Chapter

3

Log into Your 4G LTE Router

13

Chapter 3

Log into Your 4G LTE Router

With a Web-based management page, it is easy to configure and manage the Archer

MR200 AC750 Wireless Dual Band 4G LTE Router. The Web-based management page

can be used on any Windows, Macintosh or UNIX OS with a Web browser, such as

Microsoft Internet Explorer, Mozilla Firefox or Apple Safari.

Follow the steps below to log into your router.

1°

If the TCP/IP Protocol on your computer is set to the static (fixed) IP address, you

need to change it to obtain an IP address automatically. Refer to

Appendix B:

Troubleshooting

to configure your computer.

2°

Launch a web browser and type in

http://tplinkmodem.net

or

. Set

a strong password using 1-15 characters and click

Save

.

3°

Enter the password you set and click

Log in

.

Note:

For subsequent logins, use your password that you have created.

Chapter

4

Set Up Internet

Connections

This chapter introduces how to connect your router to the Internet. The router is

equipped with a web-based Quick Setup wizard. It has many ISP information built

in, automates many of the steps and verifies that those steps have been successfully

completed. Furthermore, you can set up IPv6 connection if your ISP provides IPv6

service.

This chapter includes the following sections:

•

Use Quick Setup Wizard

•

Create a Connection Profile

•

Test Internet Connectivity

15

Chapter 4

Set Up Internet Connections

4° 1°

Use Quick Setup Wizard

To set up your router with several easy steps quickly:

1°

Visit

http://tplinkmodem.net

, and log in with the password you set for the router.

2°

Click

Quick Setup

, confirm the parameters with the information provided by your

ISP and click

Next

.

Note:

Quick Setup is not available if your SIM card is locked. Unlock your SIM card according to the prompt.

3°

Follow the on-screen instructions to complete the setup.

Note:

1.

During the quick setup process, you can change the preset wireless network name (SSID) and wireless password.

Once done, all your wireless devices must use the new SSID and password to connect to the router.

2. The router supports two operation modes, 3G/4G Router Mode and Wireless Router mode. If you already have a

modem or your Internet comes via an Ethernet cable from the wall, you can set up the router as a regular wireless

router to share the Internet. Refer to

Appendix B: Troubleshooting

for details.

4° 2°

Create a Connection Profile

If your ISP settings are not detected by the router, you can create an Internet connection

profile by following the steps below:

1°

Visit

http://tplinkmodem.net

, and log in with the password you set for the router.

2°

Go to

Advanced

>

Network

>

Internet

page.

16

Chapter 4

Set Up Internet Connections

3°

Click

Create Profile

.

4°

Specify the

Profile Name

,

Username

and

Password

. Select the

PDP Type

,

APN Type

and

Authentication Type

according to your ISP.

5°

Click

OK

to make the settings effective and the new profile will be used to set up a

new connection.

Tips:

1.

You can view all Internet connections or edit connections that are set up manually on this page.

2.

You can change the

Network Mode

to

4G Only

or

3G Only

according to your needs.