Page 21 / 143
Scroll up to view Page 16 - 20
Archer C8
AC1750 Wireless Dual Band Gigabit Router
- 10 -
4.
Then
WAN Connection Type
page will appear as shown below. Select your connection type
if you know what it is or click
Auto Detect
button; then follow the instructions to continue.
Note:
1)
It's likely that you will skip Step 3 and jump to Step 4 in some situations, which is normal.
2)
Make sure the cable is securely plugged into the Internet port before using
Auto-Detect
.
3)
Auto-Detect
supports only three popular connection types, PPPoE, Dynamic IP, and
Static IP. If your connection type is L2TP or PPTP, you need to manually select the very
type and click
Next
to go on configuring.
Figure 3-4 WAN Connection Type
Dynamic IP
Choose to clone MAC address or not and then click
Next
to continue.
Figure 3-5 WAN Connection Type
Page 22 / 143
Archer C8
AC1750 Wireless Dual Band Gigabit Router
- 11 -
Static IP
Figure 3-6 WAN Connection Type
IP Address -
Enter the IP address into this field.
Subnet Mask -
Enter the subnet mask into this field. It is usually 255.255.255.0.
Default Gateway -
Enter the gateway IP address into this field.
Primary
DNS -
Enter the DNS Server IP address into this field.
Secondary DNS (Optional) -
If your ISP provides another DNS server IP address, enter it
into this field.
PPPoE/Russian PPPoE
Figure 3-7 WAN Connection Type
Username -
Enter the username provided by your ISP. This field is case-sensitive.
Password -
Enter the password provided by your ISP. This field is case-sensitive.
Page 23 / 143
Archer C8
AC1750 Wireless Dual Band Gigabit Router
- 12 -
L2TP
Figure 3-8 WAN Connection Type
Server IP Address/Name
- Enter the server IP address/name provided by your ISP.
User Name -
Enter the username provided by your ISP. This field is case-sensitive.
Password -
Enter the Password provided by your ISP. This field is case-sensitive.
Dynamic IP/Static IP -
Select Static IP if the IP Address, Subnet Mask, Default Gateway,
and Primary DNS server address have been provided by your ISP. Otherwise, please select
Dynamic IP.
IP Address -
Enter the IP address provided by your ISP.
Subnet Mask -
Enter the subnet mask provided by your ISP.
Default Gateway-
Enter the default gateway provided by your ISP.
Primary DNS -
Enter the primary DNS provided by your ISP.
Page 24 / 143
Archer C8
AC1750 Wireless Dual Band Gigabit Router
- 13 -
PPTP
Figure 3-9 WAN Connection Type
Server IP Address/Name
- Enter the server IP address/name provided by your ISP.
User Name -
Enter the username provided by your ISP. This field is case-sensitive.
Password -
Enter the Password provided by your ISP. This field is case-sensitive.
Dynamic IP/Static IP -
Select Static IP if the IP Address, Subnet Mask, Default Gateway,
and Primary DNS server address have been provided by your ISP. Otherwise, please select
Dynamic IP.
IP Address -
Enter the IP address provided by your ISP.
Subnet Mask -
Enter the subnet mask provided by your ISP.
Default Gateway-
Enter the default gateway provided by your ISP.
Primary DNS -
Enter the primary DNS provided by your ISP.
5.
After finishing WAN Connection Type selection, you need to configure the basic parameters
for your wireless network, including 2.4GHz and 5GHz, and then click
Next
.
Figure 3-10 WAN Connection Type
Page 25 / 143
Archer C8
AC1750 Wireless Dual Band Gigabit Router
- 14 -
Wireless 2.4GHz/5GHz -
Displays whether the wireless function is enabled or not.
Network Name (SSID) -
Also called the
SSID (Service Set Identification). Enter a value of up
to 32 characters. The same name must be assigned to all wireless devices in your network.
This value is case-sensitive. For example,
TEST
is NOT the same as
test
.
Password -
Create a password for your 2.4GHz and 5GHz wireless network.
19216811.live