1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. Archer C20
    5. /
  5. 27
Page 131 / 144 Scroll up to view Page 126 - 130
Archer C20
AC750 Wireless Dual Band Router
- 119 -
Note:
The new user name and password must not exceed 14 characters in length and not include any
spaces. Enter the new Password twice to confirm it.
Click the
Save
button when finished.
Click the
Clear All
button to clear all.
4.21.8
System Log
Choose menu “
System Tools
→
System Log
”, and then you can view the logs of the router.
Log Type -
By selecting the log type, only logs of this type will be shown.
Log Level -
By selecting the log level, only logs of this level will be shown.
Refresh -
Refresh the page to show the latest log list.
Clear Log -
All the logs will be deleted from the router permanently, not just from the page.
Save Log -
Click to save all the logs in a txt file.
Log Settings -
Click to change the log settings
.
4.21.9
Statistics
Choose menu “
System Tools
→
Statistics
”, and then you can view the statistics of the router,
including total traffic and current traffic of the last Packets Statistic Interval.
Page 132 / 144
Archer C20
AC750 Wireless Dual Band Router
- 120 -
Figure 4-118 Statistics
Statistics Status -
Enable or Disable. The default value is disabled. To enable it, click the
Enable
button. If it is disabled, the function of DoS protection in Security settings will be
disabled.
Statistics Interval
（
5-60
）
-
The default value is 10. Select a value between 5 and 60
seconds in the drop-down list. The Packets Statistic interval indicates the time section of the
packets statistic.
Click
Reset
All
to reset the values of all the entries to zero.
Click
Delete
All
to delete all entries in the table.
Click the
Refresh
button to refresh immediately.
Page 133 / 144
Archer C20
AC750 Wireless Dual Band Router
- 121 -
Statistics Table:
IP/MAC Address
The IP and MAC address are displayed with related statistics.
Total
Packets
The total number of packets received and transmitted by the
router.
Bytes
The total number of bytes received and transmitted by the router.
Current
Packets
The total number of packets received and transmitted in the last
Packets Statistic interval seconds.
Bytes
The total number of bytes received and transmitted in the last
Packets Statistic interval seconds.
ICMP
Tx
The number of the ICMP packets transmitted to WAN per second
at the specified Packets Statistics interval. It is shown like
“current transmitting rate / Max transmitting rate”.
UDP Tx
The number of UDP packets transmitted to the WAN per second
at the specified Packets Statistics interval. It is shown like
“current transmitting rate / Max transmitting rate”.
TCP
SYN Tx
The number of TCP SYN packets transmitted to the WAN per
second at the specified Packets Statistics interval. It is shown like
“current transmitting rate / Max transmitting rate”.
Operation
Reset
Reset the value of he entry to zero.
Delete
Delete the existing entry in the table.
There would be 5 entries on each page. Click
Previous
to return to the previous page and
Next
to
the next page.
Page 134 / 144
Archer C20
AC750 Wireless Dual Band Router
- 122 -
4.22 Logout
Choose ”
Logout
”, and you will be back to the login screen as shown in Figure 4-119.
Figure 4-119 Logout
Page 135 / 144
Archer C20
AC750 Wireless Dual Band Router
- 123 -
Appendix A: FAQ
1.
How do I configure the router to access Internet by ADSL users?
1)
First, configure the ADSL Modem configured in RFC1483 bridge model.
2)
Connect the Ethernet cable from your ADSL Modem to the Internet port on the router.
The telephone cord plugs into the Line port of the ADSL Modem.
3)
Login to the router, click the “Network” menu on the left of your browser, and click "WAN"
submenu. On the WAN page, select “PPPoE/Russia PPPoE” for WAN Connection Type.
Type user name in the “User Name” field and password in the “Password” field, type
password in the “Confirm Password” field again, finish by clicking “Connect”.
Figure A-1 PPPoE Connection Type
4)
If your ADSL lease is in “pay-according-time” mode, select “Connect on demand” or
“Connect manually” for Internet connection mode. Type an appropriate number for “Max
Idle Time” to avoid wasting paid time. Otherwise, you can select “Always on” for Internet
connection mode.
Figure A-2 PPPoE Connection Mode
Note:
1.
Sometimes the connection cannot be disconnected although you specify a time to Max
Idle Time, since some applications is visiting the Internet continually in the background.
2.
If you are a Cable user, please configure the router following the above steps.

Rate

4 / 5 based on 1 vote.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top