1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. Archer C9
    5. /
  5. 20
Page 96 / 143 Scroll up to view Page 91 - 95
Archer C9
AC1900 Wireless Dual Band Gigabit Router
Target
- In this filed, select a target from the drop-down list for the rule.
Schedule
- In this field, select a schedule from the drop-down list for the rule.
Status
- In this field, there are two options,
Enabled
or
Disabled
. Select
Enabled
so
that the rule will take effect. Select
Disabled
so that the rule won't take effect.
5.
Click
Finish
to complete adding a new rule.
Method Two:
1.
Click the
Add New…
button and the next screen will pop up as shown in Figure 5-70.
2.
Give a name (e.g. Rule_1) for the rule in the
Rule Name
field.
3.
Select a host from the
Host
drop-down list or choose “
Click Here To Add New Host List
”.
4.
Select a target from the
Target
drop-sown list or choose “
Click Here To Add New Target
List
”.
5.
Select a schedule from the
Schedule
drop-down list or choose “
Click Here To Add New
Schedule
”.
6.
In the
Status
field, select
Enabled
or
Disabled
to enable or disable your entry.
7.
Click the
Save
button.
Figure 5-70 Add Internet Access Control Entry
For example
: If you desire to allow the host with MAC address 00-11-22-33-44-AA to access
www.google.com only from 18:00 to 20:00 on Saturday and Sunday, and forbid other hosts in the
LAN to access the Internet, you should follow the settings below:
1.
Click the menu
Access Control
on the left. Select
Enable Internet Access Control
and
choose "
Allow the packets specified by any enabled access control policy to pass
through the router
".
2.
Click
Setup Wizard
button.
3.
Add a new host with the Host Description is Host_1 and MAC Address is 00-11-22-33-44-AA,
and click
Next
.
- 85 -
Page 97 / 143
Archer C9
AC1900 Wireless Dual Band Gigabit Router
4.
Add a new target with the Target Description is Target_1 and Domain Name is
www.google.com, and click
Next
.
5.
Add a new schedule with the Schedule Description is Schedule_1, Day is Sat and Sun, Start
Time is 1800 and Stop Time is 2000, and click
Next
.
6.
Add a new rule with the Rule Description is Rule_1, Host is Host_1, Target is Target_1,
Schedule is Schedule_1, Status is Enabled, and click
Finish
.
Then you will go back to the Access Control Rule Management page and see the following list.
5.13.2
Host
Choose menu “
Advanced
→
Access Control
→
Host
”, and then you can view and set a Host list in
the screen as shown in Figure 5-71. The host list is necessary for the Access Control Rule.
Figure 5-71 Host Settings
Host Description -
Displays the description of the host and this description is unique.
Information -
Displays the information about the host. It can be IP or MAC.
Modify -
To modify or delete an existing entry.
To add a new entry, please follow the steps below.
1.
Click the
Add New…
button.
2.
In the
Mode
field, select IP Address or MAC Address.
1)
If you select IP Address, the screen is shown as Figure 5-72.
In
Host Description
field, create a unique description for the host, e.g. Host_1.
In
LAN IP Address
field, enter the IP address.
- 86 -
Page 98 / 143
Archer C9
AC1900 Wireless Dual Band Gigabit Router
Figure 5-72 Add or Modify a Host Entry
2)
If you select MAC Address, the screen is shown as Figure 5-73.
In
Host Description
field, create a unique description for the host, e.g. Host_1.
In
MAC Address
field, enter the MAC address.
Figure 5-73 Add or Modify a Host Entry
3.
Click the
Save
button to complete the settings.
Click the
Delete All
button to delete all the entries in the table.
Click the
Next
button to go to the next page, or click the
Previous
button to return to the previous
page.
For example
: If you desire to restrict the internet activities of host with MAC address
00-11-22-33-44-AA, you should first follow the settings below:
1.
Click
Add New...
button in Figure 5-71 to enter the Add or Modify a Host Entry page.
2.
In
Mode
field, select MAC Address from the drop-down list.
3.
In
Host Description
field, create a
unique
description for the host (e.g. Host_1).
4.
In
MAC Address
field, enter 00-11-22-33-44-AA.
5.
Click
Save
to complete the settings.
Then you will go back to the Host Settings page and see the following list.
- 87 -
Page 99 / 143
Archer C9
AC1900 Wireless Dual Band Gigabit Router
5.13.3
Target
Choose menu “
Advanced
→
Access Control
→
Target
”, and then you can view and set a Target
list in the screen as shown in Figure 5-74. The target list is necessary for the Access Control Rule.
Figure 5-74 Target Settings
Target Description -
Displays the description about the target and this description is unique.
Information -
The target can be IP address, port, or domain name.
Modify -
To modify or delete an existing entry.
To add a new entry, please follow the steps below.
1.
Click the
Add New…
button.
2.
In Mode field, select
IP Address
or
Domain Name
.
3.
If you select
IP Address
, the screen is shown as Figure 5-75.
Figure 5-75 Add or Modify an Access Target Entry
1)
In
Target Description
field, create a unique description for the target, e.g. Target_1.
2)
In
IP Address
field, enter the IP address of the target.
3)
Select a common service from
Common Service Port
drop-down list, so that the
Target
Port
will be automatically filled. If the
Common Service Port
drop-down list doesn’t
have the service you want, specify the
Target Port
manually.
4)
In
Protocol
field, select TCP, UDP, ICMP or ALL from the drop-down list.
4.
If you select
Domain Name
, the screen is shown as Figure 5-76.
- 88 -
Page 100 / 143
Archer C9
AC1900 Wireless Dual Band Gigabit Router
Figure 5-76 Add or Modify an Access Target Entry
1)
In
Target Description
field, create a unique description for the target, e.g. Target_1.
2)
In
Domain Name
field, enter the domain name, either the full name or the keywords (e.g.
google) in the blank. Any domain name with keywords in it (www.google.com,
www.google.cn) will be blocked or allowed. You can enter 4 domain names.
5.
Click the
Save
button.
Click the
Delete All
button to delete all the entries in the table.
Click the
Next
button to go to the next page, or click the
Previous
button to return to the previous
page.
For example
: If you desire to restrict the internet activities of host with MAC address
00-11-22-33-44-AA in the LAN to access
www.google.com
only, you should first follow the
settings below:
1.
Click
Add New…
button in Figure 5-74.
2.
In
Mode
field, select Domain Name from the drop-down list.
3.
In
Target Description
field, create a unique description for the target, e.g. Target_1.
4.
In
Domain Name
field, enter www.google.com.
5.
Click
Save
to complete the settings.
Then you will go back to the Target Settings page and see the following list.
5.13.4
Schedule
Choose menu “
Advanced
→
Access Control
→
Schedule
”, and then you can view and set a
schedule in the next screen as shown in Figure 5-77. The schedule is necessary for the Access
Control Rule.
- 89 -

Rate

3.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top