TP-Link Archer MR200 Router Manual PDF (Setup & Configuration Guide)

Page 81 / 97 Scroll up to view Page 76 - 80

Appendix A: Specifications

HARDWARE FEATURES

Interface

1 10/100Mbps RJ45 WAN/LAN Port

3 10/100Mbps RJ45 LAN Ports

1SIM Card Slot

Button

1 Power On/Off Button

1 Wi-Fi On/Off Button

1 WPS/RESET Button

Antenna Type

WiFi Antenna :3 internal antennas

LTE Antenna: 2 detachable external antennas

Mobile Network FEATURES

Network Type

LTE/DC- HSPA+/HSPA+/HSPA/UMTS/EDGE/GRPS/GSM

Band

FDD-LTE: 800MHz(Band20), 900MHz(Band8), 1800MHz(Band3),

2100MHz(Band1), 2600MHz(Band7)

TDD-LTE: 2300MHz(Band40)

:

2600MHz(Band38)

DC-HSPA+/HSPA+

/

HSPA/UMTS: 900MHz, 2100MHz

EDGE/GPRS/GSM: 850/900/1800/1900MHz

Data Rates

Cat 4

FDD DL: 150Mbps, UL: 50Mbps

TDD DL: 112Mbps, UL: 32Mbps

WIRELESS FEATURES

Wireless Standards

IEEE 802.11ac/n/a 5GHz

IEEE 802.11n/g/b2.4GHz

Wireless Speeds

5GHz: Up to 433Mbps

2.4GHz: Up to 300Mbps

Frequency

2.4GHz:

2412-2472MHz;

5GHz:

5150-5250MHz,

5250-5350MHz,

5470-

5725MHz

EIRP

<20dBm(EIRP)

Wireless Functions

Wireless Radio, WDS Bridge, WMM, Wireless Statistics

Wireless Security

64/128-bit WEP,WPA / WPA2,WPA-PSK/ WPA2-PSK encryption, Wireless MAC

Filtering

Wireless Schedule

Support 2.4GHz and 5GHz Wireless Schedule

Page 82 / 97

SOFTWARE FEATURES

Operation Mode

3G/4G Router, Wireless Router

DHCP

Server, Client, DHCP Client List,

Address Reservation, DHCP relay

Quality of Service

Traffic Control(IP QoS)

Port Forwarding

Virtual server, Port Triggering, DMZ, ALG, UPnP

VPN Pass-through

PPTP, L2TP, IPSec Pass-through

Dynamic DNS

DynDns, NO-IP

IPSec VPN

Supports up to 10 IPSec VPN tunnels

Guest Network

2.4GHz guest network × 1

5GHz guest network × 1

Security

Access Control, MAC Filtering,

IP and MAC Address Binding

Management

Web Based Configuration (HTTP), Remote management,

Command Line Interface,

SSL for TR-069, SNMP v1/2, Web Based Firmware Upgrade, Diagnostic Tools

IPv6

IPv6 and IPv4 dual stack

Advanced Features

Parental Controls

Network Address Translation (NAT); Port Mapping (Grouping), Static Routing,

RIP v1/v2;

DNS Relay, DDNS, IGMP V1/V2/V3,

Physical and Environment

Operating

Temperature

0

℃

~ 40

℃

Working Humidity

10% ~ 90% RH (non-condensing)

Storage Temperature

-40

℃

~ 70

℃

Storage Humidity

5% ~ 90% RH (non-condensing)

*Only 2.412GHz~2.462GHz is allowed to be used in USA, which means only channel 1~11 is available for American

users to choose.

Page 83 / 97

79

Appendix B:

Troubleshooting

T1° How do I restore my router’s configuration to its factory default

settings?

With the router powered on, press and hold the WPS/RESET button on the rear panel

until the Power LED starts flashing.

Note:

Once the router is reset, the current configuration settings will be lost and you will need to re-configure the

router.

T2° What can I do if I forget my password?

Web Management page password:

Restore the router to its factory default settings and then create a new password using

1-15 characters.

Wireless Network password:

1°

The default Wireless Password/PIN is printed on the product label of the router.

2°

If the default wireless password has been changed, log into the router’s web

management page and go to

Basic

>

Wireless

to retrieve or reset your password.

T3° What can I do if

I cannot log into the router’s web management page?

•

Make sure the router connects to the computer correctly and the corresponding

LED indicator(s) light up.

•

Make sure the IP address of your computer is configured as “Obtain an IP address

automatically” and “Obtain DNS server address automatically”.

•

Make sure the default access you input is right.

•

Check your computer’s settings:

1 ) Go to

Start

>

Control Panel

>

Network and Internet

, and click

View network

status and tasks

;

2 )

Click

Internet Options

on the bottom left;

3 )

Click

Connections

, select

Never dial a connection

;

Page 84 / 97

80

4 )

Click

LAN settings

, deselect the following three options and click

OK

;

5 )

Go to

Advanced

>

Restore advanced settings

, click

OK

to save the settings.

Page 85 / 97

81

•

Use another web browser or computer and log in again.

•

Reset the router to factory default settings: With the router powered on, press and

hold the WPS/RESET button on the rear panel of the router until the Power LED

starts flashing.

Note:

You’ll need to reconfigure the router to surf the Internet once the router is reset.

Open a web browser and log in again. If login fails, please contact the technical

support.

T4° What can I do if I cannot access the Internet?

1°

Verify that your SIM card is an LTE, WCDMA or GSM card.

2°

Verify that your SIM card is in your ISP’s service area.

3°

Verify that your SIM card has sufficient credit.

4°

Check the LAN connection:

Open a web browser and enter

http://tplinkmodem.net

or

http://192.168.1.1

in the

address bar. If the login page does not appear, refer to T3 and then try again.

5°

Check your ISP parameters:

1 )

Open a web browser and log in to the web management page.

Rate

Popular TP-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share