Page 81 / 94
Scroll up to view Page 76 - 80
TD-W8950ND
150Mbps Wireless Lite N ADSL2+ Modem Router User Guide
Figure 4-94
¾
Automatically synchronize with Internet time servers: Select the checkbox to make your router
synchronize its time with Internet time severs.
¾
First/Second NTP time server: Select a time server for your router.
¾
Time zone offset: Select your time zone.
4.8.6 Access Control
Choose “Management
→
Access Control” menu, and you will submenus as shown in Figure 4-95.
Figure 4-95
4.8.6.1 Service
Choose “Access Control
→
Service” menu, and you can enable or disable the services as shown in
Figure 4-96. Click Save/Apply to save your configurations.
74
Page 82 / 94
TD-W8950ND
150Mbps Wireless Lite N ADSL2+ Modem Router User Guide
Figure 4-96
4.8.6.2 IP Address
Choose “Access Control
→
IP Address” menu, and can view and configure the IP address access
control in the screen as shown in Figure 4-97. If enabled, only PCs with IP addresses listed are
allowed to access the Router.
Figure 4-97
To add a new entry, follow the steps below.
1.
Click the Add button in Figure 4-97 to go to the Access Control page in the screen as shown
in Figure 4-98.
2.
Enter the IP address (e.g. 192.168.1.23) you want to add in the IP Address filed.
3.
Click Save/Apply to save your configuration.
Figure 4-98
4.8.6.3 Password
Choose “Access Control
→
Password” menu, and you can change the factory default password of
the Router in the screen as shown in Figure 4-99.
75
Page 83 / 94
TD-W8950ND
150Mbps Wireless Lite N ADSL2+ Modem Router User Guide
Figure 4-99
4.8.7 Update Software
Choose “Management
→
Update Software”, you can see the screen (shown in Figure 4-100) which
allows you to upgrade the latest version software to keep the Router up to date.
Figure 4-100
¾
Browse: Click the button to locate the latest software for the device.
¾
Update Firmware: After you have selected the latest software, click the button.
To update the Router's software:
1.
2.
Click Browse to view the folders and select the image file or enter the exact path to the image
file location in the text box.
3.
Click the Update Firmware button.
)
Note:
1)
There is no need to upgrade the firmware unless the new firmware has a new feature you
want to use. However, when experiencing problems caused by the Router itself, you can try to
upgrade the firmware.
2)
Before upgrading the Router’s firmware, you should write down some of your customized
settings to avoid losing important configuration settings of the Router.
76
Page 84 / 94
TD-W8950ND
150Mbps Wireless Lite N ADSL2+ Modem Router User Guide
3)
Do not turn off the Router or press the Reset button while the software is being updated.
4)
The Router will reboot after the Upgrading is finished.
4.8.8 Reboot
Choose “Management
→
Reboot”, you can see the screen (shown in Figure 4-101) which allows
you to reboot the Router.
Figure 4-101
)
Note:
1)
After you clicked the Reboot button, please wait for a while before reopening your web
browser.
2)
Do not turn off the Router or press the Reset button while the Router is rebooting.
3)
If necessary, reconfigure your PC's IP address to match your new configuration.
77
Page 85 / 94
TD-W8950ND
150Mbps Wireless Lite N ADSL2+ Modem Router User Guide
Appendix A: FAQ
1.
How do I configure the Router to access Internet by ADSL users?
1)
First, configure the ADSL Modem configured in RFC1483 bridge model.
2) Connect the Ethernet cable from your ADSL Modem to the WAN port on the Router. The
telephone cord plugs into the Line port of the ADSL Modem.
3) Log in to the Router, and configure the WAN connection type as PPPoE connection mode.
The detailed steps please refer to section 4.5.1.
4) If your ADSL lease is in “pay-according-time” mode, select “Dial on Demand” for Internet
connection mode.
)
Note:
If you are a Cable user, please configure the Router following the above steps.
2.
The wireless stations cannot connect to the Router.
1)
Make sure the "Enable Wireless Router Radio" is checked.
2)
Make sure that the wireless stations' SSID accord with the Router's SSID.
3)
Make sure the wireless stations have right KEY for encryption when the Router is encrypted.
4)
If the wireless connection is ready, but you can’t access the Router, check the IP Address of
your wireless stations.
78
19216811.live