Destination IP/Domain:

Enter destination IP address or Domain name here. Then select a

port for testing, if Auto is selected, the Router will select the interface

of destination automatically. After clicking the <Start> button, the

Router will send Tracert packets to test the connectivity of the

gateways during the journey from the source to destination of the

test data and the results will be displayed in the box below.

4.8.4.2

Online Detection

On this page, you can detect the WAN port is online or not.

Choose the menu

Maintenance

→

Diagnostics

→

Online Detection

to load the following page.

Figure 4-66 Online Detection

The following items are displayed on this screen:

¾

General

Port:

Select the port to be detected.

Detecting:

Activate or inactivate Online Detection function. When Online Detection is

active, WAN status will depend on the result of both PING and DNS

Lookup. When Online Detection is inactive, WAN status will be detected

according to physical connection status and dial-up status.

Mode:

Detect automatically or Manually. In Auto mode, gateway will be selected

as destination for PING detection, DNS server of WAN port will be

selected as destination for DNS Lookup. In Manual Mode, you can

configure the destination for PING and DNS Lookup manually.

Ping:

Enter the destination IP for Ping in Manual mode. 0.0.0.0 means PING

detection is disabled.

DNS Lookup:

Enter the IP address of DNS server in Manual mode. 0.0.0.0 means DNS

Lookup is disabled.

¾

List of WAN status

Page 109 / 118

-105-

Port:

Displays the detected WAN port.

Detection:

Displays whether the Online Detection is enabled.

WAN Status:

Display the detecting results.

4.8.5

Time

System Time is the time displayed while the Router is running. On this page you can configure the

system time and the settings here will be used for other time-based functions like Access Rule, PPPoE

and Logs.

Choose the menu

Maintenance

→

Time

→

Time

to load the following page.

Figure 4-67 Time

The following items are displayed on this screen:

¾

Current Time

System Time:

Displays the current date and time of the Router.

Time Zone:

Displays the current time zone of the Router.

Status:

Displays the status of time capturing

¾

Config

Get GMT:

When this option is selected, you can configure the time zone and the

IP Address for the NTP Server. The Router will get GMT automatically

if it has connected to a NTP Server.

z

Time Zone: Select your local time.

z

Primary/Secondary NTP Server: Enter the IP Address for the NTP

Server.

Page 110 / 118

-106-

Manual:

With this option selected, you can set the date and time manually.

Synchronize

with

PC’S Clock:

With this option selected, the administrator PC’s clock is utilized.

Note:

●

If Get GMT function cannot be used properly, please add an entry with UDP port of 123 to the

firewall software of the PC.

●

The time will be lost when the Router is restarted. The Router will obtain GMT time automatically

from Internet.

4.8.6

Logs

The Log system of Router can record, classify and manage the system information effectively.

Choose the menu

Maintenance

→

Logs

→

Logs

to load the following page.

Figure 4-68 Logs

¾

List of Logs

List of Logs displays the system log information in log buffer. An entry of log contains the following four

parts:

¾

Config

Enable Auto-refresh:

With this option selected, the page will refresh automatically every 5

seconds.

Severity:

Displays the severity level of the log information. You can select a

severity level to display the log information with the same level.

Send System Logs:

Select Send System Logs and specify the server IP, then the new

added logs will be sent to the specified server.

The Logs of switch are classified into the following eight levels.

Rate

Popular TP-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share