Page 16 / 73
Scroll up to view Page 11 - 15
TD-W8901G
54Mbps Wireless ADSL2+ Modem Router User Guide
Step 4:
Configure the IP address as Figure 3-4 shows. After that, click
OK
.
Figure 3-4
)
Note:
You can c
onfigure the PC to get an IP address automatically, select “Obtain an IP address
automatically” and “Obtain DNS server address automatically” in the screen above.
Now, you can run the Ping command in the command prompt to verify the network connection.
Please click the
Start
menu on your desktop, select
run
tab, type
cmd or command
in the field
and press
Enter
. Type
on the next screen, and then press
Enter
.
If the result displayed is similar to the screen below, the connection between your PC and the
Router has been established.
10
Page 17 / 73
TD-W8901G
54Mbps Wireless ADSL2+ Modem Router User Guide
Figure 3-5
If the result displayed is similar to the screen shown below, it means that your PC has not
connected to the Router.
Figure 3-6
You can check it following the steps below:
1)
Is the connection between your PC and the Router correct?
The LEDs of LAN port which you link to the device and the LEDs on your PC's adapter should
be lit.
2)
Is the TCP/IP configuration for your PC correct?
If the Router's IP address is
192.168.1.1, your PC's IP address must be within the range of
192.168.1.2 ~ 192.168.1.254.
3.2
Login
Once your host PC is properly configured, please proceed as follows to use the Web-based Utility:
Start your web browser and type the private IP address of the Router in the URL field:
192.168.1.1
.
After that, you will see the screen shown below, enter the default User Name
admin
and the
default Password
admin
,
and then click
OK
to access to the
Quick Start
screen. You can follow
the steps below to complete the Quick Start.
11
Page 18 / 73
TD-W8901G
54Mbps Wireless ADSL2+ Modem Router User Guide
Figure 3-7
Step 1:
Select the
Quick Start
tab, then click
RUN WIZARD
, and you will see the next screen.
Click the
NEXT
button.
Figure 3-8
Step 2:
Configure the time for the Router, and then click the
NEXT
button.
Figure 3-9
Step 3:
Select the connection type to connect to the ISP (We select
PPPoE/PPPoA
mode for
example here), and then click the
NEXT
button.
12
Page 19 / 73
TD-W8901G
54Mbps Wireless ADSL2+ Modem Router User Guide
Figure 3-10
Step 4:
Configure the following options provided by your ISP:
Username
,
Password
,
VPI
,
VCI
and
Connection Type
. Then click
NEXT
.
Figure 3-11
Step 5:
Configure the rules for the WLAN, and click
NEXT
.
13
Page 20 / 73
TD-W8901G
54Mbps Wireless ADSL2+ Modem Router User Guide
Figure 3-12
)
Note:
If the Access Point is activated, the wireless function will be available even without the external
antenna because of an additional printed antenna. To adopt the wireless security protection
measures, please refer to
Section 4.3.3
.
Step 6:
Click
NEXT
to finish the Quick Start.
Figure 3-13
14
19216811.live