TP-Link TL-MR3420 Router Manual PDF (Setup & Configuration Guide)

Page 91 / 121 Scroll up to view Page 86 - 90

TL-MR3420

3G/3.75G Wireless N Router

-84-

Click the

Enable All

button to enable all the entries.

Click the

Disable All

button to disable all the entries.

Click the

Delete All

button to delete all the entries.

Click the

view the information in the next screen.

4.13

Bandwidth Control

Figure 4-64

There are two submenus under the Bandwidth Control menu as shown in Figure 4-57. Click any

of them, and you will be able to configure the corresponding function. The detailed explanations

for each submenu are provided below.

4.13.1 Control Settings

Choose menu “

Bandwidth Control

→

Control Settings

”, you can configure the Egress

Bandwidth and Ingress Bandwidth in the next screen. Their values you configure should be less

than 100000Kbps. For optimal control of the bandwidth, please select the right Line Type and ask

your ISP for the total bandwidth of the egress and ingress.

Figure 4-65 Bandwidth Control Settings

¾

Enable Bandwidth Control -

Check this box so that the Bandwidth Control settings can take

effect.

¾

Line Type

-

Select the right type for you network connection. If you don’t know how to choose,

please ask your ISP for the information.

¾

Egress Bandwidth

- The upload speed through the WAN port

.

¾

Ingress Bandwidth -

The download speed through the WAN port.

Page 92 / 121

TL-MR3420

3G/3.75G Wireless N Router

-85-

4.13.2 Rules List

Choose menu “

Bandwidth Control

→

Rules List

”, you can view and configure the Bandwidth

Control rules in the screen below.

Figure 4-66 Bandwidth Control Rules List

¾

Description

-

This is the information about the rules such as address range.

¾

Egress bandwidth -

This field displays the max and mix upload bandwidth through the WAN

port, the default is 0.

¾

Ingress bandwidth -

This field displays the max and mix download bandwidth through the

WAN port, the default is 0.

¾

Enable -

This displays the status of the rule.

¾

Modify -

Click

Modify

to edit the rule. Click

Delete

to delete the rule.

To add/modify a Bandwidth Control rule, follow the steps below.

Step 1:

Click

Add New…

shown in Figure 4-66, you will see a new screen shown in Figure 4-67.

Step 2:

Enter the information like the screen shown below.

Page 93 / 121

TL-MR3420

3G/3.75G Wireless N Router

-86-

Figure 4-67 Bandwidth Control Rule Settings

Step 3:

Click the

Save

button.

4.14

IP & MAC Binding Setting

Figure 4-68 the IP & MAC Binding menu

There are two submenus under the IP &MAC Binding menu (shown in Figure 4-68):

Binding

Setting

and

ARP List

. Click any of them, and you will be able to scan or configure the

corresponding function. The detailed explanations for each submenu are provided below.

4.14.1 Binding Setting

This page displays the

IP & MAC Binding Setting

table; you can operate it in accord with your

desire. (shown in

Figure 4-69).

Figure 4-69 Binding Setting

¾

MAC Address

-

The MAC address of the controlled computer in the LAN.

¾

IP Address -

The assigned IP address of the controlled computer in the LAN.

¾

Bind

-

Check this option to enable ARP binding for a specific device.

¾

Modify

-

To modify or delete an existing entry.

When you want to add or modify an IP & MAC Binding entry, you can click the

Add New

button

or

Modify

button, and then you will go to the next page. This page is used for adding or

modifying an IP & MAC Binding entry (shown in Figure 4-70).

Page 94 / 121

TL-MR3420

3G/3.75G Wireless N Router

-87-

Figure 4-70

IP & MAC Binding Setting (Add & Modify)

To add IP & MAC Binding entries, follow the steps below.

1.

Click the

Add New...

button as shown in Figure 4-69.

2.

Enter the MAC Address and IP Address.

3.

Select the Bind checkbox.

4.

Click the

Save

button to save it.

To modify or delete an existing entry, follow the steps below.

1.

Find the desired entry in the table.

2.

Click

Modify

or

Delete

as desired on the

Modify

column.

To find an existing entry, follow the steps below.

1.

Click the

Find

button as shown in Figure 4-69.

2.

Enter the MAC Address or IP Address.

3.

Click the

Find

button in the page as shown in Figure 4-71.

Figure 4-71

Find IP & MAC Binding Entry

Click the

Enable All

button to make all entries enabled.

Click the

Delete All

button to delete all entries.

Page 95 / 121

TL-MR3420

3G/3.75G Wireless N Router

-88-

4.14.2 ARP List

To manage the computer, you could observe the computers in the LAN by checking the

relationship of MAC address and IP address on the ARP list, and you could configure the items on

the ARP list also. This page displays the ARP List; it shows all the existing IP & MAC Binding

entries (shown in Figure 4-72).

Figure 4-72

ARP List

¾

MAC Address

-

The MAC address of the controlled computer in the LAN.

¾

IP Address

-

The assigned IP address of the controlled computer in the LAN.

¾

Status

-

Indicates whether or not the MAC and IP addresses are bound.

¾

Configure

-

Load or delete an item.

z

Load

-

Load the item to the IP & MAC Binding list.

z

Delete

-

Delete the item.

Click the

Bind All

button to bind all the current items, available after enable.

Click the

Load All

button to load all items to the IP & MAC Binding list.

Click the

Refresh

button to refresh all items.

)

Note:

An item could not be loaded to the IP & MAC Binding list if the IP address of the item has been

loaded before. Error warning will prompt as well. Likewise, "Load All" only loads the items without

interference to the IP & MAC Binding list.

4.15

Dynamic DNS

Choose menu “

Dynamic DNS

”, and you can configure the Dynamic DNS function.

The Router offers the

DDNS

(Dynamic Domain Name System) feature, which allows the hosting

Rate

Popular TP-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share