TP-Link TD-W8951NB Router Manual PDF (Setup & Configuration Guide)

Page 61 / 94 Scroll up to view Page 56 - 60

TD-W8951NB

150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide

53

Figure 4-35

¾

VLAN Index:

Select the VLAN index for this VC. You can specify 8 groups in maximum.

¾

VLAN ID:

This indicates the VLAN group.

¾

ATM VCs:

Select the ATM VCs as members of VLAN, and if you leave the Tagged blank, the

tag in frames will be deleted when transmitted from the VC.

¾

Ethernet:

Select the Ethernet port as a member of VLAN.

¾

Wireless LAN:

Select the wireless LAN port as a member of VLAN, and if you leave the

Tagged blank, the tag in frames will be deleted when transmitted from the port.

¾

VLAN Group Summary:

This displays the information about the VLAN Groups.

4.4.6 ADSL

Choose “

Advanced Setup

→

ADSL

”, you can select the ADSL Type and ADSL Mode in the next

screen. The ADSL feature can be selected when you meet the physical connection problem.

Please check the proper settings with your Internet service provider.

Page 62 / 94

TD-W8951NB

150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide

54

Figure 4-36

¾

ADSL Mode:

Select the ADSL operation mode which your ADSL connection uses.

¾

ADSL Type:

Select the ADSL operation type which your ADSL connection uses.

4.5

Access Management

Choose “

Access Management

”, you can see the next submenus:

Figure 4-37

Click any of them, and you will be able to configure the corresponding function.

4.5.1 ACL

Choose “

Access Management

→

ACL

”, you can see the next screen (shown in Figure 4-38). You

can specify the client to access the ADSL Router once setting his IP as a Secure IP Address

through selected applications.

Page 63 / 94

TD-W8951NB

150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide

55

Figure 4-38

¾

ACL:

If

Activated

, the IP addresses which are contained in the Access Control List can

access to the Router. If

Deactivated

, all IP addresses can access to the Router.

¾

ACL Rule Index:

Select the ACL rule index for the entry.

¾

Active:

Enable the ACL rule.

¾

Secure IP Address:

Select the IP addresses which are permitted to access to the Router

remotely. With the default IP 0.0.0.0, any client would be allowed to remotely access the

ADSL Router.

¾

Application:

Select the application for the ACL rule, and then you can access the Router

through it.

¾

Interface:

Select the interface for access: LAN, WAN or Both.

¾

Access Control of Listing:

This displays the information about the ACL Rules.

4.5.2 Filter

Choose “

Access Management

→

Filter

”, you can see the Filter screen (the default is IP/MAC

Filter screen shown in Figure 4-39 ). The filtering feature includes IP/MAC Filter, Application Filter,

and URL Filter. The feature makes it possible for administrators to control user's access to the

Internet, protect the networks.

Page 64 / 94

TD-W8951NB

150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide

56

4.5.2.1 IP Filter

Select

IP/MAC Filter

as the Filter type, and select

IP

as the Rule type (shown in Figure 4-39), then

you can configure the filter rules based on IP address. The filtering includes

Outgoing

and

Incoming

, the detailed descriptions are provided below.

Figure 4-39

¾

Filter Type Selection:

Select the filter type for the configuration below.

¾

IP/MAC Filter Set Index:

Select the Set index for the IP Filter entry. This index can match

with six IP / MAC Filter Rule Indexes.

¾

Interface:

Select the interface for the entry.

Page 65 / 94

TD-W8951NB

150Mbps Wireless N ADSL2+ Modem Router (Annex B) User Guide

57

)

Note:

If select PVC0~PVC7 as an interface, the filter will match the IP traffic of WAN port with specified

IPs (Source IP Address and Destination IP Address). If select LAN as an interface, the filter will

match the IP traffic of LAN port with specified IPs.

¾

Direction:

Select the direction for this IP Filter rule. There are three filtering directions: Both,

Incoming, Outgoing.

)

Note:

Incoming means that IP traffic which is coming into the router, and the Outgoing means that IP

traffic which is going out the router.

¾

IP/MAC Filter Rule Index:

Select the Rule index for the IP Filter entry.

)

Note:

You should set the IP/MAC Filter Set Index and IP/MAC Filter Rule Index together to appoint the

address (shown in the Filter List) for the IP Filter rule. For example, (1, 2), it means the rule will be

shown in the row 2 IP/MAC Filter Set Index 1.

¾

Rule Type:

For IP Filter, please select IP here.

¾

Active:

Select “Yes” to make the rule to take effect.

¾

Source IP Address:

Enter the source IP address for the rule. You can enter 0.0.0.0; it means

that all IP addresses are controlled by the rule.

¾

Destination IP Address:

Enter the destination IP address for the rule. You can enter 0.0.0.0,

it means that all IP addresses are controlled by the rule. The set of Subnet Mask and Port

Number are same as Source IP Address.

¾

Subnet Mask:

Enter the Subnet Mask

for the rule.

¾

Port Number:

Enter the Port Number for the rule. You can enter 0, which means that all ports

are controlled by the rule.

¾

Protocol:

Select the protocol:

TCP

,

UDP

or

ICMP

for the filter rule.

¾

Rule Unmatched:

If the current rule can not match, and you select

Forward

, the router will

skip the rule and transmit directly.

If you select

(show in Filter list) to match.

¾

IP/MAC Filter Listing:

This displays the information about the IP Filter rules.

To add an IP Address filtering entry:

For example:

If you desire to block E-mail received and sent by the IP address 192.168.1.7 on

your local network; And wish to make the PCs with IP address 192.168.1.8 unable to visit the

website of IP address 202.96.134.12, while other PCs have no limit. You can configure the rules

Rate

Popular TP-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share