Page 21 / 76
Scroll up to view Page 16 - 20
Chapter 2: WEB Configuration
14
Illustrations contained in this document are for representation only.
Outline of Web Manager
The main screen will be shown as below.
Fig. 5
Main Menu
: the hyperlinks on the top of the page.
Title
: the sidebar on the left side of the page indicates the title of this management interface, e.g.,
Software in this example
Main Window
: the current workspace of the web management, containing configuration or status
information
For easy navigation, the pages are organized in groups, with group names main menu, individual page
names within each group are provided in the sidebar. To navigate to a page, click the group hyperlink at
the top, then the page title on the sidebar.
Your cable c
ompany may not support the reporting of some items of information listed on your gateway’s
internal web pages. In such cases, the information field appears blank. This is normal.
Page 22 / 76
Chapter 2: WEB Configuration
Illustrations contained in this document are for representation only.
15
Status
1. Software
The information section shows the hardware and software information about your gateway.
The status section of this page shows how long your gateway has operated since last time being powered
up, and some key information the Cable Modem received during the initialization process with your cable
company. If
Network Access shows ―Allowed,‖ then your cable company has configured your gateway to
have Internet connectivity. If not, you may not have Internet access, and should contact your cable
company to resolve this.
Fig. 6
Page 23 / 76
Chapter 2: WEB Configuration
16
Illustrations contained in this document are for representation only.
2. Connection
This page reports current connection status containing startup procedures, downstream and upstream
status, CM online information, and so on.
The information can be useful to your cable company’s support
technician if you’re having problems.
Fig. 7
Page 24 / 76
Chapter 2: WEB Configuration
Illustrations contained in this document are for representation only.
17
3. Password
This page is used to change the password that enables you to access the gateway web pages next time.
The default User ID is
“ ”(EMPTY)
, and the password is
―
admin
”
. The password can be a maximum of 8
characters and is case sensitive. In addition, this page can be used to restore the gateway to its original
factory settings. Use this with caution, as all the settings you have made will be lost. To perform this reset,
set
Restore Factory Defaults
to
Yes
and click
Apply
. This has the same effect as a factory reset using the
rear panel reset switch, where you hold on the switch for 15 seconds, then release it.
Fig. 8
Page 25 / 76
Chapter 2: WEB Configuration
18
Illustrations contained in this document are for representation only.
4. Diagnostics
This page offers basic diagnostic tools for you to utilize when connectivity problems occur. When you
ping an Internet device, you send a packet to its TCP/IP stack, and it sends one back to yours. To use the
ping Test, enter the information needed and press
Start Test
; the Result will be displayed in the lower part
of the window. Press
Abort Test
to stop, and
Clear Results
to clear the result contents.
Note: Firewalls may cause pings to fail but still provide you TCP/IP access to selected devices behind
them. Keep this in mind when pinging a device that may be behind a firewall. Ping is most useful to verify
connectivity with PCs have no firewall, such as the PCs on your LAN side.
Fig. 9
19216811.live