1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. Archer D7
    5. /
  5. 24
Page 116 / 124 Scroll up to view Page 111 - 115
Archer
D7
AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
105
Figure 4-113
Click the
Restore
button to reset all configuration settings to their default values.
The default
User Name
: admin
The default
Password
: admin
The default
Subnet Mask
: 255.255.255.0
Note:
All changed settings will be lost when defaults are restored.
4.23.8 Firmware Upgrade
Choose menu “
System Tools
→
Firmware Upgrade
”, and then you can update the latest
version of firmware for the modem router on the following screen.
Figure 4-114
Firmware Version:
Displays the current firmware version.
Hardware Version:
Displays the current hardware version. The hardware version of the
upgrade file must accord with the modem router’s current hardware version.
To upgrade the modem router's firmware, follow these instructions below:
1)
Download a most recent firmware upgrade file from our website (www.tp-link.com).
2)
Enter or select the path name where you save the downloaded file on the computer into the
File Name
blank.
3)
Click the
Upgrade
button.
4)
The modem router will reboot while the upgrading has been finished.
Page 117 / 124
Archer
D7
AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
106
Note:
1)
New firmware versions are posted at http://www.tp-link.com and can be downloaded for free.
There is no need to upgrade the firmware unless the new firmware has a new feature you
want to use. However, when experiencing problems caused by the modem router rather than
the configuration, you can try to upgrade the firmware.
2)
When you upgrade the modem router's firmware, you may lose its current configurations, so
before upgrading the firmware please write down some of your customized settings to avoid
losing important settings.
3)
Do not turn off the modem router or press the Reset button while the firmware is being
upgraded. Loss of power during the upgrade could damage the modem router.
4)
The firmware version must correspond to the hardware.
5)
The upgrade process takes a few moments and the modem router restarts automatically
when the upgrade is complete.
4.23.9 Reboot
Choose menu “
System Tools
”
→
“
Reboot
”, and then you can click the
Reboot
button to reboot
the modem router via the next screen.
Figure 4-115
Some settings of the modem router will take effect only after rebooting, which include
Change the LAN IP Address (system will reboot automatically).
Change the DHCP Settings.
Change the Wireless configurations.
Change the Web Management Port.
Upgrade the firmware of the modem router (system will reboot automatically).
Restore the modem router's settings to factory defaults (system will reboot
automatically).
Update the configuration with the file (system will reboot automatically.
4.23.10 Statistics
Choose menu “
System Tools
”
→
“
Statistics
”, and then you can view the statistics of the Modem
router, including total traffic and current traffic of the last Packets Statistic Interval.
Page 118 / 124
Archer
D7
AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
107
Figure 4-116
Statistics Status:
Enable or Disable. The default value is disabled. To enable it, click the
Enable
. If it is disabled, the function of DoS protection in Security settings will be disabled.
Statistics Interval (5-60):
The default value is 10. Select a value between 5 and 60 seconds
in the drop-down list. The Packets Statistic interval indicates the time section of the packets
statistic.
Click
Reset
All
to reset the values of all the entries to zero.
Click
Delete
All
to delete all entries in the table.
Click the
Refresh
button to refresh immediately.
Statistics Table:
IP/MAC Address
The IP and MAC address are displayed with related statistics.
Packets
The total number of packets received and transmitted by the
modem router.
Total
Bytes
The total number of bytes received and transmitted by the
modem router.
Packets
The total number of packets received and transmitted in the last
Packets Statistic interval seconds.
Bytes
The total number of bytes received and transmitted in the last
Packets Statistic interval seconds.
ICMP
Tx
The number of the ICMP packets transmitted to WAN per second
at the specified Packets Statistics interval. It is shown like
“current transmitting rate / Max transmitting rate”.
UDP Tx
The number of UDP packets transmitted to the WAN per second
at the specified Packets Statistics interval. It is shown like
“current transmitting rate / Max transmitting rate”.
Current
SYN Tx
The number of TCP SYN packets transmitted to the WAN per
second at the specified Packets Statistics interval. It is shown like
“current transmitting rate / Max transmitting rate”.
Page 119 / 124
Archer
D7
AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
108
Reset
Reset the value of he entry to zero.
Operation
Delete
Delete the existing entry in the table.
4.24 Logout
Choose “
Logout
”, and you will back to the login screen as shown in Figure 4-117.
Figure 4-117
Page 120 / 124
Archer
D7
AC1750 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide
109
Appendix A: Specifications
General
Standards and Protocols
ANSI T1.413, ITU G.992.1, ITU G.992.3, ITU G.992.5,
IEEE 802.11a, IEEE 802.11b, IEEE 802.11g, IEEE 802.11n, IEEE
802.11ac, IEEE 802.3, IEEE 802.3u, IEEE802.3ab,
TCP/IP, PPPoA,
PPPoE, SNTP, HTTP, DHCP, ICMP, NAT
Safety & Emission
FCC, CE
Ports
Four 10/100/1000M Auto-Negotiation RJ45 ports
（
Auto MDI/MDIX)
One RJ11 port
Two USB 2.0 ports
LEDs
WPS,
USB,
(LAN),
Wireless,
Internet,
ADSL,
Power
Network Medium
10Base-T:
UTP category 3, 4, 5 cable
100Base-TX: UTP category-5, 5e cable
1000Base-TX: UTP category-5, 5e cable
Max line length: 6.5Km
Data Rates
Downstream: Up to 24Mbps
Upstream: Up to 1Mbps
System Requirement
Windows 8/7/Vista/XP or Mac OS or Linux-based operating system
Microsoft Internet Explorer, Firefox, Chrome or Safari browser for
web-based configuration
Physical and Environment
Working Temperature
0
~ 40
℃
℃
Working Humidity
10% ~ 90% RH (non-condensing)
Storage Temperature
-40
~ 70
℃
℃
Storage Humidity
5% ~ 90% RH (non-condensing)

Rate

4 / 5 based on 1 vote.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top