Page 11 / 100
Scroll up to view Page 6 - 10
E-DOC-CTC-20090507-0002 v1.0
5
1
Installation
1.2
Installing your Thomson Gateway
Overview
How it works
The Setup and User Guide will first help you to connect your computer to the Thomson Gateway. After this is
done, you can configure your Thomson Gateway using your web browser.
Requirements
Javascript must be enabled on your web browser.
Getting started
Proceed with
”1.2.1 Manual Installation” on page 6
.
Page 12 / 100
E-DOC-CTC-20090507-0002 v1.0
6
1
Installation
1.2.1
Manual Installation
Procedure
Proceed as follows:
1
Connect the cables
2
Configure the Thomson Gateway
Connect the cables
Proceed as follows:
1
Connect the Thomson Gateway to the DSL line.
2
Connect the power supply.
3
Turn on the Thomson Gateway.
4
Connect your computer to the Thomson Gateway as described in
”1.3 Adding a New Computer to your
Network” on page 7
.
Configure the Thomson Gateway
You are now ready to configure your Internet connection and local network.
Proceed as follows:
1
Open your web browser, and browse to
http://dsldevice.lan
or to the IP address of your Thomson
Gateway (by default:
192.168.1.254
).
2
The Thomson Gateway GUI appears. Click the
Thomson Gateway
menu item on the left-hand side.
3
The
Thomson Gateway
page appears. In the
Pick a task
list, click
Setup
.
4
The
Easy Setup
wizard appears. This wizard will guide you through the configuration of your Thomson
Gateway.
5
Click
Next
and follow the instructions.
6
After running the
Easy Setup
wizard, you are connected to the Internet.
For more information, see
” Setting up your Thomson Gateway” on page 45
.
Page 13 / 100
E-DOC-CTC-20090507-0002 v1.0
7
1
Installation
1.3
Adding a New Computer to your Network
Overview
If you want to connect your computer to the Thomson Gateway using:
±
A Wireless connection, continue with
”3 Wireless Access” on page 17
.
±
An Ethernet cable connection, continue with
”1.4 Connecting a Computer Using the Ethernet Cable” on
page 8
.
Page 14 / 100
E-DOC-CTC-20090507-0002 v1.0
8
1
Installation
1.4
Connecting a Computer Using the Ethernet Cable
Requirements
±
Your computer must have a free Ethernet port.
±
Your computer must be configured to obtain an IP address automatically. This is the default setting.
Ethernet cable
In your package, you will find a cable with yellow connectors. This is the Ethernet cable.
Procedure
Proceed as follows:
1
Connect one end of the Ethernet cable to the yellow Ethernet port(s) of your Thomson Gateway:
2
Connect the other end of the Ethernet cable to your computer.
3
Your computer is now connected to your network. No additional configuration is needed.
Page 15 / 100
E-DOC-CTC-20090507-0002 v1.0
9
2
Thomson Gateway Basics
2
Thomson Gateway Basics
In this chapter
Topic
Page
Thomson Gateway LED Behaviour
10
Thomson Gateway GUI
15
Backing Up/Restoring your Configuration
16
19216811.live