Page 71 / 85
Scroll up to view Page 66 - 70
TD-W8901N
150Mbps Wireless N ADSL2+ Modem Router User Guide
63
Figure 4-44
¾
UPnP:
Activate or Deactivate the UPnP function. Only when the function is activated, can the
UPnP take effect.
¾
Auto-Configure:
If you activate the function, then the UPnP network devices can
automatically configure network addressing, announce their presence in the network to other
UPnP devices and enable exchange of simple product and service descriptions.
4.5.5 DDNS
Choose “
Access Management
→
DDNS
”, you can configure the DDNS function in the screen
(shown in Figure 4-45).
The router offers a Dynamic Domain Name System (
DDNS
) feature. The feature lets you use a
static host name with a dynamic IP address. User should type the host name, user name and
password assigned to your ADSL Router by your Dynamic DNS provider. User also can decide to
turn on DYNDNS Wildcard or not.
Figure 4-45
¾
Dynamic DNS:
Activate the DDNS function or not.
Page 72 / 85
TD-W8901N
150Mbps Wireless N ADSL2+ Modem Router User Guide
64
¾
Service Provider:
This field displays the service provider of DDNS.
¾
My Host Name:
Enter your host name here.
¾
E-mail Address:
Enter your E-mail address here.
¾
Username & Password:
Type the “User Name” and “Password” for your DDNS account.
¾
Wildcard support:
Select the option to use Wildcard function
4.5.6 CWMP
Choose “
Access Management
→
CWMP
”, you can configure the CWMP function in the screen
(shown in Figure 4-46).
The router offers CWMP feature. The function supports TR-069 protocol which collects information,
diagnoses the devices and configures the devices automatically via ACS (Auto-Configuration
Server).
Figure 4-46
¾
CWMP:
Select activate the CWMP function.
¾
URL:
Enter the website of ACS which is provided by your ISP.
¾
User Name/Password:
Enter the User Name and password to login the ACS server.
¾
Path:
Enter the path that connects to the ACS server.
¾
Port:
Enter the port that connects to the ACS server.
Page 73 / 85
TD-W8901N
150Mbps Wireless N ADSL2+ Modem Router User Guide
65
¾
User Name/Password:
Enter the User Name and Password that provided the ACS server to
login the router.
¾
Periodic Inform:
Activate or deactivate the function. If Activated, the information will be
informed to ACS server periodically.
¾
Interval:
Enter the interval time here.
4.6
Maintenance
Choose “
Maintenance
”, you can see the next submenus:
Figure 4-47
Click any of them, and you will be able to configure the corresponding function.
4.6.1 Administration
Choose “
Maintenance
→
Administration
”, you can set new password for admin in the screen
(shown in Figure 4-48).
Figure 4-48
)
Note:
There is only one account that can access Web-Management interface. The default account is
"admin", and the password is "admin". Admin has read/write access privilege.
When you change the password, you should enter the new password twice, and then click SAVE
to make the new password take effect.
Page 74 / 85
TD-W8901N
150Mbps Wireless N ADSL2+ Modem Router User Guide
66
4.6.2 Time Zone
Choose “
Maintenance
→
Time Zone
”, you can configure the system time in the screen (shown in
Figure 4-49).
The system time is the time used by the device for scheduling services. There are three methods
to configure the time. You can manually set the time or connect to a NTP (Network Time Protocol)
server. If a NTP server is set, you will only need to set the time zone. If you manually set the time,
you may also set Daylight Saving dates and the system time will automatically adjust on those
dates.
1)
NTP Server automatically
Select
NTP Server automatically
as the Synchronize time, you only need to set the time zone.
Figure 4-49
)
Note:
The ADSL Router built-in some NTP Servers, when the Router connects to the Internet, the Router
will get the system time automatically from the NTP Server. You can also configure the NTP Server
address manually, and then the Router will get the time from the specific Server firstly.
2)
PC’s Clock
Select
PC’s Clock
as the Synchronize time, you don’t need to set any items.
Page 75 / 85
TD-W8901N
150Mbps Wireless N ADSL2+ Modem Router User Guide
67
Figure 4-50
3)
Manually
Select
Manually
as the Synchronize time, you need to set the date and time corresponding to the
current time.
Figure 4-51
4.6.3 Firmware
Choose “
Maintenance
→
Firmware
”, you can upgrade the firmware of the Router in the screen
(shown in Figure 4-52). Make sure the firmware or romfile you want to use is on the local hard
drive of the computer. Click
Browse
to find the local hard drive and locate the firmware or romfile
to be used for upgrade.
19216811.live