Page 21 / 146
Scroll up to view Page 16 - 20
Archer C7
AC1750 Wireless Dual Band Gigabit Router
- 11 -
3.2
Quick Installation Guide
With a Web-based utility, it is easy to configure and manage the AC1750 Wireless Dual Band
Gigabit Router. The Web-based utility can be used on any Windows, Macintosh or UNIX OS with
a Web browser, such as Microsoft Internet Explorer, Mozilla Firefox or Apple Safari.
1.
To access the configuration utility, open a web-browser and type in the default IP address
http://tplinklogin.net
in the address field.
Figure 3-3 Log in the router
After a moment, a login window will appear, similar to Figure 3-4. Enter
admin
for the User
Name and Password, both in lower case letters. Then click the
OK
button or press the
Enter
key.
Figure 3-4 Login Windows
Note:
If the above screen does not pop up, it means that your Web-browser has been set to a proxy.
Go to Tools menu>Internet Options>Connections>LAN Settings, in the screen that appears,
cancel the Using Proxy checkbox, and click OK to finish it.
2.
After successful login, the
Quick Setup
page will appear for you to quickly configure your
router.
Page 22 / 146
Archer C7
AC1750 Wireless Dual Band Gigabit Router
- 12 -
Figure 3-5 Quick Setup
3.
Click
Next
, and then
WAN Connection Type
page will appear, shown in Figure 3-6.
Figure 3-6 WAN Connection Type
The router provides
Auto-Detect
function and supports three popular ways
PPPoE, Dynamic IP
, and
Static IP
and to connect to the Internet. It’s recommended that you make use of the
Auto-Detect
function. If you are sure of what kind of connection type your ISP provides, you can select the very type
and click
Next
to go on configuring.
4.
If you select
Auto-Detect
, the router will automatically detect the connection type your ISP
provides. Make sure the cable is securely plugged into the Internet port before detection. The
appropriate configuration page will be displayed when an active Internet service is
successfully detected by the router.
1)
If the connection type detected is
Dynamic IP
, no configuration is needed for this step.
2) If the connection type detected is
Static IP
, the next screen will appear as shown in
Figure 3-7. Configure the following parameters and then click
Next
to continue.
Page 23 / 146
Archer C7
AC1750 Wireless Dual Band Gigabit Router
- 13 -
Figure 3-7 Quick Setup - Static IP
IP Address -
This is the WAN IP address as seen by external users on the Internet
(including your ISP). Your ISP will provide you with the IP address you need to enter
here. Enter the IP address into the field.
Subnet Mask -
The Subnet Mask is used for the WAN IP address. Your IPS will provide
you with the subnet mask which is usually 255.255.255.0.
Default Gateway -
Your ISP will provide you with the Gateway address which is the ISP
server’s address.
Enter the gateway IP address into the box if required.
Primary
DNS -
Enter the DNS Server IP address into the box if required.
Secondary DNS -
（
Optional
）
If your ISP provides another DNS server, enter it into this
field.
3)
If the connection type detected is
PPPoE/Russian PPPoE
, the next screen will appear as
shown in Figure 3-8. Configure the following parameters and then click
Next
to continue.
Figure 3-8 Quick Setup – PPPoE/Russia PPPoE
User Name
/
Password -
Enter the
User Name
and
Password
provided by your ISP.
These fields are case-sensitive. If you have difficulty with this process, please contact
your ISP.
Page 24 / 146
Archer C7
AC1750 Wireless Dual Band Gigabit Router
- 14 -
Confirm Password -
Enter the password again to make sure that the password is
correct.
Check the radio button of
Dynamic
/
Static IP
to activate the secondary connection if your ISP
provides an extra Connection type such as Dynamic/Static IP to connect to a local area
network.
4) If the connection type detected is
L2TP/ Russian L2TP
, the next screen will appear as
shown in Figure 3-9.Configure the following parameters and then click
Next
to continue.
Figure 3-9 Quick Setup – PPTP/Russia PPTP
User Name
/
Password -
Enter the
User Name
and
Password
provided by your ISP.
These fields are case-sensitive. If you have difficulty with this process, please contact
your ISP.
Select
Static IP
if IP Address/ Subnet Mask/ Gateway and DNS server address have been
provided by your ISP. Then please enter server IP address or domain name provided by your
ISP, and also enter the corresponding parameters.
Select
Dynamic IP
if none of the above parameters are provided. Then you just need to enter
server IP address or domain name provided by your ISP.
Page 25 / 146
Archer C7
AC1750 Wireless Dual Band Gigabit Router
- 15 -
5) If the connection type detected is
PPTP/Russian PPTP
, the next screen will appear as
shown in Figure 3-10. Configure the following parameters and then click
Next
to continue.
Figure 3-10 Quick Setup – L2TP/Russia L2TP
User Name
/
Password -
Enter the
User Name
and
Password
provided by your ISP.
These fields are case-sensitive. If you have difficulty with this process, please contact
your ISP.
Select
Static IP
if IP Address/ Subnet Mask/ Gateway and DNS server address have been
provided by your ISP. Then please enter server IP address or domain name provided by your
ISP, and also enter the corresponding parameters.
Select
Dynamic IP
if none of the above parameters are provided. Then you just need to enter
server IP address or domain name provided by your ISP.
5.
After finishing WAN Connection Type selection, the Dual Band Selection page will appear as
shown in Figure 3-11. Here we take “Concurrently with 2.4GHz and 5GHz (802.11a/b/g/n)” for
example. Click
Next
to continue.
19216811.live