Page 41 / 258
Scroll up to view Page 36 - 40
TL-MR3020
Portable 3G/4G Wireless N Router
Step 2:
Press and hold the WPS button of the adapter directly for 2 or 3 seconds.
Step 3: Wait for a while until the next screen appears. Click
Finish
to complete the WPS
configuration.
The WPS Configuration Screen of Wireless Adapter
-30-
Page 42 / 258
TL-MR3020
Portable 3G/4G Wireless N Router
Method Two:
Step 1: Press the WPS/RESET button on the front panel of the Router for less than 5 seconds.
Step 2: For the configuration of the wireless adapter, please choose
Push the button on my
access point
in the
configuration utility of the WPS as below, and click
Next
.
The WPS Configuration Screen of Wireless Adapter
Step 3: Wait for a while until the next screen appears. Click
Finish
to complete the WPS
configuration.
-31-
Page 43 / 258
TL-MR3020
Portable 3G/4G Wireless N Router
The WPS Configuration Screen of Wireless Adapter
Method Three:
Step 1.
Keep the default WPS Status as
Enabled
and click the
Add device
button in Figure
4-2, then the following screen will appear.
Figure 4-3
Add A New Device
Step 2. Choose
Press the button of the new device
in two minutes and click
Connect
.
Step 3.
Press and hold the WPS button of the adapter directly for 2 or 3 seconds.
-32-
Page 44 / 258
TL-MR3020
Portable 3G/4G Wireless N Router
Step 4. Wait for a while until the next screen appears. Click
Finish
to complete the WPS
configuration.
The WPS Configuration Screen of Wireless Adapter
II. By PIN
If the new device supports Wi-Fi Protected Setup and the PIN method, you can add it to the
network by PIN with the following two methods.
Method One:
Enter the PIN into my Router
Step 1: Keep the default WPS Status as
Enabled
and click the
Add device
button in
Figure
4-2
, then the following screen will appear.
Step 2: Choose
Enter the new device's PIN
and enter the PIN code of the wireless adapter in
the field behind
PIN
in the above figure. Then click
Connect.
Note:
The PIN code of the adapter is always displayed on the WPS configuration screen
Step 3: For the configuration of the wireless adapter, please choose
Enter a PIN into my
access point or a registrar
in the
configuration utility of the WPS as below, and click
Next.
-33-
Page 45 / 258
TL-MR3020
Portable 3G/4G Wireless N Router
The WPS Configuration Screen of Wireless Adapter
Note:
In this example, the default PIN code of this adapter is 16952898 as the above figure shown.
Method Two:
Enter the PIN from my Router
Step 1: Get the Current PIN code of the Router in
Figure 4-2
(each Router has its unique PIN
code. Here takes the PIN code 12345670 of this Router for example).
Step 2: For the configuration of the wireless adapter, please choose
Enter a PIN from my
access point
in the
configuration utility of the WPS as below, and enter the PIN code
of the Router into the field behind
Access Point PIN
. Then click
Next.
The WPS Configuration Screen of Wireless Adapter
-34-
19216811.live