1. Home
    2. /
  2. Manuals
    3. /
  3. TP-Link
    4. /
  4. Archer C2
    5. /
  5. 16
Page 76 / 143 Scroll up to view Page 71 - 75
Archer C2
AC750 Wireless Dual Band Gigabit Router
- 66 -
4.10 USB Settings
Figure 4-49 The USB Settings menu
There are six submenus under the USB Settings menu (shown in Figure 4-49):
USB Mass
Storage
,
User Accounts
,
Storage Sharing
,
FTP Server
,
Media Server
and
Print Server
and.
Click any of them, and you will be able to configure the corresponding functions.
4.10.1
USB Mass Storagre
The
USB Mass Storage
page provides the basic information about the USB mass storage device.
Click
the
Refresh
button to update this page.
Figure 4-50 User Account Management
4.10.2
User Accounts
You can specify the user name and password for Storage Sharing and FTP Server users on this
page. Storage Sharing users can use Internet Explorer to access files on the USB drive. FTP
Server users can log into the FTP Server via FTP Client.
The default user account is
admin
. It has read/write access to Storage Sharing and can access
FTP Server.
Page 77 / 143
Archer C2
AC750 Wireless Dual Band Gigabit Router
- 67 -
Figure 4-51 User Account Management
Only Administrator can use a Web browser to transfer the files from a PC to the Writable shared
volume on the USB drive.
To add a new user account, please follow the steps below:
1.
Choose the
Index
from the drop-down list..
2.
Self-define a
User Name
.
3.
Enter the password in the
Password
field.
4.
Re-enter the password in the
Confirm Password
field.
5.
Click
Set
to make your settings take effect.
New Username -
Type the user name that you want to give access to the USB drive. The
user name must be composed of alphanumeric symbols not exceeding 15 characters in
length.
New Password -
Enter the password in the Password field. The password must be
composed of alphanumeric symbols not exceeding 15 characters in length. For security
purposes, the password for each user account is not displayed.
Confirm Password -
Re-enter the password here.
Note:
Page 78 / 143
Archer C2
AC750 Wireless Dual Band Gigabit Router
- 68 -
1.
Please restart the service for the new settings to take effect.
2.
If you cannot use the new user name and password to access the shares, press
Windows
logo + R
to open the Run dialog box and type
net use
\\192.168.1.1 /delete /yes
and press
Enter. (192.168.1.1 is your router's LAN IP address. If the LAN IP of the modem connected
with your router is 192.168.1.x, the default LAN IP of the router will automatically switch from
192.168.1.1 to 192.168.0.1 to avoid IP conflict; in this case, please try
net use
\\192.168.0.1
/delete / yes
.)
4.10.3
Storage Sharing
Choose menu “
USB Settings
→
Storage Sharing
”, you can configure a USB disk drive attached
to the router and view volume and share such properties as share name, directory, user access,
and status on this page as shown below.
Figure 4-52 Storage Sharing
Server Status -
Indicates the Storage Sharing server's current status. You can click the
Enable
button to start the Storage Sharing service and click the
Disable
button to stop it.
Anonymous access to all volumes –
Check this box to allow users to access to all
volumes without username or password
Shared Name -
The volume name of the USB drive the users have access to.
Directory -
The directory of the shared folder.
User Access –
Indicates user access of the shared folder. F stands for fully access, R
stands for read-only and N stands for no-access.
Page 79 / 143
Archer C2
AC750 Wireless Dual Band Gigabit Router
- 69 -
Status -
Indicates the shared or non-shared status of the volume.
Edit –
Click
Edit
to edit the entry.
To add a new folder, follow the instructions below.
1.
Click
Add New Folder
in Figure 4-52.
Figure 4-53 Add or Modify Share Folder
2.
Enter display name of the share folder in
Shared Name
filed.
3.
Click the
Browse
button to select the folder which you want to share.
4.
Click the
Apply
button to save the settings.
Note:
1.
The max share folders number is 10. If you want to share a new folder when the number has
reached 10, you can delete an existing share folder and then add a new one.
2.
If you want to change the FTP settings, you need to restart FTP Server to make the changes
take effect.
Click the
Enable Selected
button to make the selected entries enabled
Click the
Disable Selected
button to make the selected entries disabled.
Click the
Delete Selected
button to delete the selected entries.
Click the
Apply
button to make the settings take effect.
Page 80 / 143
Archer C2
AC750 Wireless Dual Band Gigabit Router
- 70 -
4.10.4
FTP Server
Choose menu “
USB Settings
→
FTP Server
”, you can create an FTP server that can be accessed
from the Internet or your local network.
Figure 4-54 FTP Server Configuration
Server Status -
Indicates the FTP Server's current status.
Internet Access -
Select enable to allow access of the FTP server from the Internet.
Otherwise, select disable to only allow local network access.
Internet Address
- The WAN IP address of this router,
Service Port -
Enter the FTP Port number to use. The default is 21.
To set up your FTP Server, please follow the instructions below:
1.
Plug an external USB hard disk drive or USB flash drive into this router.
2.
Click the
Enable/Disable
radio box to enable/disable Internet access to FTP from Internet
port.
3.
Specify a port for the FTP server to use (The default port number is 21).
4.
The
Internet Address
displays the WAN IP address of this router, so that other users can
access FTP via this address.
5.
If WAN type is PPPoE/PPTP/L2TP, two connections will be available. Therefore, users can
access FTP server via two connections. Users in a private LAN can access ftp server via
Public Address
while Internet users can access ftp server via
Internet Address
.

Rate

3.5 / 5 based on 2 votes.

Popular TP-Link Models

Famous Router IPs
Famous Router Companies
Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top