Archer

D5

AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide

15

Figure 3-13

The basic settings for your modem router are completed. Please open the web browser and try to

log on to

to test your Internet connection.

Archer

D5

AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide

16

Chapter 4. Configuring the Modem Router

This chapter will show configuration for the key functions on the Web-based management page.

4.1 Login

After your successful login, you will see the twenty-three main menus on the left of the Web-based

utility. On the right, there are the corresponding explanations and instructions.

The detailed explanations for each Web page’s key function are listed below.

Archer

D5

AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide

17

4.2 Status

Choose “

Status

”, you can see the corresponding information about

Device Information

,

DSL

,

WAN

,

LAN

and

Wireless

.

Archer

D5

AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide

18

Figure 4-1

Archer

D5

AC1200 Wireless Dual Band Gigabit ADSL2+ Modem Router User Guide

19

4.3 Quick Setup

Please refer to

3.2 Quick Installation Guide

.

4.4 Operation Mode

Choose “

Operation Mode

”, and you will see the screen as shown in Figure 4-2. Select your

desired mode and then click

Save

.

Figure 4-2



DSL Modem Router Mode:

The device enables multi-users to share Internet via ADSL using

its ADSL port and share it wirelessly at 867Mbps wireless speeds over the crystal clear 5GHz

band and 300Mbps over the 2.4GHz band.



Wireless Router Mode:

The device enables multi-users to share Internet via Ethernet WAN

(EWAN) using its interchangeable LAN4/WAN port and share it wirelessly at 867Mbps wireless

speeds over the crystal clear 5GHz band and 300Mbps over the 2.4GHz band.

After you click the

Save

button, the Note Dialog will appear. Click

OK

and then the modem router

will reboot. Please wait.

Note Dialog

4.5 Network

Choose “

Network

”, there are many submenus under the main menu. Click any one of them, and

you will be able to configure the corresponding function.