Page 111 / 146
Scroll up to view Page 106 - 110
Archer C7
AC1750 Wireless Dual Band Gigabit Router
- 101 -
Figure 4-98 System Routing Table
Destination Network
- The Destination Network is the address of the network or host to
which the static route is assigned.
Subnet Mask
- The Subnet Mask determines which portion of an IP address is the network
portion, and which portion is the host portion.
Gateway
- This is the IP address of the gateway device that allows for contact between the
router and the network or host.
Interface
- This interface tells you either the Destination IP Address is on the
LAN & WLAN
(internal wired and wireless networks), or on the
WAN
(Internet).
4.17 Bandwidth Control
Figure 4-99 Bandwidth Control
There are two submenus under the Bandwidth Control menu as shown in Figure 4-99:
Control
Settings
and
Rules List
. Click any of them, and you will be able to configure the corresponding
function. The detailed explanations for each submenu are provided below.
4.17.1
Control Settings
Choose menu “
Bandwidth Control
→
Control Settings
”, and then you can configure the
Egress Bandwidth and Ingress Bandwidth in the next screen. Their values you configure should
be less than 100000Kbps. For optimal control of the bandwidth, please select the right Line Type
and ask your ISP for the total bandwidth of the egress and ingress.
Page 112 / 146
Archer C7
AC1750 Wireless Dual Band Gigabit Router
- 102 -
Figure 4-100 Bandwidth Control Settings
Enable Bandwidth Control -
Check this box so that the Bandwidth Control settings can take
effect.
Line Type
-
Select the right type for you network connection. If you don’t know how to choose,
please ask your ISP for the information.
Egress Bandwidth
- The upload speed through the Internet port
.
Ingress Bandwidth -
The download speed through the Internet port.
4.17.2
Rules List
Choose menu “
Bandwidth Control
→
Rules List
”, and then you can view and configure the
Bandwidth Control rules in the screen below.
Figure 4-101 Bandwidth Control Rules List
Description
-
This is the information about the rules such as address range.
Egress bandwidth -
This field displays the max and mix upload bandwidth through the
Internet port, the default is 0.
Ingress bandwidth -
This field displays the max and mix download bandwidth through the
Internet port, the default is 0.
Enable -
This displays the status of the rule.
Modify -
Click
Modify
to edit the rule. Click
Delete
to delete the rule.
Page 113 / 146
Archer C7
AC1750 Wireless Dual Band Gigabit Router
- 103 -
To add/modify a Bandwidth Control rule, follow the steps below.
1.
Click
Add New…
shown in Figure 4-101, you will see a new screen shown in Figure 4-102.
2.
Enter the information like the screen shown below.
Figure 4-102 Bandwidth Control Rule Settings
3.
Click the
Save
button.
4.18 IP & MAC Binding
Figure 4-103 the IP & MAC Binding menu
There are two submenus under the IP &MAC Binding menu (shown in Figure 4-103):
Binding
Settings
and
ARP List
. Click any of them, and you will be able to scan or configure the
corresponding function. The detailed explanations for each submenu are provided below.
4.18.1
Binding Settings
This page displays the
IP & MAC Binding Setting
table; you can operate it in accord with your
desire (shown in
Figure 4-104).
Figure 4-104 Binding Setting
Page 114 / 146
Archer C7
AC1750 Wireless Dual Band Gigabit Router
- 104 -
MAC Address
-
The MAC address of the controlled computer in the LAN.
IP Address -
The assigned IP address of the controlled computer in the LAN.
Bind
-
Check this option to enable ARP binding for a specific device.
Modify
-
To modify or delete an existing entry.
When you want to add or modify an IP & MAC Binding entry, you can click the
Add New…
button
or
Modify
button, and then you will go to the next page. This page is used for adding or
modifying an IP & MAC Binding entry
(shown in Figure 4-105).
Figure 4-105 IP & MAC Binding Setting (Add & Modify)
To add IP & MAC Binding entries, follow the steps below.
1.
Click the
Add New...
button as shown in Figure 4-104.
2.
Enter the MAC Address and IP Address.
3.
Select the Bind checkbox.
4.
Click the
Save
button to save it.
To modify or delete an existing entry, follow the steps below.
1.
Find the desired entry in the table.
2.
Click
Modify
or
Delete
as desired on the
Modify
column.
To find an existing entry, follow the steps below.
1.
Click the
Find
button as shown in Figure 4-104.
2.
Enter the MAC Address or IP Address.
3.
Click the
Find
button in the page as shown in Figure 4-106.
Page 115 / 146
Archer C7
AC1750 Wireless Dual Band Gigabit Router
- 105 -
Figure 4-106 Find IP & MAC Binding Entry
Click the
Enable All
button to make all entries enabled.
Click the
Delete All
button to delete all entries.
4.18.2
ARP List
To manage the computer, you could observe the computers in the LAN by checking the
relationship of MAC address and IP address on the ARP list, and you could also configure the
items on the ARP list. This page displays the ARP List; it shows all the existing IP & MAC Binding
entries (shown in Figure 4-107).
Figure 4-107 ARP List
1.
MAC Address
-
The MAC address of the controlled computer in the LAN.
2.
IP Address
-
The assigned IP address of the controlled computer in the LAN.
3.
Status
-
Indicates whether or not the MAC and IP addresses are bound.
4.
Configure
-
Load or delete an item.
Load
-
Load the item to the IP & MAC Binding list.
Delete
-
Delete the item.
Click the
Bind All
button to bind all the current items, available after enable.
Click the
Load All
button to load all items to the IP & MAC Binding list.
Click the
Refresh
button to refresh all items.
Note:
An item could not be loaded to the IP & MAC Binding list if the IP address of the item has been
loaded before. Error warning will prompt as well. Likewise, "Load All" only loads the items without
interference to the IP & MAC Binding list.
19216811.live