Totolink N100RE Router Manual PDF (Setup & Configuration Guide)

Page 31 / 36 Scroll up to view Page 26 - 30

30

You can choose to enable or disable DMZ function.

IP Address:

types in the IP address of the DMZ host

5.5 Management

5.5.1 Upgrade Firmware

This page allows you to upgrade the Access Point firmware to new version. Please note:

DO NOT power off the device during the upload because it may crash the system.

Current Firmware Version:

shows the current firmware version.

Firmware Date:

the date that you upgrade the current firmware.

Page 32 / 36

31

Firmware Upgrade:

select the firmware version on your computer then click

Apply

to

upgrade the firmware version.

5.5.2 DDNS

DDNS means Dynamic Domain Name System. The ISP often provides you with a dynamic

IP address when you connect to the Internet via your ISP. It means that the public IP

address assigned to your router changes each time you access the Internet. The Dynamic

DNS feature lets you assign a domain name to a dynamic WAN IP address. It allows the

router to update its online WAN IP address mappings on the specified Dynamic DNS server.

Once the router is online, you will be able to use the registered domain name to access the

router or internal virtual servers from the Internet. It is particularly helpful if you host a web

server, FTP server, or other server behind the router.

Before you user the Dynamic DNS feature, you have to apply for free DDNS service to the

DDNS service providers. The router provides up to three accounts from three different

DDNS service providers. This router supports three service providers: DynDns, no-ip and

3322. Please log in the websites to register for free DDNS service.

You could choose to enable or disable DDNS function.

Service Provider:

choose one service provider where you have applied for free DDNS

service.

Host Name:

type in the host name you registered from the DDNS provider.

User Name/Email Address:

enter the User Name or Email you registered from the DDNS

provider.

Password:

enter the Password or Key you set for the User Name.

5.5.3 Time Zone Settings

This page allows you to maintain the system time by synchronizing with a public time server

over the Internet.

Page 33 / 36

32

Local Time:

it shows the current time by default.

Enable NTP: NTP

means Network Time Protocol which is used to make the computer time

synchronized with its server or clock source, such as Quartz and GPS. It can provide

high-precision time correction and prevent harmful protocol attack by confirming encryption.

You need to check this box to activate this page.

Time Zone:

Select the Time Zone where the router is located.

Daylight Saving:

If the Time Zone you choose implements daylight saving time, please

select this option. By default, it is disabled.

Default NTP Server:

Please choose the corresponding NTP server to get right time. This is

optional.

Set the Time:

please set the right time according to your location.

5.5.4 System Log

This page can be used to set remote log server and show the system log.

Page 34 / 36

33

Click

Log Settings

button, it will display the page below:

Remote Syslog Server/IP Address:

enter an IP address that allows syslog remote

sending function while System log messages are sent to a remote server.

SMTP Server/IP:

enter a SMTP Server address.

Email Address:

enter an Email address.

Log Type:

you can choose one type for log.

Page 35 / 36

34

5.5.6 Save/Reload Settings

This page allows you to save current settings to a file or reload the settings from the file

which was saved previously. Besides, you can reset the current configuration to factory

default.

Config Backup:

click this button to save current settings to your local computer.

Choose File:

if you want to reload the settings from the file saved before, you could click

Choose File

button to choose the right file.

Config Restore:

you will be asked whether to restore your configuration using saved file

before.

Factory Default:

click this button to restore the router settings to the default factory

settings.

5.5.7 Password

This page allows you to change the password to login web interface of this router. Also you

can enable or disable the Remote Management function here.

Remote Management:

if you enable this function, you can manage the router remotely.

Port:

choose the Port number.

Rate

Popular Totolink Models

Famous Router IPs

Famous Router Companies

Bookmark Our Site

Share