1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TL-MR3240
    5. /
  5. 17
Page 81 / 122 Scroll up to view Page 76 - 80
TL-MR3220
3G/3.75G Wireless Lite N Router
-74-
z
Select “Schedule_1” you create just now from the
Effective Time
drop-down list.
z
In
Status
field, select Enable.
4. Click
Save
to complete the settings.
Then you will go back to the Parental Control Settings page and see the following list, as
shown in Figure 4-50.
Figure 4-50
Parental Control Settings
4.11 Access Control
Figure 4-51 Access Control
There are four submenus under the Access Control menu as shown in Figure 4-51:
Rule
,
Host
,
Target
and
Schedule
. Click any of them, and you will be able to configure the corresponding
function.
4.11.1 Rule
Choose menu “
Access Control
→
Rule
”, you can view and set Access Control rules in the
screen as shown in Figure 4-52.
Downloaded from
www.Manualslib.com
manuals search engine
Page 82 / 122
TL-MR3220
3G/3.75G Wireless Lite N Router
-75-
Figure 4-52
Access Control Rule Management
¾
Enable Internet Access Control -
Select the check box to enable the Internet Access
Control function, so the Default Filter Policy can take effect.
¾
Rule Name -
Here displays the name of the rule and this name is unique.
¾
Host -
Here displays the host selected in the corresponding rule.
¾
Target -
Here displays the target selected in the corresponding rule.
¾
Schedule -
Here displays the schedule selected in the corresponding rule.
¾
Action -
Here displays the action the Router takes to deal with the packets. It could be
Allow
or
Deny
.
Allow
means that the Router permits the packets to go through the Router.
Deny
means that the Router rejects the packets to go through the Router.
¾
Status -
This field displays the status of the rule.
Enabled
means the rule will take effect,
Disabled
means the rule will not take effect.
¾
Modify -
Here you can edit or delete an existing rule.
To add a new rule, please follow the steps below.
1. Click the
Add New…
button and the next screen will pop-up as shown in Figure 4-53.
2.
Give a name (e.g. Rule_1) for the rule in the
Rule Name
field.
3.
Select a host from the
Host
drop-down list or choose “
Click Here To Add New Host List
”.
4.
Select a target from the
Target
drop-sown list or choose “
Click Here To Add New Target
List
”.
Downloaded from
www.Manualslib.com
manuals search engine
Page 83 / 122
TL-MR3220
3G/3.75G Wireless Lite N Router
-76-
5. Select a schedule from the
Schedule
drop-down list or choose “
Click Here To Add New
Schedule
”.
6. In the
Action
field, select
Deny
or
Allow
.
7. In the
Status
field, select
Enabled
or
Disabled
to enable or disable your entry.
8.
Click the
Save
button.
Click the
Enable All
button to enable all the rules in the list.
Click the
Disable All
button to disable all the rules in the list.
Click the
Delete All
button to delete all the entries in the table.
You can change the entry’s order as desired. Fore entries are before hind entries. Enter the ID
number in the first box you want to move and another ID number in second box you want to
move to, and then click the
Move
button to change the entry’s order.
Click the
Next
button to go to the next page, or click the
Previous
button return to the previous
page.
Figure 4-53
Add or Modify Internet Access Control Entry
For example
: If you desire to allow the host with MAC address 00-11-22-33-44-AA to access
www.google.com
only from
18:00
to
20:00
on
Saturday and Sunday
, and forbid other hosts
in the LAN to access the Internet, you should follow the settings below:
1. Click “
Access Control
→
Host
” in the left to enter the Host Settings page. Add a new
entry with the Host Description is Host_1 and MAC Address is 00-11-22-33-44-AA.
2. Click “
Access Control
→
Target
” in the left to enter the Target Settings page. Add a new
entry with the Target Description is Target_1 and Domain Name is www.google.com.
3. Click “
Access Control
→
Schedule
” in the left to enter the Schedule Settings page. Add a
new entry with the Schedule Description is Schedule_1, Day is Sat and Sun, Start Time is
1800 and Stop Time is 2000.
Downloaded from
www.Manualslib.com
manuals search engine
Page 84 / 122
TL-MR3220
3G/3.75G Wireless Lite N Router
-77-
4. Click “
Access Control
→
Rule
” in the left to return to the Access Control Rule
Management page. Select “
Enable Internet Access Control
” and choose "Deny the
packets not specified by any access control policy to pass through the Router".
5. Click
Add New...
button to add a new rule as follows:
z
In
Rule Name
field, create a name for the rule. Note that this name should be unique,
for example Rule_1.
z
In
Host
field, select Host_1.
z
In
Target
field, select Target_1.
z
In
Schedule
field, select Schedule_1.
z
In
Action
field, select Allow.
z
In
Status
field, select Enable.
z
Click
Save
to complete the settings.
Then you will go back to the Access Control Rule Management page and see the following list.
4.11.2 Host
Choose menu “
Access Control
→
Host
”, you can view and set a Host list in the screen as
shown in Figure 4-54. The host list is necessary for the Access Control Rule.
Figure 4-54
Host Settings
¾
Host Description -
Here displays the description of the host and this description is unique.
¾
Information -
Here displays the information about the host. It can be IP or MAC.
¾
Modify -
To modify or delete an existing entry.
To add a new entry, please follow the steps below.
1.
Click the
Add New…
button.
2.
In the
Mode
field, select IP Address or MAC Address.
Downloaded from
www.Manualslib.com
manuals search engine
Page 85 / 122
TL-MR3220
3G/3.75G Wireless Lite N Router
-78-
z
If you select IP Address, the screen shown is Figure 4-55.
1) In
Host Description
field, create a unique description for the host (e.g. Host_1).
2) In
LAN IP Address
field, enter the IP address.
z
If you select MAC Address, the screen shown is Figure 4-56.
1) In
Host Description
field, create a unique description for the host (e.g. Host_1).
2) In
MAC Address
field, enter the MAC address.
3.
Click the
Save
button to complete the settings.
Click the
Delete All
button to delete all the entries in the table.
Click the
Next
button to go to the next page, or click the
Previous
button return to the previous
page.
Figure 4-55
Add or Modify a Host Entry
Figure 4-56
Add or Modify a Host Entry
For example
: If you desire to restrict the internet activities of host with MAC address
00-11-22-33-44-AA, you should first follow the settings below:
1. Click
Add New...
button in Figure 4-54 to enter the Add or Modify a Host Entry page.
2. In
Mode
field, select MAC Address from the drop-down list.
3. In
Host Description
field, create a
unique
description for the host (e.g. Host_1).
4. In
MAC Address
field, enter 00-11-22-33-44-AA.
5. Click
Save
to complete the settings.
Then you will go back to the Host Settings page and see the following list.
Downloaded from
www.Manualslib.com
manuals search engine

Rate

4.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top