1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. TD-W8910G
    5. /
  5. 15
Page 71 / 83 Scroll up to view Page 66 - 70
TD-W8910G
54M Wireless ADSL2+ Router User Guide
5.7.1.3. Restore Default
Choose “
Management
”
Æ
“
Settings
”
Æ
“
Restore Default
”, you can see the
Restore Default
screen, this screen (shown in Figure 5-69) allows you to restore the Router’s configuration to the
factory defaults on the screen.
Figure 5-69
¾
Restore Default Settings:
Click this button to restore the Router’s configuration to the
factory defaults, and then follow the on-screen instructions to complete it.
¾
Account and Password:
The default
account name
and its
password
are both admin.
¾
The default
IP Address:
192.168.1.1.
¾
The default
Subnet Mask:
255.255.255.0.
5.7.2 System Log
Choose “
Management
”
Æ
“
System Log
”, you can see the
System Log
screen, this screen
(shown in Figure 5-70) allows you to view the system log and configure the system log options.
Figure 5-70
To View the System Log:
Click the
View System Log
button, you will see the screen (shown in Figure 5-71) which displays
the Router’s recent logs.
Figure 5-71
71
Page 72 / 83
TD-W8910G
54M Wireless ADSL2+ Router User Guide
¾
Refresh:
Click the button, the information in the table will be updated.
¾
Close:
Click the button, the screen will be closed.
To Configure the System Log Settings:
Click the
Configure System Log
button (shown in Figure 5-70), you will see the screen below
(shown in Figure 5-72).
Figure 5-72
¾
Disable/Enable:
Select the
Enable
to log the events, if you don’t want to log these events,
please select
Disable
.
¾
Log Level:
Select the Log level in the drop-down list, for the Log level, all events above or
equal to the selected level will be logged.
¾
Display Level:
Select the Display level in the drop-down list, for the Display Level, all logged
events above or equal to the selected level will be displayed.
¾
Mode:
Select the mode to record the events. If the selected mode is
Local,
events will be
recorded in the local memory. If the selected mode is
Remote
, events will be sent to the
specified IP address and UDP port of the remote system log server. If the selected mode is
Both
, events will be sent to the local memory and the remote system log server.
¾
Server IP Address:
Type the address of the server you want to record the events.
¾
Server UDP Port:
Type the UDP Port of the server.
5.7.3 TR-069 client
Choose “
Management
”
Æ
“
TR-069 client
”, you can see the TR-069 client - Configuration screen,
this screen (shown in Figure 5-73).
TR-069
（
WAN Management Protocol
）
allows a Auto-Configuration Server (ACS) to perform
72
Page 73 / 83
TD-W8910G
54M Wireless ADSL2+ Router User Guide
auto-configuration, provision, collection, and diagnostics to this device.
Figure 5-73
¾
Inform:
You can select the checkbox to disable or enable the
Inform Interval.
¾
Inform Interval:
Type the interval time of your Router contact with the
ACS
.
¾
ACS
URL:
Please
accept
this
information
from
your
ISP.
And
through
ACS
(Auto-Configuration Server) you can perform auto-configuration, provision, collection, and
diagnostics to this router.
¾
ACS User Name:
Please accept this User Name information from your ISP.
¾
ACS Password:
Please accept the Password information from your ISP.
Note:
If you want to log on the
ACS
, you must owned the
ACS User Name
and
ACS Password
.
¾
Connection Request User Name:
Type the Connection Request User Name, set it yourself.
¾
Connection Request Password:
Type the Connection Request Password, set it yourself.
Note:
The Connection Request User Name and Connection Request Password used for
ACS
log on the
Router and manage it.
¾
GetRPCMethods:
Click this button to contact with
ACS
.
Note:
RPC- R
emote
P
rocedure
C
alls
Select the desired values and click "Save/Apply" to configure the TR-069 client options.
73
Page 74 / 83
TD-W8910G
54M Wireless ADSL2+ Router User Guide
5.7.4 Internet Time
Choose “
Management
”
Æ
“
Internet Time
”, you can see the Time settings screen, this screen
(shown in Figure 5-74) allows you to set the time for the Router.
Figure 5-74
To set the Router’s time:
1.
Select automatically synchronize with Internet time servers.
2.
Select the First NTP time server and/or the Second NTP time server in the drop-down list
severally.
3.
Select your local time zone.
4.
Click
Save/Apply
button.
Note:
This setting will be used for some time-based functions such as firewall. You must specify your
time zone once you login to the Router successfully, if not, the time limited on these functions will
not take effect.
The time will be lost if the Router is turned off.
The Router will obtain the time automatically from Internet if it has already connected to Internet.
5.7.5 Access Control
This section provides three submenus including
Services
,
Addresses
and
Password
(shown in
Figure 5-75), the detailed descriptions are provided below.
Figure 5-75
74
Page 75 / 83
TD-W8910G
54M Wireless ADSL2+ Router User Guide
5.7.5.1. Services
Choose “
Management
”
Æ
“
Access Control
”
Æ
“
Services
”, you can see the
Services
screen, this
screen (shown in Figure 5-76) allows you to select the services for LAN Ports and WAN Port.
After you have completed, click the
Save/Apply
button to make sure your selection.
Figure 5-76
Note:
WAN are not available for the connection type of
Bridge
here, they won’t display on the screen
above since only Bridge is selected.
5.7.5.2. IP Addresses
Choose “
Management
”
Æ
“
Access Control
”
Æ
“
IP Addresses
”, you can see the
IP Address
screen, this screen (shown in Figure 5-77) allows you to configure the IP Address for managing
the Router.
Figure 5-77
To add the IP Address:
1.
Click the
Add
button. You can add a new IP Address in the next screen (shown in Figure
5-78).
75

Rate

3.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top