Page 16 / 122 Scroll up to view Page 11 - 15
12
Chapter 2
Connect the Hardware
3 )
The WPS LED flashes for about two minutes during the WPS process.
4 )
When the WPS LED is on, the client device has successfully connected to the
modem router.
Page 17 / 122
Chapter
3
Log into Your Modem
Router
Page 18 / 122
14
Chapter 3
Log into Your Modem Router
With a Web-based utility, it is easy to configure and manage the Archer VR900 AC1900
Wireless Gigabit VDSL/ADSL Modem Router. The Web-based utility can be used on
any Windows, Macintosh or UNIX OS with a Web browser, such as Microsoft Internet
Explorer, Mozilla Firefox or Apple Safari.
Follow the steps below to log into your modem router.
If the TCP/IP Protocol on your computer is set to the static (fixed) IP address, you
need to change it to obtain an IP address automatically. Refer to
Appendix B:
Troubleshooting
to configure your computer.
Launch a web browser and type in
http://tplinkmodem.net
or
. Set
a strong password using 1-15 characters and click
Save
.
Enter the password you set and click
Login
.
Note:
For subsequent logins, you only need to enter the password that you have set to log in.
Page 19 / 122
Chapter
4
Set Up Internet
Connections
This chapter introduces how to connect your modem router to the Internet. The
modem router is equipped with a web-based Quick Setup wizard. It has many ISP
information built in, automates many of the steps and verifies that those steps have
been successfully completed. Furthermore, you can also set up an IPv6 connection if
your ISP provided IPv6 service.
This chapter includes the following sections:
Use Quick Setup Wizard
Manually Set up an Internet Connection
Set up an IPv6 Connection
Test Internet Connectivity
Page 20 / 122
16
Chapter 4
Set Up Internet Connections
4° 1°
Use Quick Setup Wizard
To set up your modem router with several easy steps quickly:
Visit
http://tplinkmodem.net
, and log in with the password you set for the modem
router.
Click
Quick Setup
, select your
Region
and
Time Zone
. Then click
Next
.
Note:
1.
Per FCC regulations, all Wi-Fi products marketed in the U.S. must be fixed to the U.S. region only.
2.
Per EU requirements, all Wi-Fi products marketed in EU, U.S. region is not selectable.
Select your
ISP
from the dropdown list or select
Other
if you can’t find your ISP, then
click
Next
.
Follow the on-screen instructions to complete the setup.
Note:
1.
During the quick setup process, you can change the preset wireless network name (SSID) and wireless password.
Once done, all your wireless devices must use the new SSID and password to connect to the modem router.
2.
The modem router supports three operation modes, DSL Modem Router Mode, 3G/4G Router Mode and Wireless
Router mode. If you already have a modem or your Internet comes via an Ethernet cable from the wall, you can
set up the modem router as a regular wireless router to share the Internet. Refer to
Appendix B: Troubleshooting
for details.
4° 2°
Manually Set up an Internet Connection
To manually add an Internet connection without following the instructions of the Quick
Setup wizard:
Visit
http://tplinkmodem.net
, and log in with the password you set for the modem
router.

Rate

4.5 / 5 based on 2 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top