Page 121 / 258
Scroll up to view Page 116 - 120
TL-MR3020
Portable 3G/4G Wireless N Router
Chapter 5. Router Configuration—WISP Mode
This chapter will show each Web page's key functions and the configuration way on WISP
Mode.
5.1 Login
After your successful login, you will see the main menus on the left of the Web-based utility. On
the right, there are the corresponding explanations and instructions.
The detailed explanations for each Web page’s key function are listed below.
5.2 Status
The Status page provides the current status information about the Router. All information is
read-only.
-110-
Page 122 / 258
TL-MR3020
Portable 3G/4G Wireless N Router
Figure 5-1
Router Status
5.3 Quick Setup
Please refer to
Chapter 3: "Quick Installation Guide."
5.4 WPS
This section will guide you to add a new wireless device to an existing network quickly by
WPS
(Wi-Fi Protected Setup)
function.
a).
Choose menu “
WPS
”, and you will see the next screen (shown in
Figure 5-2
).
-111-
Page 123 / 258
TL-MR3020
Portable 3G/4G Wireless N Router
Figure 5-2
WPS
WPS Status -
Enable or disable the WPS function here.
Current PIN -
The current value of the Router's PIN displayed here. The default PIN of the
Router can be found in the label or User Guide.
Restore PIN -
Restore the PIN of the Router to its default.
Gen New PIN -
Click this button, and then you can get a new random value for the
Router's PIN. You can ensure the network security by generating a new PIN.
Add device -
You can add the new device to the existing network manually by clicking this
button.
b).
To add a new device:
If the wireless adapter supports Wi-Fi Protected Setup (WPS), you can establish a wireless
connection between wireless adapter and Router using either Push Button Configuration (PBC)
method or PIN method.
Note:
To build a successful connection by WPS, you should also do the corresponding configuration
of the new device for WPS function meanwhile.
For the configuration of the new device, here takes the Wireless Adapter of our company for
example.
I.
By PBC
If the wireless adapter supports Wi-Fi Protected Setup and the Push Button Configuration (PBC)
method, you can add it to the network by PBC with the following two methods.
-112-
Page 124 / 258
TL-MR3020
Portable 3G/4G Wireless N Router
Method One:
Step 1.
Press the WPS/RESET button on the front panel of the Router for less than 5 seconds.
Step 2.
Press and hold the WPS button of the adapter directly for 2 or 3 seconds.
Step 3. Wait for a while until the next screen appears. Click
Finish
to complete the WPS
configuration.
The WPS Configuration Screen of Wireless Adapter
-113-
Page 125 / 258
TL-MR3020
Portable 3G/4G Wireless N Router
Method Two:
Step 4.
Press the WPS/RESET button on the front panel of the Router for less than 5 seconds.
Step 5.
For the configuration of the wireless adapter, please choose
Push the button on my
access point
in the configuration utility of the WPS as below, and click
Next
.
The WPS Configuration Screen of Wireless Adapter
Step 6.
Wait
for
a
wh
o
complete
the
WPS
ile until the next screen appears. Click
Finish
t
configuration.
-114-
19216811.live