90
E-DOC-CTC-20051017-0149 v1.0
Chapter 5
SpeedTouch™ Web Interface
Details of a security
level
To view the details of the currently active security level:
1
In the
Toolbox
menu, click
Firewall
.
2
Click the
Details
link.
Following information is provided per rule that is part of the security level
±
The
name
of the rule
±
The
Action
that is applied on the traffic when the rule is valid
±
The
Source
and
Destination interface
or
IP address
(range) to which the rule
applies
±
The protocol or SpeedTouch™
Service
for which the rule applies.
±
The number of
Hits
(number of times that the rule was applied to traffic).
Creating a new security
level
Proceed as follows:
1
In the
Toolbox
menu, click
Firewall
.
2
In the upper right corner, click
Configure
.
3
In the
Pick a task
list, click
Create a new Security Level
.
4
In the
Name
box, type a name for the new security level.
5
Choose an existing security level to clone from.
6
Click
Apply
.
Editing a security level
Proceed as follows:
1
In the
Toolbox
menu, click
Firewall
.
2
In the upper right corner, click
Configure
.
3
Select a security level, and then click the
Edit
link.
The firewall settings of the selected security level appear.
4
You can:
±
Select a row using the
Edit
link to modify the security rule.
±
Click
Add
to create a new security rule.
5
Edit or define following parameters of the rule:
±
The
Name
of the security rule
±
The
Source Interface
and
IP Address
(range)
Or you can type a
User-defined
IP address (range).
±
The
Destination Interface
and
IP Address
(range)
Or you can type a
User-defined
IP address (range).
±
The
Service
type of the traffic; this can be a protocol (dns, smtp, ...) or a
specific SpeedTouch™ system service.
Use
Any
as IP address in case all traffic for the interface should
be parsed.
Use
Any
as IP address in case all traffic for the interface should
be parsed.
19216811.live