TD-W9970
300Mbps Wireless N USB VDSL/ADSL Modem Router User Guide
92
6.
In the
Action
field, select
Deny
or
Allow
to deny or allow your entry.
7.
In the
Status
field, select
Enabled
or
Disabled
to enable or disable your entry.
8.
In the
Direction
field, select
IN
or
OUT
from the drop-down list for the direction.
9.
In the
Protocol
field, here are four options, All, TCP, UDP, and ICMPv6. Select one of them
from the drop-down list for the target.
10. Click the
Save
button to save the settings.
Click the
Enable/ Disable Selected
button to make selected entries enabled or disabled.
Click the
Delete Selected
button to delete selected entries.
4.16.2 IPv6 LAN Host
Choose menu “
IPv6
Firewall
”
→
“
IPv6 LAN
Host
”, and then you can view and set a Host list in
the screen as shown in Figure 4-89.
Figure 4-89
Description:
Here displays the description of the host and this description is unique.
IPv6 Address Info:
Here displays the information about the host.
Edit:
To modify an existing entry.
To add a new entry, please follow the steps below.
1.
Click the
Add New
button, and you will see the screen as shown in Figure 4-90.
Figure 4-90
2.
Create a unique name for the host (e.g. Host_1) in the
Description
field.
3.
Enter an IPv6 address in the
IPv6 Address
field.
4.
Enter the prefix length of the IPv6 address in the
Prefix Length
field.
5.
Click the
Save
button to save the settings.
Click the
Delete Selected
button to delete selected entries.
19216811.live