1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TL-MR3240
    5. /
  5. 22
Page 106 / 122 Scroll up to view Page 101 - 105
TL-MR3220
3G/3.75G Wireless Lite N Router
-99-
Figure 4-84
Password
It is strongly recommended that you should change the factory default user name and password
of the Router, because all users who try to access the Router's Web-based utility or Quick
Setup will be prompted for the Router's default user name and password.
)
Note:
The new user name and password must not exceed 14 characters in length and not include any
spaces. Enter the new Password twice to confirm.
Click the
Save
button when finished.
Click the
Clear All
button to clear all.
4.16.8 System Log
Choose menu “
System Tools
→
System Log
”, you can view the logs of the Router.
Figure 4-85
System Log
¾
Auto Mail Feature -
Indicates whether auto mail feature is enabled or not.
¾
Mail Settings -
Set the receiving and sending mailbox address, server address, validation
information as well as the timetable for Auto Mail Feature, as shown in Figure 4-86.
Downloaded from
www.Manualslib.com
manuals search engine
Page 107 / 122
TL-MR3220
3G/3.75G Wireless Lite N Router
-100-
Figure 4-86
Mail Account Settings
z
From -
Your mail box address. The Router would connect it to send logs.
z
To
-
Recipient’s address. The destination mailbox where the logs would be
received.
z
SMTP Server -
Your smtp server. It corresponds with the mailbox filled in the From
field. You can log on the relevant website for Help if you are not clear with the
address.
z
Authentication
-
Most SMTP Server requires Authentication. It is required by most
mailboxes that need User Name and Password to log in.
)
Note:
Only when you select
Authentication
, do you have to enter the User Name and
Password in the following fields.
z
User Name -
Your mail account name filled in the From field. The part behind @ is
excluded.
z
Password -
Your mail account password.
z
Confirm The Password -
Enter the password again to confirm.
z
Enable Auto Mail Feature -
Select it to mail logs automatically. You could mail the
current logs either at a specified time everyday or by intervals, but only one could be
the current effective rule. Enter the desired time or intervals in the corresponding
field as shown in Figure 4-86
Click
Save
to keep your settings.
Click
Back
to return to the previous page.
¾
Log Type -
By selecting the log type, only logs of this type will be shown.
Downloaded from
www.Manualslib.com
manuals search engine
Page 108 / 122
TL-MR3220
3G/3.75G Wireless Lite N Router
-101-
¾
Log Level -
By selecting the log level, only logs of this level will be shown.
¾
Refresh -
Refresh the page to show the latest log list.
¾
Save Log -
Click to save all the logs in a txt file.
¾
Mail Log -
Click to send an email of current logs manually according to the address and
validation information set in Mail Settings.
¾
Clear Log -
All the logs will be deleted from the Router permanently, not just from the
page.
Click the
Next
button to go to the next page, or click the
Previous
button return to the previous
page.
4.16.9 Statistics
Choose menu “
System Tools
→
Statistics
”, you can view the statistics of the Router,
including total traffic and current traffic of the last Packets Statistic Interval.
Figure 4-87
Statistics
¾
Current Statistics Status -
Enable or Disable. The default value is disabled. To enable,
click the
Enable
button. If disabled, the function of DoS protection in Security settings will
disabled.
¾
Packets Statistics Interval
（
5-60
）
-
The default value is 10. Select a value between 5
and 60 seconds in the pull-down list. The Packets Statistic interval indicates the time
section of the packets statistic.
¾
Sorted Rules -
Choose how displayed statistics are sorted.
Select the
Auto-refresh
checkbox to refresh automatically.
Click the
Refresh
button to refresh immediately.
Downloaded from
www.Manualslib.com
manuals search engine
Page 109 / 122
TL-MR3220
3G/3.75G Wireless Lite N Router
-102-
Click
Reset
All
to reset the values of all the entries to zero.
Click
Delete
All
to delete all entries in the table.
Statistics Table:
IP/MAC Address
The IP and MAC address are displayed with related statistics.
Packets
The total number of packets received and transmitted by the
Router.
Total
Bytes
The total number of bytes received and transmitted by the
Router.
Packets
The total number of packets received and transmitted in the last
Packets Statistic interval seconds.
Bytes
The total number of bytes received and transmitted in the last
Packets Statistic interval seconds.
ICMP
Tx
The number of the ICMP packets transmitted to WAN per second
at the specified Packets Statistics interval. It is shown like
“current transmitting rate / Max transmitting rate”.
UDP Tx
The number of UDP packets transmitted to the WAN per second
at the specified Packets Statistics interval. It is shown like
“current transmitting rate / Max transmitting rate”.
Current
TCP
SYN Tx
The number of TCP SYN packets transmitted to the WAN per
second at the specified Packets Statistics interval. It is shown like
“current transmitting rate / Max transmitting rate”.
Reset
Reset the value of he entry to zero.
Modify
Delete
Delete the existing entry in the table.
There would be 5 entries on each page. Click
Previous
to return to the previous page and
Next
to the next page.
Downloaded from
www.Manualslib.com
manuals search engine
Page 110 / 122
TL-MR3220
3G/3.75G Wireless Lite N Router
-103-
Appendix A: FAQ
1.
How do I configure the Router to access Internet by ADSL users?
1)
First, configure the ADSL Modem configured in RFC1483 bridge model.
2)
Connect the Ethernet cable from your ADSL Modem to the WAN port on the Router.
The telephone cord plugs into the Line port of the ADSL Modem.
3)
Login to the Router, click the “Network” menu on the left of your browser, and click
"WAN" submenu. On the WAN page, select “PPPoE” for WAN Connection Type. Type
user name in the “User Name” field and password in the “Password” field, finish by
clicking “Connect”.
Figure A-1
PPPoE Connection Type
4)
If your ADSL lease is in “pay-according-time” mode, select “Connect on Demand” or
“Connect Manually” for Internet connection mode. Type an appropriate number for
“Max Idle Time” to avoid wasting paid time. Otherwise, you can select
“Auto-connecting” for Internet connection mode.
Figure A-2
PPPoE Connection Mode
)
Note:
1)
Sometimes the connection cannot be disconnected although you specify a time to Max
Idle Time, since some applications is visiting the Internet continually in the
background.
2)
If you are a Cable user, please configure the Router following the above steps.
2.
How do I configure the Router to access Internet by Ethernet users?
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top