1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TL-MR3020
    5. /
  5. 18
Page 86 / 258 Scroll up to view Page 81 - 85
TL-MR3020
Portable 3G/4G Wireless N Router
After click the
Add
button, your PC's MAC Address will be placed in the list above.
Click the
Save
button to save your settings.
Note:
If your PC is blocked but you want to access the Router again, press and hold the
Reset
Button
on the front panel for at least 10 seconds to reset the Router’s factory defaults on the
Router’s Web-Based Utility.
4.9.4
Remote Management
Choose menu “
Security
→
Remote Management
”, you can configure the Remote
Management function in the screen as shown in Figure 4-48. This feature allows you to manage
your Router from a remote location via the Internet.
Figure 4-48 Remote Management
Web Management Port -
Web browser access normally uses the standard HTTP service
port 80. This Router's default remote management web port number is 80. For greater
security, you can change the remote management web port to a custom port by entering
that number in the box provided. Choose a number between 1 and 65534 but do not use
the number of any common service port.
Remote Management IP Address
-
This is the current address you will use when
accessing your Router from the Internet. This function is disabled when the IP address is
set to the default value of 0.0.0.0. To enable this function change 0.0.0.0 to a valid IP
address. If set to 255.255.255.255, then all the hosts can access the Router from internet.
Note:
1)
To access the Router, you should type your Router's WAN IP address into your browser's
address (in IE) or Location (in Navigator) box, followed by a colon and the custom port
number. For example, if your Router's WAN address is 202.96.12.8, and the port number
used is 8080, please enter http://202.96.12.8:8080 in your browser. Later, you may be
asked for the Router's password. After successfully entering the username and password,
you will be able to access the Router's web-based utility.
2)
Be sure to change the Router's default password to a very secure password
.
-75-
Page 87 / 258
TL-MR3020
Portable 3G/4G Wireless N Router
4.10 Parental Control
Choose menu “
Parental Control
”, and you can configure the parental control in the screen as
shown in Figure 4-49. The Parental Control function can be used to control the internet activities
of the child, limit the child to access certain websites and restrict the time of surfing.
Figure 4-49
Parental Control Settings
Parental Control -
Check
Enable
if you want this function to take effect, otherwise check
Disable
.
MAC Address of Parental PC -
In this field, enter the MAC address of the controlling PC,
or you can make use of the
Copy To Above
button below.
MAC Address of Your PC -
This field displays the MAC address of the PC that is
managing this Router. If the MAC Address of your adapter is registered, you can click the
Copy To Above button to fill this address to the MAC Address of Parental PC field above.
Website Description -
Description of the allowed website for the PC controlled.
Schedule
-
The time period allowed for the PC controlled to access the Internet. For
detailed information, please go to “
Access Control
→
Schedule
”.
Modify
-
Here you can edit or delete an existing entry.
To add a new entry, please follow the steps below.
1.
Click the
Add New…
button and the next screen will pop-up as shown in Figure 4-50.
2.
Enter the MAC address of the PC (e.g. 00-11-22-33-44-AA) you’d like to control in the MAC
Address of Child PC field. Or you can choose the MAC address from the All Address in
Current LAN
drop-down list.
3.
Give a description (e.g. Allow Google) for the website allowed to be accessed in the
Website Description field.
-76-
Page 88 / 258
TL-MR3020
Portable 3G/4G Wireless N Router
4.
Enter the allowed domain name of the website, either the full name or the keywords (e.g.
google) in the Allowed Domain Name
field. Any domain name with keywords in it
(
www.google.com
,
www.google.com.hk
) will be allowed.
5.
Select from the Effective Time drop-down list the schedule (e.g. Schedule_1) you want the
entry to take effect. If there are not suitable schedules for you, click the
Schedule
in red
below to go to the Advance Schedule Settings page and create the schedule you need.
6.
In the Status field, you can select
Enabled
or
Disabled
to enable or disable your entry.
7.
Click the
Save
button.
Click the
Enable All
button to enable all the rules in the list.
Click the
Disable All
button to disable all the rules in the list.
Click the
Delete All
button to delete all the entries in the table.
Click the
Next
button to go to the next page, or click the
Previous
button return to the previous
page.
Figure 4-50
Add or Modify Parental Control Entry
For example
: If you desire that the child PC with MAC address 00-11-22-33-44-AA can access
www.google.com
on Saturday only while the parent PC with MAC address 00-11-22-33-44-BB
is without any restriction, you should follow the settings below.
-77-
Page 89 / 258
TL-MR3020
Portable 3G/4G Wireless N Router
1. Click “
Parental Control
” menu on the left to enter the Parental Control Settings page.
Check Enable and enter the MAC address 00-11-22-33-44-BB in the MAC Address of
Parental PC field.
2. Click “
Access Control
→
Schedule
” on the left to enter the Schedule Settings page. Click
Add New...
button to create a new schedule with Schedule Description is Schedule_1, Day
is Sat and Time is all day-24 hours.
3. Click “
Parental Control
” menu on the left to go back to the Add or Modify Parental Control
Entry page:
Click
Add New...
button.
Enter 00-11-22-33-44-AA in the
MAC Address of Child PC
field.
Enter “Allow Google” in the
Website Description
field.
Enter “www.google.com” in the
Allowed Domain Name
field.
Select “Schedule_1” you create just now from the
Effective Time
drop-down list.
In
Status
field, select Enable.
4. Click
Save
to complete the settings.
Then you will go back to the Parental Control Settings page and see the following list, as
shown in Figure 4-51.
Figure 4-51
Parental Control Settings
4.11 Access Control
Figure 4-52 Access Control
There are four submenus under the Access Control menu as shown in Figure 4-52:
Rule
,
Host
,
Target
and
Schedule
. Click any of them, and you will be able to configure the corresponding
function.
4.11.1 Rule
Choose menu “
Access Control
→
Rule
”, and then you can view and set Access Control rules
in the screen as shown in Figure 5-47.
-78-
Page 90 / 258
TL-MR3020
Portable 3G/4G Wireless N Router
Figure 4-53
Access Control Rule Management
Enable Internet Access Control -
Select the check box to enable the Internet Access
Control function, so the Default Filter Policy can take effect.
Rule Name -
Here displays the name of the rule and this name is unique.
Host -
Here displays the host selected in the corresponding rule.
Target -
Here displays the target selected in the corresponding rule.
Schedule -
Here displays the schedule selected in the corresponding rule.
Enable -
Here displays the status of the rule, enabled or not. Check this option to enable a
specific entry.
Modify -
Here you can edit or delete an existing rule.
Setup Wizard -
Click the
Setup Wizard
button to create a new rule entry.
Add New...
-
Click the
Add New...
button to add a new rule entry.
Enable All -
Click the
Enable All
button to enable all the rules in the list.
Disable All -
Click the
Disable All
button to disable all the rules in the list.
Delete All -
Click the
Delete All
button to delete all the entries in the table.
Move -
You can change the entry’s order as desired. Enter in the first box the ID number of
the entry you want to move and in the second box another ID number, and then click the
Move
button to change the entries’ order.
Next -
Click the
Next
button to go to the next page.
Previous -
Click the
Previous
button to return to the previous page.
-79-

Rate

4.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top