TP-Link Archer C7 Router Manual PDF (Setup & Configuration Guide)

Page 136 / 146 Scroll up to view Page 131 - 135

Archer C7

AC1750 Wireless Dual Band Gigabit Router

- 126 -

Statistics Table:

IP/MAC Address

The IP and MAC address are displayed with related statistics.

Total

Packets

The total number of packets received and transmitted by the

router.

Bytes

The total number of bytes received and transmitted by the router.

Current

Packets

The total number of packets received and transmitted in the last

Packets Statistic interval seconds.

Bytes

The total number of bytes received and transmitted in the last

Packets Statistic interval seconds.

ICMP

Tx

The number of the ICMP packets transmitted to WAN per second

at the specified Packets Statistics interval. It is shown like

“current transmitting rate / Max transmitting rate”.

UDP Tx

The number of UDP packets transmitted to the WAN per second

at the specified Packets Statistics interval. It is shown like

“current transmitting rate / Max transmitting rate”.

TCP

SYN Tx

The number of TCP SYN packets transmitted to the WAN per

second at the specified Packets Statistics interval. It is shown like

“current transmitting rate / Max transmitting rate”.

Modify

Reset

Reset the value of he entry to zero.

Delete

Delete the existing entry in the table.

There would be 5 entries on each page. Click

the next page.

Page 137 / 146

Archer C7

AC1750 Wireless Dual Band Gigabit Router

- 127 -

Appendix A: FAQ

1.

How do I configure the router to access Internet by ADSL users?

1)

First, configure the ADSL Modem configured in RFC1483 bridge model.

2)

Connect the Ethernet cable from your ADSL Modem to the Internet port on the router.

The telephone cord plugs into the Line port of the ADSL Modem.

3)

Login to the router, click the “Network” menu on the left of your browser, and click "WAN"

submenu. On the WAN page, select “PPPoE/Russia PPPoE” for WAN Connection Type.

Type user name in the “User Name” field and password in the “Password” field, type

password in the “Confirm Password” field again, finish by clicking “Connect”.

Figure A-1 PPPoE Connection Type

4)

If your ADSL lease is in “pay-according-time” mode, select “Connect on Demand” or

“Connect Manually” for Internet connection mode. Type an appropriate number for “Max

Idle Time” to avoid wasting paid time. Otherwise, you can select “Auto-connecting” for

Internet connection mode.

Figure A-2 PPPoE Connection Mode



Note:

1.

Sometimes the connection cannot be disconnected although you specify a time to Max

Idle Time, since some applications is visiting the Internet continually in the background.

2.

If you are a Cable user, please configure the router following the above steps.

Page 138 / 146

Archer C7

AC1750 Wireless Dual Band Gigabit Router

- 128 -

2.

How do I configure the router to access Internet by Ethernet users?

1)

Login to the router, click the “Network” menu on the left of your browser, and click "WAN"

submenu. On the WAN page, select “Dynamic IP” for "WAN Connection Type", finish by

clicking “Save”.

2)

Some ISPs require that you register the MAC Address of your adapter, which is

connected to your cable/DSL Modem during installation. If your ISP requires MAC

register, login to the router and click the "Network" menu link on the left of your browser,

and then click "MAC Clone" submenu link. On the "MAC Clone" page, if your PC’s MAC

address is proper MAC address, click the "Clone MAC Address" button and your PC’s

MAC address will fill in the "WAN MAC Address" field. Or else, type the MAC Address

into the "WAN MAC Address" field. The format for the MAC Address is

XX-XX-XX-XX-XX-XX. Then click the "Save" button. It will take effect after rebooting.

Figure A-3 MAC Clone

3.

I want to use Netmeeting, what do I need to do?

1)

If you start Netmeeting as a host, you don’t need to do anything with the router.

2)

If you start as a response, you need to configure Virtual Server or DMZ Host and make

sure the H323 ALG is enabled.

3)

How to configure Virtual Server: Log in to the router, click the “

Forwarding

” menu on the

left of your browser, and click "

Virtual Servers

" submenu. On the "

Virtual Servers

"

page, click

Add New…

. Then on the “

Add or Modify a Virtual Server Entry

” page,

enter “1720” for the “Service Port” blank, and your IP address for the “IP Address” blank,

taking 192.168.0.169 for an example, remember to

Enable

and

Save

.

Figure A-4 Virtual Servers

Page 139 / 146

Archer C7

AC1750 Wireless Dual Band Gigabit Router

- 129 -

Figure A-5 Add or Modify a Virtual server Entry



Note:

Your opposite side should call your WAN IP, which is displayed on the “Status” page.

4)

How to enable DMZ Host: Log in to the router, click the “

Forwarding

” menu on the left of

your browser, and click "

DMZ

" submenu. On the "DMZ" page, click

Enable

radio button

and type your IP address into the “DMZ Host IP Address” field, using 192.168.0.169 as

an example, remember to click the

Save

button.

Figure A-6 DMZ

5)

How to enable H323 ALG: Log in to the router, click the “

Security

” menu on the left of

your browser, and click “

Basic Security

” submenu. On the “

Basic Security

” page,

check the

Enable

radio button next to

H323 ALG

. Remember to click the

Save

button.

Page 140 / 146

Archer C7

AC1750 Wireless Dual Band Gigabit Router

- 130 -

Figure A-7 Basic Security

4.

I want to build a WEB Server on the LAN, what should I do?

1)

Because the WEB Server port 80 will interfere with the WEB management port 80 on the

router, you must change the WEB management port number to avoid interference.

2)

To change the WEB management port number: Log in to the router, click the “

Security

”

menu on the left of your browser, and click "

Remote Management

" submenu. On the

"

Remote Management

" page, type a port number except 80, such as 88, into the "Web

Management Port" field. Click

Save

and reboot the router.

Figure A-8 Remote Management



Note:

If the above configuration takes effect, you can visit and configure the router by typing

http://192.168.0.1:88

(the router’s LAN IP address: Web Management Port) in the address

Rate

Popular TP-Link Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share