1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. Archer D2
    5. /
  5. 18
Page 86 / 119 Scroll up to view Page 81 - 85
82
Chapter 12
Specify Your Network Settings
Set up the IPv6 tunnel though my ISP doesn’t provide me with
the tunnel service.
1°
Visit
http://tplinkmodem.net
, and log in with the password
you set for the modem router.
2°
Go to
Advanced
>
Network
>
IPv6 Tunnel
.
3°
Tick the check box, select
6to4
as the tunneling mechanism
and select a WAN connection from the drop-down list, then
click
Save
.
Note:
If there is no available WAN connection to choose, make sure you have connected to
the Internet and the connection type is not Bridge.
Now you can visit the IPv6 websites with the 6to4 tunnel.
Note:
Still not being able to access IPv6 resources means that not any 6to4 public server was found in your network. You
can contact your ISP to sign up for IPv6 connection service.
12° 7° 2°
Specify the 6rd Tunnel with Parameters Provided by Your ISP
Specify the 6rd tunnel with the parameters provided by my 6rd
tunnel service provider.
1°
Visit
http://tplinkmodem.net
, and log in with the password
you set for the modem router.
2°
Go to
Advanced
>
Network
>
IPv6 Tunnel
.
3°
Tick the check box, select
6rd
as the tunneling mechanism
and select a WAN connection from the drop-down list.
4°
According to the parameters provided by your ISP, choose
Auto
or
Manual
. More parameters are needed if you choose
Manual
.
5°
Click
Save
.
I want to:
How can I
do that?
Done!
I want to:
How can I
do that?
How can I
do that?
Page 87 / 119
83
Chapter 12
Specify Your Network Settings
Note:
If there is no available WAN connection to choose, make sure you have connected to
the Internet and the connection type is not Bridge.
Now you can visit the IPv6 websites with the 6rd tunnel.
Tips:
The way to set up DS-Lite tunnel is similar to that of 6rd tunnel. If you are provided with an IPv6-only WAN connection
and have signed up for DS-Lite tunnel service, specify the DS-Lite tunnel by referring to the steps above.
Done!
Page 88 / 119
Chapter
13
Administrate Your Network
This chapter introduces how to change the system settings and administrate your
modem router’s network.
This chapter contains the following sections:
•
Set System Time and Region
•
Update the Firmware
•
Back up and Restore Configuration Settings
•
Change the Administrator Account
•
Local Management
•
Remote Management
•
System Log
•
Monitor the Internet Traffic Statistics
•
CWMP Settings
•
SNMP Settings
Page 89 / 119
85
Chapter 13
Administrate Your Network
13° 1°
Set System Time and Region
System time is the time displayed while the modem router is running. The system time
you configure here will be used for other time-based functions like Parental Controls
and Wireless Schedule. You can manually set how to get the system time.
Follow the steps below to set your system time.
1°
Visit
http://tplinkmodem.net
, and log in with the password you set for the modem
router.
2°
Go to
Advanced
>
System Tools
>
Time Settings
page.
3°
Select your
Region
from the drop-down list. The region is where the wireless
function of the device can be used. It may be illegal to use the wireless function
of the device in a region other than regions specified in the list. If your country or
region is not listed, please contact your local government agency for assistance.
4°
Configure the system time using the following methods :
Manually:
Select your time zone and enter your local time.
Get from PC:
Click this button if you want to use the current managing PC’s time.
Get GMT:
Click this button if you want to get time from the Internet. Make sure your
modem router can access the Internet before you select this way to get system
time.
5°
Click
Save
to make your settings effective.
6°
After setting the system time, you can set
Daylight Saving
time according to your
needs. Tick the checkbox to enable
Daylight Saving
, set the start and end time and
then click
Save
to make the settings effective.
Page 90 / 119
86
Chapter 13
Administrate Your Network
13° 2°
Update the Firmware
TP-LINK is dedicated to improving and enriching the product features, giving you a
better network experience. We will release the latest firmware at TP-LINK official
website, you can download the latest firmware file from our website:
www.tp-link.com
and upgrade the firmware to the latest version.
Follow the steps below to update your firmware to the latest.
1°
Download the latest firmware file from our website:
www.tp-link.com
.
2°
Visit
http://tplinkmodem.net
, and log in with the password you set for the modem
router.
3°
Go to
Advanced
>
System Tools
>
Firmware Upgrade
page.
4°
Click
Browse
to locate the downloaded new firmware file, and click
Upgrade
.
5°
Wait for the upgrading and then the modem router will automatically reboot.
Note:
1. Before upgrading the firmware, it’s better to back up your current settings. For more details, refer to
Back up and
Restore Configuration Settings
.
2. During the upgrading process, do not turn off or reset the router.
3. The upgraded firmware version must correspond to the hardware.

Rate

4.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top