Page 51 / 96
Scroll up to view Page 46 - 50
E-DOC-CTC-20080527-0012 v1.0
43
4
Telephony
4.3.1
Services supported by Your Service Provider
Procedure
To see which services are supported by your provider:
1
Browse to the
Thomson Gateway GUI
.
2
On the
Toolbox
menu, click
Telephony
.
3
In the
Navigation bar
, click
Configure
.
4
In the
Pick a task
list, click
View Telephony Services
.
5
Under
Telephony Services
, you can see the services that are supported by your provider.
Activation
If you want to use one of the supported services, make sure it is activated. For more information, see
“4.3.2 Activating a Telephony Service on your Thomson Gateway” on page 44
.
Page 52 / 96
E-DOC-CTC-20080527-0012 v1.0
44
4
Telephony
4.3.2
Activating a Telephony Service on your Thomson Gateway
How can I (de)activate a service on my Thomson Gateway?
You can (de)activate services in two ways:
±
Via (de)activation codes on your phone.
±
Via the
Thomson Gateway GUI
.
Activating a Telephony Service via Your Phone
Where can I find the (de)activation codes?
Proceed as follows:
1
Browse to the
Thomson Gateway GUI
.
2
On the
Toolbox
menu, click
Telephony
.
3
In the
Navigation bar
, click
Configure
.
4
In the
Pick a task
list, click
View Telephony Services
.
5
In the
Telephony Services
table, you can find the activation and deactivation codes.
Using the codes
To (de)activate one of the services just dial the corresponding code on your phone.
For example, to activate
Call Hold
dial *94; to deactivate the service dial #94.
Activating a Telephony Service via the Thomson Gateway GUI
Proceed as follows:
1
Browse to the
Thomson Gateway GUI
.
2
On the
Toolbox
menu, click
Telephony
.
3
In the
Navigation bar
, click
Configure
.
4
In the
Pick a task
list, click
View Telephony Services
.
5
In the
Navigation bar
, click
Configure
.
6
To:
²
Activate a service select the check box next to the service.
²
Deactivate a service clear the check box next to the service.
7
Click
Apply
.
Page 53 / 96
E-DOC-CTC-20080527-0012 v1.0
45
4
Telephony
4.3.3
Using Telephony Services
Introduction
This section provides an overview of the functions that will be available if you activate one of the following
services:
±
Call Hold service
±
Call Waiting service
±
Conference Call (3 Party) service
±
Call Transfer
For more information on the other services, please contact your service provider.
Call Hold service
If the
Call Hold
service is activated, you can use the following functions:
To...
Press...
Illustration
Put an active call on hold and enable a call set up
(the dial tone is generated)
R, 2
Terminate the call on hold
R, 0
Terminate an active call and switch to the call on
hold
R, 1
Retrieve the call on hold (when there is no active
call)
R, 1
Terminate an active call and enables a call set up
(the dial tone is generated)
R, 9
B
A
You
on hold
dial tone
B
A
You
active
You press
R, 2
B
A
You
active
B
A
You
active
on hold
You press
R, 0
B
A
You
active
B
A
You
active
on hold
You press
R, 1
B
A
You
active
B
A
You
on hold
You press
R, 1
B
A
You
dial tone
on hold
B
A
You
active
on hold
You press
R, 9
Page 54 / 96
E-DOC-CTC-20080527-0012 v1.0
46
4
Telephony
Call Waiting service
If the
Call Waiting
service is activated, you can use the following functions:
Conference Call (3 Party) service
If the
Conference Call (3 Party)
service is activated, you can use the following functions:
To...
Press...
Illustration
Terminate an active call and switch to an
incoming call
R, 1
Reject an incoming call
R, 0
Switch between an active call and a call on hold
R, 2
Switch between an active call and an incoming
call
R, 2
B
A
You
active
B
A
You
active
incoming
You press
R, 1
B
A
You
active
B
A
You
active
incoming
You press
R, 0
B
A
You
on hold
active
B
A
You
active
on hold
You press
R, 2
B
A
You
on hold
active
B
A
You
active
incoming
You press
R, 2
To...
Press...
Illustration
Establish a conference call (or 3 party
connection)
R, 3
During a conference call: put B and C on hold
R, 2
During a conference call: retrieve B and C when
they are on hold
R, 3
B
A
You
active
active
B
A
You
on hold
active
You press
R, 3
B
A
You
on hold
on hold
B
A
You
active
active
You press
R, 2
B
A
You
active
active
B
A
You
on hold
on hold
You press
R, 3
Page 55 / 96
E-DOC-CTC-20080527-0012 v1.0
47
4
Telephony
Call Transfer
If the
Call Transfer
service is activated, you can use the following functions:
To...
Press...
Illustration
Transfer a call
R, 4
B
A
You
active
B
A
You
on hold
active
You press
R, 4
19216811.live