Page 11 / 22
Scroll up to view Page 6 - 10
TD-8616B
ADSL2/2+ Ethernet Modem User Guide
6
Figure 3-2
Step 3:
Select
General
tab, highlight Internet Protocol (TCP/IP), and then click the
Properties
button.
Figure 3-3
Page 12 / 22
TD-8616B
ADSL2/2+ Ethernet Modem User Guide
7
Step 4:
Configure the IP address (Figure 3-4): Enter the IP address as 192.168.1.* (* is any
value between 2 to 254, Subnet mask is 255.255.255.0). After that, click
OK
.
Figure 3-4
)
Note:
1)
The users of Windows 98 can open
TCP/IP Properties
according to the following:
Right-press (Mouse)
Network Neighbor
-> Choose
Properties
-> Double-press
TCP/IP. PCI
Fast Ethernet Adapter
.
2)
The words in fact maybe are different with this guide.
Now, you can run the Ping command in the command prompt to verify the network connection.
Please click the
Start
menu on your desktop, select
run
tab, type
cmd
in the field and press
Enter
. To continue, please type
on the following appeared command prompt
screen and then press
Enter
.
If the result displayed is similar to the screen below, the connection between your PC and the
Modem has been established.
Page 13 / 22
TD-8616B
ADSL2/2+ Ethernet Modem User Guide
8
Figure 3-5
If the result displayed is similar to the screen shown below, it means that your PC has not
connected to the Modem.
Figure 3-6
You can check it follow the steps below:
1)
Is the connection between your PC and the Modem correct?
The LEDs of LAN port which you link to the device and the LEDs on your PC's adapter should
be lit.
2)
Is the TCP/IP configuration for your PC correct?
If the Modem's IP address is
192.168.1.1, your PC's IP address must be within the range of
192.168.1.2 ~ 192.168.1.254.
3.2
Login
Once your host PC is properly configured, please proceed as follows to use the Web-based Utility:
Start your web browser and type the private IP address of the Modem in the URL field:
192.168.1.1
.
After that, you will see the screen shown below, enter the default User Name
admin
and the
default Password
admin
,
and then click
OK.
Page 14 / 22
TD-8616B
ADSL2/2+ Ethernet Modem User Guide
9
Figure 3-7
After that you will see the page as follow when ADSL connection is OK.
Figure 3-8
Page 15 / 22
TD-8616B
ADSL2/2+ Ethernet Modem User Guide
10
Chapter 4.
Software Configuration
This User Guide recommends using the “Quick Installation Guide” for first-time installation. For
advanced users, if you want to know more about this device and make use of its functions
adequately, maybe you will get help from this chapter to configure the advanced settings through
the Web-based Utility.
After your successful login, you can configure and manage the device. There are main menus on
the top of the Web-based Utility, submenus will be available after you click one of the main menus.
On the center of the Web-based Utility, there are the detailed configurations or status information.
To apply any settings you have altered on the page, please click the
SAVE
button.
4.1
Statistics
Choose “
Statistics
”, you can see the next submenus:
Device Information
and
Traffic Statistics
.
Click any of them, and you will be able to configure the corresponding function.
Figure 4-1
Choose “
Statistics
→
Device Information
” menu, and you will be able to view the device
information, including LAN, WAN and ADSL. The information will vary depending on the settings
of the Modem configured on the Basic Setup screen.
19216811.live