Page 51 / 146 Scroll up to view Page 46 - 50
Archer C7
AC1750 Wireless Dual Band Gigabit Router
- 41 -
Figure 4-22 WPA/WPA2 - Enterprise
Radius Server IP -
Enter the IP address of the Radius server.
Radius Port -
Enter the port number of the Radius server.
Radius Password -
Enter the password for the Radius server.
Group Key Update Period -
Specify the group key update interval in seconds. The value
should be 30 or above. Enter 0 to disable the update.
WEP -
It is based on the IEEE 802.11 standard. If you check this radio button, you will find a
notice in red as show in Figure 4-23.
Figure 4-23 WEP
Type
-
you can choose the type for the WEP security on the drop-down list. The default
setting is
Automatic
, which can select
Shared Key
or
Open System
authentication type
automatically based on the wireless station's capability and request.
WEP Key Format
-
Hexadecimal
and
ASCII
formats are provided here
.
Hexadecimal
format stands for any combination of hexadecimal digits (0-9, a-f, A-F) in the specified
length.
ASCII
format stands for any combination of keyboard characters in the specified
length.
WEP Key
-
Select which of the four keys will be used and enter the matching WEP key that
you create. Make sure these values are identical on all wireless stations in your network.
Page 52 / 146
Archer C7
AC1750 Wireless Dual Band Gigabit Router
- 42 -
Key Type
-
You can select the WEP key length (64-bit, or 128-bit, or 152-bit.) for
encryption. "Disabled" means this WEP key entry is invalid.
64-bit -
You can enter 10 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 5 ASCII characters.
128-bit -
You can enter 26 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 13 ASCII characters.
152-bit -
You can enter 32 hexadecimal digits (any combination of 0-9, a-f, A-F, zero key is
not promoted) or 16 ASCII characters.
Note:
If you do not set the key, the wireless security function is still disabled even if you have
selected Shared Key as Authentication Type.
Be sure to click the
Save
button to save your settings on this page.
4.6.4
Wireless MAC Filtering
Choose menu “
Wireless 2.4GHz
Wireless MAC Filtering
”, you can control the wireless
access by configuring the
Wireless MAC Filtering
function, shown in Figure 4-24.
Figure 4-24 Wireless MAC Filtering
To filter wireless users by MAC Address, click
Enable
. The default setting is
Disabled
.
MAC Address
-
The wireless station's MAC address that you want to filter.
Status
-
The status of this entry, either
Enabled
or
Disabled
.
Description -
A simple description of the wireless station.
To Add a Wireless MAC Address filtering entry, click the
Add New…
button. The "
Add or Modify
Wireless MAC Address Filtering entry
"
page will appear, shown in Figure 4-25:
Page 53 / 146
Archer C7
AC1750 Wireless Dual Band Gigabit Router
- 43 -
Figure 4-25 Add or Modify Wireless MAC Address Filtering entry
To add or modify a MAC Address Filtering entry, follow these instructions:
1.
Enter the appropriate MAC Address into the
MAC Address
field. The format of the MAC
Address
is
XX-XX-XX-XX-XX-XX
(X
is
any
hexadecimal
digit).
For
example:
00-0A-EB-B0-00-0B.
2.
Give a simple description for the wireless station in the
Description
field. For example:
Wireless station A.
3.
Select
Enabled
or
Disabled
for this entry on the
Status
drop-down list.
4.
Click the
Save
button to save this entry.
To modify or delete an existing entry:
1.
Click the
Modify
in the entry you want to modify. If you want to delete the entry, click the
Delete
.
2.
Modify the information.
3.
Click the
Save
button.
Click the
Enable All
button to make all entries enabled
Click the
Disable All
button to make all entries disabled.
Click the
Delete All
button to delete all entries.
Click the
Next
button to go to the next page.
Click the
Previous
button to return to the previous page.
For example:
If you desire that the wireless station A with MAC address 00-0A-EB-B0-00-0B and
the wireless station B with MAC address 00-0A-EB-00-07-5F are able to access the router, but all
the other wireless stations cannot access the router, you can configure the
Wireless MAC Address
Filtering
list by following these steps:
1. Click the
Enable
button to enable this function.
Page 54 / 146
Archer C7
AC1750 Wireless Dual Band Gigabit Router
- 44 -
2. Select the radio button “
Allow the entries specified by any enabled entries in the list to
access
” for
Filtering Rules
.
3.
Delete all or disable all entries if there are any entries already.
4. Click the
Add New...
button.
1)
Enter the MAC address 00-0A-EB-B0-00-0B/00-0A-EB-00-07-5F in the
MAC Address
field.
2)
Enter wireless station A/B in the
Description
field.
3)
Select
Enabled
in the
Status
drop-down list.
4)
Click the
Save
button.
5)
Click the
Back
button.
The filtering rules that configured should be similar to the following list:
4.6.5
Wireless Advanced
Choose menu “
Wireless 2.4GHz
Wireless Advanced
”, you can configure the advanced
settings of your wireless network.
Figure 4-26 Wireless Advanced
Transmit Power -
Here you can specify the transmit power of router. You can select High,
Middle or Low which you would like. High is the default setting and is recommended.
Page 55 / 146
Archer C7
AC1750 Wireless Dual Band Gigabit Router
- 45 -
Beacon Interval -
Enter a value between 20-1000 milliseconds for Beacon Interval here.
The beacons are the packets sent by the router to synchronize a wireless network. Beacon
Interval value determines the time interval of the beacons. The default value is 100.
RTS Threshold -
Here you can specify the RTS (Request to Send) Threshold. If the packet
is larger than the specified RTS Threshold size, the router will send RTS frames to a
particular receiving station and negotiate the sending of a data frame. The default value is
2346.
Fragmentation Threshold -
This value is the maximum size determining whether packets
will be fragmented. Setting the Fragmentation Threshold too low may result in poor network
performance because of excessive packets. 2346 is the default setting and is
recommended.
DTIM Interval -
This value determines the interval of the Delivery Traffic Indication Message
(DTIM). A DTIM field is a countdown field informing clients of the next window for listening to
broadcast and multicast messages. When the router has buffered broadcast or multicast
messages for associated clients, it sends the next DTIM with a DTIM Interval value. You can
specify the value between 1-15 Beacon Intervals. The default value is 1, which indicates the
DTIM Interval is the same as Beacon Interval.
Enable WMM - WMM
function can guarantee the packets with high-priority messages being
transmitted preferentially. It is strongly recommended.
Enable Short GI -
This function is recommended for it will increase the data capacity by
reducing the guard interval time
.
Enabled AP Isolation -
This function can isolate wireless stations on your network from
each other. Wireless devices will be able to communicate with the router but not with each
other. To use this function, check this box. AP Isolation is disabled by default.
Note:
If you are not familiar with the setting items in this page, it's strongly recommended to keep the
provided default values; otherwise it may result in lower wireless network performance.
4.6.6
Wireless Statistics
Choose menu “
Wireless 2.4GHz
Wireless Statistics
”, you can see the MAC Address,
Current Status, Received Packets and Sent Packets for each connected wireless station.

Rate

2 / 5 based on 3 votes.

Bookmark Our Site

Press Ctrl + D to add this site to your favorites!

Share
Top