1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. Archer D9
    5. /
  5. 16
Page 76 / 125 Scroll up to view Page 71 - 75
Archer
D9
AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
Figure 4-53
Guest Network:
Check this box to enable 5 GHz Guest Network. And you can set wireless
parameters for 5GHz guest network as shown in Figure 4-54.
Figure 4-54
SSID:
The guest network name. When setting up a Guest network, it is strongly
recommended to use a name that easily distinguishes it from your primary network. The
default name is TP-LINK_Guest_5GHz.
Security:
It’s strongly recommended to enable WPA/WPA2-Personal.
Authentication Type:
Select the Authentication Type from the drop-down list or keep the
default setting
Auto
.
Encryption:
You can select
Auto
,
TKIP
or
AES
.
Wireless Password:
You can enter ASCII characters between 8 and 63 characters or 8 to 64
Hexadecimal characters.
Group Key Update Period:
Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
Allow Guests to access my Local Network
: The guests have access to your Local
Network, but can not login the modem router’s web-management page.
Allow Guests to access my USB Storage Sharing:
The guests can access the specified
files on the USB storage device via the function of USB Storage Sharing, but the function of
FTP Server, Media Server and Print Server are not available in Guest Network. For more
details please refer to
4.11.3 Storage Sharing
.
Guest Network Isolation:
This function can isolate wireless clients on your guest network
from each other. Client isolation is disabled by default.
Guest Network Bandwidth Control:
With this function, you can configure the Upstream
/Downstream Bandwidth for guest network.
65
Page 77 / 125
Archer
D9
AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
Click
Save
to save your settings.
4.10.3 Guest Status 2.4GHz
Choose menu “
Guest Network
”
“
Guest Status 2.4GHz
”, you can see the MAC Address,
Current Status, Received Packets and Sent Packets for each connected wireless station.
Figure 4-55
MAC Address:
The connected wireless station's MAC address.
Current Status:
The connected wireless station's running status.
Received Packets:
Packets received by the station.
Sent Packets:
Packets sent by the station.
Click on the
Refresh
button to update this page.
4.10.4 Guest Status 5GHz
Choose menu “
Guest Network
”
“
Guest Status 5GHz
”, you can see the MAC Address, Current
Status, Received Packets and Sent Packets for each connected wireless station.
Figure 4-56
MAC Address:
The connected wireless station's MAC address.
Current Status:
The connected wireless station's running status.
Received Packets:
Packets received by the station.
Sent Packets:
Packets sent by the station.
Click on the
Refresh
button to update this page.
66
Page 78 / 125
Archer
D9
AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
4.11 USB Settings
There are six submenus under the USB Settings menu,
USB Mass
Storage
,
User Accounts
,
Storage Sharing
,
FTP Server
,
Media Server
and
Print Server
. Click any of them, and you will
be able to configure the corresponding function.
4.11.1 USB Mass Storage
Choose menu “
USB Settings
→
“
USB Mass
Storage
”, you can configure a USB disk drive
attached to the modem router and view volume and share properties such as share name,
capacity, status, and action, on this page as shown below.
Figure 4-57
Volume:
The volume name of the USB drive the users have access to.
File System:
The system of the USB drive.
Capacity:
The storage capacity of the USB driver.
Status:
Indicates the shared or non-shared status of the volume.
Active
means volume can
be shared, while
Inactive
means volume can not be shared. If
Inactive
in Action
field is
enabled,
Active
will be displayed in the Status field, which means volume can not be shared.
Action:
When the volume is shared, you can click the
Deactivate
to stop sharing the volume;
67
Page 79 / 125
Archer
D9
AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
when volume is non-shared, you can click the
Activate
button to share the volume.
Click
Disconnect
to safely remove the USB storage device that is connected to USB port.
Note:
Before removing the USB storage device, you should click “Disconnect” to make sure that all your
data have been saved completely. Removing device directly may cause your USB storage device
crashed.
4.11.2 User Accounts
You can specify the user name and password for Storage Sharing and FTP Server users on this
page. Storage Sharing users can access the folders by entering the following URL into the
address field of your browser or Windows Explorer, such as. \\192.168.1.1. FTP Server users can
log into the FTP Server via FTP Client.
You can set up five users and control their access to the USB mass storage by Storage Sharing or
FTP on this page. The Super User has the right to read and write to Storage Sharing and FTP
Server.
Figure 4-58
To add a new user account, please follow the steps below:
1.
Choose the index from the drop-down list of
Choose Index
.
2.
Self-define a
New
Username
.
3.
Enter the password in the
New
Password
field.
4.
Re-enter the password in the
Confirm password
field.
5.
Click the
Set
button,
and then a new entry will be added in the table.
To delete an existing user account, please click
Delete
in the
Action
column.
4.11.3 Storage Sharing
Choose menu “
USB Settings
”
→
“
Storage Sharing
”, you can configure a USB disk drive
attached to the modem router and view volume and share properties on this page as shown
below.
68
Page 80 / 125
Archer
D9
AC1900 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
Figure 4-59
Server Status:
Indicates the Storage Sharing's current status.
Anonymous access to all the volumes:
This function is enabled by default, so that users
can access to all activated volumes without authentication. If you want to add a shared folder
which does not allow anonymous login, uncheck the box. Then
Folder Table
will be
displayed
as shown below.
Share Name:
This folder's display name.
Directory:
The real full path of the specified folder.
User Access:
The authorization of users. * users mean Super Users who have the
full-access permission to all activated volumes and share folders. F stands for fully access, R
stands for read-only and N stands for no-access.
Status:
The status of the entry is enabled or disabled.
Edit:
Click
Edit
in the table, and then you can modify the entry.
To add a new folder, follow the instructions below.
1.
Click
Add New Folder
.
69

Rate

3.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top