Page 26 / 96
Scroll up to view Page 21 - 25
E-DOC-CTC-20080527-0012 v1.0
18
2
Thomson Gateway Basics
Phone LED
Broadband LED
Internet LED
TV LED
Red
Solid on
No wireless activity, no security
Blinking
Wireless activity, no security
Red/green
Toggling
Wireless client registration phase
Off
WLAN disabled
Colour
State
Description
Green
Solid on
VoIP service up
Blinking
VoIP activity
Off
VoIP service down
Colour
State
Description
Green
Solid on
DSL line synchronised
Blinking
Pending DSL line synchronisation
Off
No DSL line
Colour
State
Description
Green
Solid on
Internet connectivity, no activity
Blinking
Internet activity
Red
Solid on
Internet connection setup failed
Off
No Internet connection
Colour
State
Description
Green
Solid on
Set-Top Box (STB) connected to the Thomson Gateway
Blinking
Unknown STB connected to the Thomson Gateway
Off
No STB connected to the Thomson Gateway
Colour
State
Description
Page 27 / 96
E-DOC-CTC-20080527-0012 v1.0
19
2
Thomson Gateway Basics
Upgrade LED
Colour
State
Description
Blue
Solid on
Software upgrade ongoing
Off
No software upgrade ongoing
Page 28 / 96
E-DOC-CTC-20080527-0012 v1.0
20
2
Thomson Gateway Basics
2.1.2
WPS Button LED
WPS button
The Wi-Fi Protected Setup (WPS) button allows you to add new wireless clients to your network.
For more information, see
“3.1 Connecting Your Wireless Client via WPS” on page 28
.
WPS Button LED
Colour
State
Description
Green
Solid On
Client successfully registered via WPS
Orange
Blinking
WPS registration ongoing
Red
Blinking
Error occurred
Page 29 / 96
E-DOC-CTC-20080527-0012 v1.0
21
2
Thomson Gateway Basics
2.1.3
Ethernet LEDs
Ethernet LED
A LED may be provided per Ethernet port to indicate link integrity (or activity).
LED Status
Description
Off
No connection on this port
Solid on
Ethernet link up
Blinking
Data is flowing from/to this port
Page 30 / 96
E-DOC-CTC-20080527-0012 v1.0
22
2
Thomson Gateway Basics
2.2
Thomson Gateway GUI
Introduction
The Thomson Gateway Graphical User Interface (GIU) allows you to configure your Thomson Gateway using
your web browser.
Requirements
JavaScript must be enabled (this is the default setting) on your browser. For more information, consult the
help of your web browser.
Accessing the Thomson Gateway GUI
Proceed as follows:
1
Open your web browser.
2
Browse to
http://dsldevice.lan
or to the IP address of your Thomson Gateway (by default:
192.168.1.254
).
3
If you have protected your Thomson Gateway with a user name and password, the Thomson Gateway
will prompt you to enter these. Enter your user name and password and click
OK
.
4
The
Thomson Gateway GUI
appears.
Access the Thomson Gateway via UPnP
You can also access the Thomson Gateway GUI using the Internet Gateway Device (IGD) icon if your
computer runs one of the following operating systems:
±
Windows 7
±
Windows Vista
±
Windows XP
For more information, see
“7.1 UPnP” on page 62
.
19216811.live