1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. Archer C20
    5. /
  5. 21
Page 101 / 144 Scroll up to view Page 96 - 100
Archer C20
AC750 Wireless Dual Band Router
- 89 -
There are four submenus under the Access Control menu:
Rule
,
Host
,
Target
and
Schedule
(as
shown in Figure 4-75). Click any of them, and you will be able to configure the corresponding
function.
4.15.1
Rule
Choose menu “
Access Control
→
Rule
”, and then you can view and set Access Control rules in
the screen as shown in Figure 4-76.
Figure 4-76 Access Control Rule Management
Enable Internet Access Control -
Select the check box to enable the Internet Access
Control function, so the Default Filter Policy can take effect.
Description -
Here displays the name of the rule and this name is unique.
LAN Host -
Here displays the host selected in the corresponding rule.
Target -
Here displays the target selected in the corresponding rule.
Schedule -
Here displays the schedule selected in the corresponding rule.
Enable -
Here displays the status of the rule, enabled or not. Check this option to enable a
specific entry.
Edit -
Here you can edit or delete an existing rule.
Add New -
Click the
Add New
button to add a new rule entry.
Enable Selected -
Click the
Enable Selected
button to enable selected rules in the list.
Disable Selected -
Click the
Disable Selected
button to disable selected rules in the list.
Page 102 / 144
Archer C20
AC750 Wireless Dual Band Router
- 90 -
Delete Selected -
Click the
Delete Selected
button to delete selected entries in the table.
How to add a new rule:
1.
Click the
Add New
button and the next screen will pop up as shown in Figure 4-77.
2.
Give a name (e.g. Rule_1) for the rule in the
Description
field.
3.
Select a host from the
LAN
Host
drop-down list or click “
Add LAN Host
”.
4.
Select a target from the
Target
drop-sown list or click “
Add Target
”.
5.
Select a schedule from the
Schedule
drop-down list or click “
Add Schedule
”.
6.
In the
Status
field, select
Enabled
or
Disabled
to enable or disable your entry.
7.
In the
Direction
field, select
IN
or
OUT
.
8.
Select a schedule from the
Protocol
drop-down list.
9.
Click the
Save
button.
Figure 4-77 Add Internet Access Control Entry
For example
: If you desire to allow the host with MAC address 00 : 11 : 22 : 33 : 44 : AA to access
www.google.com only from 18:00 to 20:00 on Saturday and Sunday, and forbid other hosts in the
LAN to access the Internet, you should follow the settings below:
1.
Click the submenu
Rule of Access Control
in the left to return to the Rule List page. Select
Enable Internet Access Control
and choose "
Allow the packets specified by any
enabled access control policy to pass through the router
".
2.
We recommend that you click
Add New
button to finish all the following settings.
3.
Click the submenu
Host of Access Control
in the left to enter the Host List page. Add a new
entry with the Host Description is Host_1 and MAC Address is 00:11:22:33:44:AA.
Page 103 / 144
Archer C20
AC750 Wireless Dual Band Router
- 91 -
4.
Click the submenu
Target of Access Control
in the left to enter the Target List page. Add a
new entry with the Target Description is Target_1 and Domain Name is www.google.com.
5.
Click the submenu
Schedule of Access Control
in the left to enter the Schedule List page.
Add a new entry with the Schedule Description is Schedule_1, Day is Sat and Sun, Start
Time is 1800 and Stop Time is 2000.
6.
Click the submenu
Rule of Access Control
in the left, Click
Add New
button to add a new
rule as follows:
1)
In Rule Name field, create a name for the rule. Note that this name should be unique, for
example Rule_1.
2)
In Host field, select Host_1.
3)
In Target field, select Target_1.
4)
In Schedule field, select Schedule_1.
5)
In Status field, select
Enabled
.
6)
Click
Save
to complete the settings.
Then you will go back to the Access Control Rule Management page and see the following list.
4.15.2
Host
Choose menu “
Access Control
→
Host
”, and then you can view and set a Host list in the
screen as shown in Figure 4-78. The host list is necessary for the Access Control Rule.
Figure 4-78 Host Settings
Description -
Here displays the description of the host and this description is unique.
Address Info -
Here displays the information about the host. It can be IP or MAC.
Page 104 / 144
Archer C20
AC750 Wireless Dual Band Router
- 92 -
Edit -
To modify or delete an existing entry.
Click the
Delete Selected
button to delete the selected entries in the table.
To add a new entry, please follow the steps below.
1.
Click the
Add New
button.
2.
In the
Mode
field, select IP Address or MAC Address.
1)
If you select IP Address, the screen shown is Figure 4-79.
In
Description
field, create a unique description for the host (e.g. Host_1).
In
IP Address
field, enter the IP address.
2)
If you select MAC Address, the screen shown is Figure 4-80.
In
Description
field, create a unique description for the host (e.g. Host_1).
In
MAC Address
field, enter the MAC address.
3.
Click the
Save
button to complete the settings.
Figure 4-79 Add or Modify a Host Entry
Figure 4-80 Add or Modify a Host Entry
For example
: If you desire to restrict the internet activities of host with MAC address
00:11:22:33:44:AA, you should first follow the settings below:
1.
Click
Add New
button in Figure 4-78 to enter the Add or Modify a Host Entry page.
2.
In
Mode
field, select MAC Address from the drop-down list.
3.
In
Description
field, create a
unique
description for the host (e.g. Host_1).
Page 105 / 144
Archer C20
AC750 Wireless Dual Band Router
- 93 -
4.
In
MAC Address
field, enter 00:11:22:33:44:AA.
5.
Click
Save
to complete the settings.
Then you will go back to the Host Settings page and see the following list.
4.15.3
Target
Choose menu “
Access Control
→
Target
”, and then you can view and set a Target list in the
screen as shown in Figure 4-81. The target list is necessary for the Access Control Rule.
Figure 4-81 Target Settings
Description -
Here displays the description about the target and this description is unique.
Details -
The target can be IP address, port, or domain name.
Edit-
To modify or delete an existing entry.
To add a new entry, please follow the steps below.
1.
Click the
Add New
button.
2.
In Mode field, select
IP Address
,
MAC Address
or
URL Address
.
1
）
If you select
IP Address
, the screen shown is Figure 4-82.
Figure 4-82 Add or Modify an Access Target Entry
I)
In
Description
field, create a unique description for the target (e.g. Target_1).

Rate

4 / 5 based on 1 vote.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top