Page 21 / 117 Scroll up to view Page 16 - 20
TD-W8980
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
12
Figure 3-4
)
Note:
You can configure the PC to get an IP address automatically, select “Obtain an IP address
automatically” and “Obtain DNS server address automatically” in the screen above.
Now, you can run the Ping command in the command prompt to verify the network connection.
Please click the
Start
menu on your desktop, select
run
tab, type
cmd or command
in the field
and press
Enter
. Type
on the next screen, and then press
Enter
.
If the result displayed is similar to the screen below, the connection between your PC and the
modem router has been established.
Figure 3-5
Page 22 / 117
TD-W8980
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
13
If the result displayed is similar to the screen shown below, it means that your PC has not
connected to the modem router.
Figure 3-6
You can check it following the steps below:
1)
Is the connection between your PC and the modem router correct?
The LEDs of LAN port which you link to the device and the LEDs on your PC's adapter should
be lit.
2)
Is the TCP/IP configuration for your PC correct?
If the Router's IP address is 192.168.1.1, your PC's IP address must be within the range of
192.168.1.2 ~ 192.168.1.254.
3.2 Quick Installation Guide
With a Web-based utility, it is easy to configure and manage the TD-W8980 N600 Wireless Dual
Band Gigabit ADSL2+ Modem Router. The Web-based utility can be used on any Windows,
Macintosh or UNIX OS with a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or
Apple Safari.
1.
To access the configuration utility, open a web-browser and type the default address
http://192.168.1.1 in the address field of the browser.
Figure 3-7
After a moment, a login window will appear, similar to the Figure 3-8. Enter
admin
for the
User Name and Password, both in lower case letters. Then click the
OK
button or press the
Enter
key.
Page 23 / 117
TD-W8980
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
14
Figure 3-8
)
Note:
1)
Do not mix up the user name and password with your ADSL account user name and password
which are needed for PPP connections.
2)
If the above screen does not pop up, it means that your Web-browser has been set to a proxy.
Go to
Tools
menu
Internet Options
Connections
LAN Settings
, in the screen that
appears, cancel the Using Proxy checkbox, and click
OK
to finish it.
2.
After your successful login, you will see the Login screen as shown in Figure 3-9. Click
Quick
Setup
menu to access
Quick Setup
Wizard
.
Page 24 / 117
TD-W8980
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
15
Figure 3-9
3.
Change the
VPI/VCI
values which are used to define a unique path for your connection. If you
have been given specific settings for this to configuration, type in the correct values assigned
by your ISP. Click
Next
.
Page 25 / 117
TD-W8980
N600 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
16
Figure 3-10
4.
Please select the Connection Type given by your ISP.
Here we use PPPoE as an example. Click
Next
.
Figure 3-11
5.
Enter the
Username
,
Password
and
Confirm password
given by your ISP, and then click
Next
.
Figure 3-12
6.
Configure the basic parameters for 2.4GHz wireless network in the following screen as shown
in Figure 3-13, and then click
Next
.

Rate

3.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top